To invent an optimized product is a complicated process. This process is only half of the work. It is equally important to develop a production system that can produce the product in an  efficient and ergonomic way.After several evaluations of conceptual and detailed drawings a final idea has come to light.The idea intends, to the maximum extent, utilize the facility in a more efficient way through moving assembly lines and stations closer to the flock section and the stock for complete products. To make the production better, stations are placed in more logical places given the assignment they are supposed to accomplish. This improves the material flow radically.

The purpose of this report is to come up with possible improvement suggestions to the distribution central at Götene Stål & Verktygs AB (GSV). GSV is a wholesale dealer located in Götene. The company doesn?t produce anything it self, it buys in products and sells them to customers.The distribution central at GSV is the place where the products comes in and gets ready to deliver.To come up with possible improvement suggestions we started with process mapping over the main process and the distribution centre process. The main process here is from the point where the customer gives GSV an order to the point where GSV deliver the order.Our result shows that the major problem in the distribution central at GSV is the big volume differences in the incoming goods.

When several production units provide a district heating network, water is pumped from different directions. When the flows from the plants finally meet in the network, the water can be completely still. These places are called zero flow zones. In district heating networks with several plants, which also have different supply temperatures, large and frequent temperature fluctuations can occur when the zero flow zones move. This may cause wear on the pipes, a phenomenon called low cycle fatigue.For this reason it is important to examine where and when zero flow zones that cause temperature changes occur.

I ?Skolbarns hälsovanor? har sedan 1985 frågan ?Vad tycker du om skolan nu för tiden?? funnits med. Skoltrivseln minskar med åldern och till skillnad från många andra frågor skiljer sig pojkars och flickors uppfattning i denna fråga mest i den yngsta åldersgruppen, då flickorna i högre utsträckning uppger att de trivs mycket bra i skolan (Svenska barns hälsovanor, FHI 2005). I den här studien undersöks hur åtta 12-åriga svenska skolflickor i en västsvensk småstad upplever sin skolvardag. Min metod har varit att fastställa deras KASAM-värde genom en enkät (Margalit & Efrati, 1996) baserad på Antonovskys frågeformulär för att mäta Känsla Av Sammanhang (Antonovsky, 1987)och sedan intervjua dem enskilt om trivsel, flow och beröm i skolan.

The main project Dry preservation of source-separated organic household wastes involves a new technique for treatment of biowaste through drying. Investigations are going on to determine how the dried biowaste best can be used to close the natural circular flow of nutrients. The objective of this degree project is to determine if the dried biowaste can be used as a soil conditioner. By restoring the nutrients in the material to the ground, the natural circular flow is closed. A declaration of contents, including the nutrient levels, C/N ratio, pH and the electrical conductivity of the dried biowaste, was constructed and a germination test was done to make sure that the material did not inhibit sprouting.

IT-företaget Medius tillhandahåller en produkt för ärendehantering, Medius Flow. I denna produkt finns ett visst stöd för dokumenthantering, närmare bestämt en möjlighet att klassificera dokument och lagra dem via Medius Flow. En av Medius kunder har efterfrågat mer funktionalitet och möjligheter att kunna sätta rättigheter på dokument, alltså bestämma vem som ska ha tillgång till ett specifikt dokument.Examensarbetet har gått ut på att undersöka olika lösningar för att implementera dokumenthantering i Medius Flow, utvärdera dessa och sedan implementera den lösning som verkar vara bäst.Efter att en kundintervju utförts framkom krav på systemet i form av bland annat utökade rättighetsfunktioner, möjlighet att skapa arbetsflöden och att man lätt ska kunna hitta dokumenten.Tre olika lösningsförslag togs fram. Det första gick ut på att vidareutveckla den dokumenthantering som finns i Medius Flow idag. Det andra gick ut på att använda sig av ett tredjepartsdokumenthanteringssystem och sedan bygga en integration mellan Medius Flow och detta system.

Detta arbete a?r en sja?lvstudie i att utveckla improvisation pa? saxofon. Syftet a?r att utforska hur det a?r mo?jligt att uppna? en niva? av frihet i det improviserade spelet. En grundtanke som presenteras i inledningen a?r att all musik egentligen kommer ur improvisation.

My bachelor?s dissertation concerns the creation of a proposal for interior decoration of the Boland High School?s canteen. I have been in contact with personnel, students and the school principal through the duration of the project. In the end, substantive changes of lighting, interior decoration and movement were proposed for the canteen. In the proposal I have focused on accentuating the school?s profile, on creating smaller spatial configurations within the larger configuration of the room, lowering the noise level, creating a good movement flow, increase the number of seats and creating a pleasant environment in which to eat..

Today's fierce competition means that companies constantly must develop their business and internal processes. Focus on processes and continuous improvement is something that characterizes Lean Production which ICA logistics are applying with their concept Leading Logistics. Standardized routines for handling damaged gods were insufficient at the ICA distribution center in Kungälv. Handling and registration of damaged gods were not performed uniformly, resulting in problems with controlling and monitoring the process.The purpose of this thesis was to analyze and make recommendations how the process of internal handling of damaged gods could be improved. Therefore a comprehensive understanding was needed of the entire material flow through the warehouse and important quality aspects such as product safety and delivery reliability.The methods used are literature reviews, interviews and observations to produce a comprehensive process mapping of the current situation at the distribution center.

Studiens syfte är att ur ett symbolisk interaktionistiskt synsätt försöka förstå vad som motiverar vuxna amatörskådespelare, amatörsångare och amatörmusikalartister att delta i ideella konstnärliga projekt. Något annat som studien tar reda på är om konstutövandet och gruppen de deltar i har någon inverkan på individens identitet och identitetsskapande. Genom nio semistrukturerade intervjuer skapas en förståelse kring motivationen och identitetsskapandet. Detta förklaras sedan genom motivationsteorier samt teorier kring identiteten, där det visar sig att gemenskapen i gruppen, konstnärlig utmaning och utveckling, deltagandet i den konstnärliga processen, känslan av flow, själva utförandet och dess påverkan på välbefinnandet, viljan att uttrycka sig samt personlig utveckling var de huvudsakliga motivationsfaktorerna. Det visar sig även att både det konstnärliga utförandet och gruppen har en inverkan på individens identitet och identitetsskapande..

A patient simulator for testing anaesthesia machines has been developed at Maquet Critical Care AB, to reduce costly and time-consuming experiments on animals. The device simulates human lungs regarding lung dynamics and volume, uptake of anaesthetic agents and the production of carbon dioxide, heat and moisture. Further demands on the simulator are durability and size; the device shall be compact enough to be moveable.The resulting simulator fulfils the requirements and enables better repeatability and ability to test extreme cases than experiments on animals do.Uptake of the anaesthetic agent is achieved in a active carbon filter and controlled by regulating the flow. The flow is created by a regenerative blower and controlled using a proportional valve. The uptake can be set by the user or by a simple uptake model modified to recursively handle changes in the concentration of anaesthetic agent.Carbon dioxide is fed into the system from a tank by a mass flow regulator.

Development and construction of an electronic Breakout box is the main work for this thesis. The box is a part of a test system for the component Fuel Flow Transmitter and should convert signals to be suitable for a frequency counter. A previously constructed Breakoutbox for this purpose is being old and needed to be recreated. So SAAB Aerotech, Aircraft services, the company for the thesis work wanted to construct a new, more sustainable Breakoutbox adapted to a more modern technology. The signals to the box comes from the transmitter and should be converted to suitable signals for a frequency counter so it can show pulse and time difference between the signals.

This Master degree project has been performed at the Braviken paper mill on papermachine 53 (PM53) which produces newsprint paper. The current economic situationhas contributed to declining demand for newsprint, which means it is extra important tobe competitive by high energy efficiency. Particularly as energy prices are expected torise when the economic growth returns.One way to increase energy efficiency is by reducing the water use in paper and pulpmills and consequently save energy through reduced heating of water. The thesis's maintask is to evaluate whether a water purification plant (microflotation plant) forpurification of process water in PM 53 is profitable. The microflotation plant enablesreuse of warm process water instead of losing the energy to receiving waters.

The most important conclusion of this study is that the negotiations between the parties ends when conflicts arise from property owners, and with this the time will be extended and be more costly. During the study it has been shown that good communication is the key to an effective and successful negotiation between the parties.The purpose of this study is to investigate how the practical procedure under expropriation is in relation to the legal text, in other words, describe and analyze the procedure for expropriation under current rules but also to explain how it operated in practice. This is to get a picture of how the process works and what effects it receives.Three methods were used for the study. A literature review for understanding how expropriation relates according to the law. A case study from an ongoing expropriation in Sundsvall municipality, and an interview with seven affected interested parties from the expropriation.Reviewed literature describes how the application of the Expropriation Act must go to as well as other research on the topic.

Millions of preselected progeny have been born since the development of The Beltsville Sperm Sexing Technology 1986. The method is based on flow cytometry and sorting is done on the basis of DNA difference of the X- and Y-chromosomes. Preselection of progeny provides an opportunity to obtain genetic gain and increased production as well as increased animal welfare and decreased environmental impact. However, the method is associated with low fertility, high costs and uncertainty whether the sorting process contributes to DNA damage and thereby results in genetically impaired progeny. Today, sex sorted sperm is only commercially available in the bovine industry, due to the fact that bull sperm is more suitable for selection than sperm from other species.