The Volvo Trucks plant in Umeå is a highy complex manufacturing facility where the same production line handles a variety of different models. This require flexible and agile processes with high quality standards. This thesis studies the flow of material through a production line and how Volvo can use their existing manufacturing monitoring system to optimize the flow of materials.The goal with the thesis is to identify eventual problems with the flow of materials and to deliver a few proposals on how the production line can improve its productivity. The theory of LEAN, Just-In-Time and Supply Chain Management serves as the scientific reference to this project. By analyzing the flow of material, performing interviews and observing the processes a few problems are identified.

At Forsmark nuclear power plant a new course called "education in everyday safety" has been started in an attempt to improve the safety culture. The goal is to spread the of expectations and approach the maintenance management has set, to all employees working at the plants. During the course, theory is mixed with practical tasks to reach a common view how work should be done to achieve safety for the plant and the people that work there.The practical tasks are done inside "maintenance simulators". They are built inside 20 ft containers which contains two dummy pipe systems. On the pipe systems some valves, a flow meter and a pump has been installed.

Hur kan svårighetsprogression användas i skapandet av Puzzlehunts med syfte att uppnå en ökad upplevd känsla av flow hos spelaren? Denna frågeställning behandlas i uppsatsen och problemet som måste lösas är hur man kan bygga upp en ackumulerad kunskap om något vars syfte är att hela tiden tvinga dig att hitta nya lösningar på problem. I mer traditionella spel kan upprepning lära spelaren hur spelmekaniken fungerar. I puzzlehunts kan upprepning av spelmekanik inte användas eftersom målet för varje pussel är att hitta mekaniken som löser problemet. Uppsatsen visar att man genom inlärning av hur man skall tänka för att hitta lösningarna till pusslen kan bygga upp en ackumulerad kunskap hos spelaren och därmed även ha en svårighetsprogression och öka upplevd nivå av flow hos spelaren..

Tidigare studier har visat att faktorerna KASAM, flow samt prestationsbehov har betydelse för hög upplevd arbetstillfredsställelse. I denna studie undersöks om dessa faktorer även är aktuella under svenska förhållanden. En enkätundersökning genomfördes på 137 anställda på tre olika företag för att mäta om de tre faktorerna kan predicera arbetstillfredsställelse. Resultatet visade att KASAM, och särskilt komponenten meningsfullhet, var en stark prediktor av arbets-tillfredsställelse. Även flow, och särskilt dimensionen inomboende arbetsmotivation, hade ett signifikant prediktionsvärde medan det visade sig att prestationsbehov inte predicerade arbetstillfredsställelse.

This study tests two financial valuation models empirically by valuing three stocks from three industries, with the purpose of studying how well valuation models work empirically and to make a forecast. The models which will be tested are residual income valuation and discounted cash flow. Nine stocks will be picked strategically from the Swedish stock market and additional analysis will follow in the analysis chapter.Based on analysis and valuation, the commodities industry has decent valuation as the healthcare industry is undervalued thanks to the high valuation of AZN. The energy industry has low value due to the capital intensive nature of the industry. When it comes to the models and their practical implementation, DCF has been the most problematic to apply empirically whereas RIV was better but it still shows extreme values, which teaches the student the clear difference between theory and empiri..

For Swedish companies to compete with low wage countries, developments in theproduction industry moved towards streamlining the entire company. One of themost effective ways for a company to streamline their operations is to review theirproduction. All companies have processes in their production that add no value tothe product. In order to compete, they must be eliminated.The purpose of this report is to reduce work in process (WIP) in the flow ofbashus at Volvo Powertrain in Köping. The aim is also to try to find reasons whyVolvo Powertrain feel that they have problems with the storage principle First in-First Out (FIFO).To meet the objective, empirical studies were conducted at the company whilethe literature in the area was studied.

The ISO standard ISO/IEC 17799/SS-627799-2 is a guidance for organizations to realize their information security goals. In spite of this standard, studies show flaws regarding information security in organizations. In particular flaws regarding overall view, knowledge and clear roles and responsibilities have been observed. The ISIT (Information Security Integrated Three level) model and its guidelines, developed in this thesis, help organizations to identify the required processes and procedures as well as the logical process flow. The thesis is based on theoretical studies and a case study within a multinational company.

Results have shown that flow batteries may be a solution in the future as an effective and environmental friendly method to an energy storage system (ESS). The technology is reliable and has a high efficiency that comes with low energy losses and a long lifetime. The range of possible fields is suitable for cutting energy peaks in the power grid, by always have a ready and available energy storage that balances the production. By comparing the advantages of flow batteries with conventional batteries it is mainly the fact that they can conserve energy for a long time without being self-discharged thanks to that the storage capacity is in principle endless and limited by the size of the electrolytes tanks that makes them a great energy storage system. The batteries won?t take any damage or decrease in performance when charging or discharging it or if you exhausts it to 100 % and leave it discharged for a long time.

AbstractWith increasing population and increasing demands for comfort and thus an increase in energy demand, it is necessary to examine various energy-efficiency measures. This work deals with the ability to control the flow through the heating system to achieve the desired comfort with as little energy as possibleA heating system contains of different parts, roughly speaking, you can divide it to three main components: Heat source, Distribution and Heat emitters. All components are working together to bring heat to the building. What is examined in this report are different ways of adjusting the flow and supply temperature and how it affects comfort and energy use in a building.At today ?s date the conventional method is to use a high flow through the heating system, which affects pressure drop and cooling of the fluid.

This essay is a case study carried out at Flow Systems Ltd that foremost aims to treat the internal marketing at the company. The aim with the essay is to analyze and evaluate Flows internal marketing in connection with a process of change and how this reflects the external marketing in relation to customers.The method that has been used is qualitative in the form of depth interviews carried out with management, employees and customers. This type of data was chosen since it is a good way of gathering more specific information regarding the informants preferences about the company. Among other things the results of the interviews showed internal marketing deficiencies, but that has not influenced the customers in a negative way. The conclusion was that the inferior internal marketing does not affect the cooperation and the communication between the company and its customers, however it has a big effect on the employees..

Like many small-time companies there is a need to improve the flow of materials at HSP-Gripen AB. The company develops and manufactures hydraulic-powered grapples for the machine- and forest industry. By mapping the material flow in the current production and gathering necessary data, suggestions on how different parts of the production could be controlled is presented in this dissertation. This has been achieved by the study of relevant scientific literature. The suggested ways of controlling the production consist of 2-bin systems, hybrid material flow system as well as a cyclic product-planning.

The ISO standard ISO/IEC 17799/SS-627799-2 is a guidance for organizations to realize their information security goals. In spite of this standard, studies show flaws regarding information security in organizations. In particular flaws regarding overall view, knowledge and clear roles and responsibilities have been observed. The ISIT (Information Security Integrated Three level) model and its guidelines, developed in this thesis, help organizations to identify the required processes and procedures as well as the logical process flow. The thesis is based on theoretical studies and a case study within a multinational company.

Erythropoiesis is a complex and carefully controlled process which is mainly regulated by erythropoietin. Using flow cytometry cells in a blood sample can be analyzed one by one. ADVIA 2120 using flow cytometry for analysis of red blood cells (RBC) and reticulocytes. Red blood cell distribution width (RDW) is a component of the RBC method. RDW indicates size variation on erythrocytes and is measured as a percentage of the mean cell volume (MCV). By measuring the RDW anemia can be divided into makrocytic, microcytic or normocytic. Reticulocytes refract light more strongly than red blood cells because they contain some cellular debris. The number of reticulocytes in the peripheral blood reflects erythropoiesis in the bone marrow. The purpose of this project was that by approved methods to establish reference ranges for the parameters, RDW and reticulocyte counts.The individuals who participated in the study, n=124, were considered healthy and had varying ethnicity. Reference subjects had not donated blood the last six months and participation in the study was voluntary.The statistic evaluation includes examination of distribution, and reference ranges for both men and women were established using the 2.5:t and 97.5:t percentiles. The calculated reference interval for RDW was between 12.0 ? 14.3% and the calculated reference interval for reticulocytes was between 38.0 ? 112.8 x109 cells/L. The results showed a significant difference between males and females for the parameter reticulocytes was seen. The difference indicates that different reference ranges should be established for men and women (p<0,0001). No significant difference between males and females were seen for RDW (p=0,74) indicating that the same reference ranges can be used for both men and women. .

The upstream spawning migration of Atlantic salmon (Salmo salar) at the confluence area between the power-station outlet and the bypass-channel in river Umeälven (flow 430 m3s-1) was compared in 2004 and 2005, two years with different experimental flow-regimes. In 2004 the water flow in the bypass-channel was altered during the day with increased flows during the nights while the water flow in 2005 mainly was altered between the weekdays and weekends. Salmon showed altered migratory behaviour in this confluence area, assessed with telemetry (n=116) and echo-sounding, with up- or downstream responses depending on flow-changes in both the bypass and the power station outlet. Increased turbine flow through the power-station generally attracted salmon into the tunnel outlet area while increased spill-flows facilitated salmon to enter the bypass. Echo-sounding in the confluence area showed an increased swimming activity up- and downstream due to time in the day and flow-rates through the tunnel outlet. No changes in activity could be detected due to increasing or decreasing flow through the hydro-power facility.

This thesis work has introduced process orientation at the printing company Color Print Sweden AB. The outcome ofthis work is a survey of the work flow at the prepress department. To visualise the production process at the companya comprehensive mapping of the main process, order-to-delivery, has been made. The work has detected a couple ofcritical elements in the existing process. These elements are the following: initial check of material delivered to the prepressdepartment as well as the control made of the plotter print-out, digital test print and plate.