To implement an ERP-system is not an easy process. The success of the implementation depend on many different variables. The most important one is perhaps the requirement process, to define what the organization wants and expects from the system. In this study, the advantages of a process mapping are examined, in relation to the phase where the requirements are expressed in an ERP-implementation. The conclusion is that a process mapping generates an increased communication with the supplier of the ERP-system, hence the business knows their processes and thereby what they want from the system.

Denna kvalitativa motivationsstudie utfördes på åtta svenska toppsäljare och utgick i från Vallerands hierarkiska modell om inre och yttre motivation (1997) och även från Czikszentmihalyis teori om flow (1990). Syftet med studien var att ta reda på vilka motivationsfaktorer som förenar toppsäljare. Toppsäljarna intervjuades enskilt genom en semistrukturerad intervjuguide. En tematisk analys utfördes på utskrifterna från intervjuerna och analysen undersöktes utifrån tre huvudkategorier: inre motivation, yttre motivation, och flow. Resultatet visade att toppsäljarna hade en stark inre drivkraft att utvecklas, att nå egna mål och uppnå positiva känslotillstånd av själva utförandet.

We are always surrounded by space, not just only in a room with four walls, but also when we are outdoors.Constantly we move in a flow of space that changes whenever we move. Unaware we are affectedby this threedimensional surrounding of ours, and it reacts with our perception. Many times, we chooseto translate it into something two-dimensional, for example when we take a photo, recording a movie orframing a view with a window. It helps us to catch a moment, a piece of reality and restore it in our ownway. In this project I?ve chosen to explore this process, to interpret and create my own theories about thistranslation from space to a two-dimensional surface.

Saab Component Maintenance in Linköping, Sweden, offers maintenance, repair andoverhaul (MRO) services for civilian and military aircraft components. Lately, thedepartment has struggled with slow throughput rates, despite various counteractingattempts. Studies show, that large parts of the delays derive from the logisticsdepartment where goods arrive and dispatch. Therefore, Saab wants to carry out anextensive analysis of the department in order to further investigate what is causing itsslow throughput rates.The thesis begins with extensive mapping over Component Maintenances whole valuestream to find out how departments interact with each other and which roleindividual departments have in the total supply chain. Out of 13 000 different partnumbers, components were divided into five product families.

The aim of this Master?s thesis is to investigate the meaning the reading group of the public library has to a number of users. To fulfill the aim the following three questions have been formulated: 1) What do a number of users expect from the reading group of the public library? 2) Which approach/attitude or approaches/attitudes do a number of users have to reading and to talking about reading? 3) How do a number of users experience the ongoing reading group?The research is founded on qualitative interviews with five users that take part in three different reading groups in public libraries. The theories that are used is the theory of three so called strategies - the pragmatic, the traditionalistic, the emancipatory ? and the theory of flow.

SUMMARYInventory of raw materials holds an important role in companies within the manufacturingsector. The inventory works as a buffer that secure the supply of materials to the productionunit. The aim of the inventory is to ensure that the company is able to meet the customers?demands despite fluctuations and variations in the material flow. The size of the warehouseand the layout are physical limitations for the quantity of articles that can be stored.

Self-driving cars are soon to become a reality to the commercial market. A self-driving car does not have a human operator, which enables some interesting characteristics. The main benefits are considered to be:The number of accidents and traffic jams should be reduced.Enhanced comfort.Energy usage could be decreased while capacity could be increased.This study concerns the causes for improved energy efficiency. The reason for improved energy efficiency is mainly because of the variation in terms of acceleration, braking and distance holding are reduced. The vehicles are more intelligent and can work together as a unity.

SUMMARYInventory of raw materials holds an important role in companies within the manufacturingsector. The inventory works as a buffer that secure the supply of materials to the productionunit. The aim of the inventory is to ensure that the company is able to meet the customers?demands despite fluctuations and variations in the material flow. The size of the warehouseand the layout are physical limitations for the quantity of articles that can be stored.

Severe floods caused by heavy autumn rains in year 2000 raised the question whether measures to reduce the damage from high water levels, in the area surrounding lake Glafsfjorden and along the river Byälven down to lake Vänern, are possible. One option is to reduce flow resistance along the river and thereby lower the maximum water level a given inflow would cause. Good knowledge of hydraulic and hydrological conditions is necessary in order to estimate the effect of such flow-reducing measures. In order to quantify such effect a 1-dimensional hydraulic flow model has been set up for the river Byälven using the software package MIKE 11. The model is more detailed, especially concerning topography and bathymetry, than earlier models used for studies of the river.

SUMMARYInventory of raw materials holds an important role in companies within the manufacturingsector. The inventory works as a buffer that secure the supply of materials to the productionunit. The aim of the inventory is to ensure that the company is able to meet the customers?demands despite fluctuations and variations in the material flow. The size of the warehouseand the layout are physical limitations for the quantity of articles that can be stored.

In Halland, agriculture is the major source of eutrophication of water. In the study, synoptic sampling were performed in the three watercourses Nyrebäcken, Skintan and Vinån all located in the county of Halland. Sampling occurred during the period February to May on three occasions with different flow rates: high, low and base flow. Samples were taken in the mainstream and tributaries with intention to show how big the impact of eutrophication it is in the water and  to assess the impact of the tributariesThe results show that all watercourses are affected by eutrophication. Nyrebäcken has the highest concentrations of nitrogen and phosphorus in the mainstream, then Skintan and last Vinån.

Saab Training Systems (STS) in Huskvarna is manufacturing material for educationalpurposes to armies worldwide. They are now implementing parts of the Lean productionconcept in their organisation.One part of the work with Lean production is to eliminate waste. To be able to identify waste,value stream mapping is a good tool and also what we used in our thesis. To gain a betterefficiency in the production of Personnel Detector Device (PDD) flow was one of our goals.The PDD is a harness used during battle training which registers if the user is being hit by itsenemy.Our work with the thesis started up with a short education in Lean production and in valuestream mapping (VSM). The work proceeded with a VSM of the production flow of the PDD,interviews were made and studies of literature were done to gain greater knowledge of thesubject and solve the task.The VSM resulted in five areas which were followed up out of those six we identified.

This report is the result of a thesis at the company Sanmina in O?rnsko?ldsvik. The thesis is the final work at the mechanical engineering program at Umea? University.Sanmina has in 2015 launched an initiative to ensure that all sites are using LEAN principles and tools to enhance their business. As part of the plan for the LEAN-work, an LSS (Lean Six Sigma)-project has started to study the company's receivehall and inspection.

An often encountered problem when implementing a mass flow regulator in a rolling mill is the one with measurement of speed. The most widely used solution is to fit a pulse counter to a wheel that is in contact with the strip. Common problems with this design are for instance scratch marks on the strip and problems with the flatness measuring system.  One way of circumventing the aforementioned problems would be a non-contact measuring system. The market of today only offers systems based on the Doppler principle.This report evaluates three different systems for non-contact speed measurement. Important areas in the evaluation have been the ability to operate under normal rolling conditions, integration in existing control system and how well the sensor can be fitted to the rolling mill.

An often encountered problem when implementing a mass flow regulator in a rolling mill is the one with measurement of speed. The most widely used solution is to fit a pulse counter to a wheel that is in contact with the strip. Common problems with this design are for instance scratch marks on the strip and problems with the flatness measuring system.  One way of circumventing the aforementioned problems would be a non-contact measuring system. The market of today only offers systems based on the Doppler principle.This report evaluates three different systems for non-contact speed measurement. Important areas in the evaluation have been the ability to operate under normal rolling conditions, integration in existing control system and how well the sensor can be fitted to the rolling mill.