Background and problem: Financial reports are created for the users as decision support. Stakeholders are often subjects to information asymmetry. Banks represent one of the primary stakeholders and financiers of a company, and place great emphasis on financial reports in their credit assessment process. The question is, however, how useful the financial information actually is. According to previous research, banks consider accounting information as troublesome in some respects, mostly due to accounting choices and judgments.

Chemical substances are spread diffusely and uncontrollably as a result of the increased consumption of goods. REVAQ is a certification system that works to reduce the flow of hazardous substances to Swedish treatment plants and to create a sustainable nutrient recycling. According to REVAQ, the yearly accumulating rate of metals should not exceed 0.2% in soil per year. Silver and bismuth are two metals that do not fulfill this requirement. The silver concentration in sludge decreased during the last decade, however the last few years, it has leveled off.

Lerbodaälven is a river in the municipality of Kil which, due to high phosphorus content is not meeting the requirements for good ecological status according to the Water Framework Directive. The purpose of this report is to investigate the causes for the high content of phosphorus that has been measured in Lerbodaälven between 1995-2010. Four questions will be answered in this report. 1. Does the sewage treatment work affect the phosphorus level in Lerbodaälven? The result from the time series analysis shows that the sewage treatment works have a small impact on the phosphorus level in Lerbodaälven.

This is a qualitative study aiming to examine peoples? experiences when retiring. In that purpose a criteria based sample has been used, participants have been asked in that they fulfilled the criteria?s to be a retiree within the age of 65 to 71 years of age. The reason of the age criteria was that the experiences should not be so far away in time.

The goal of this project was to make the requirement process at the Swedish Coastguard more effective. The first step to achieve this was done by locating bottle necks in the process with value stream mapping method. The result of this study showed that the biggest restriction in the requirement process was while examining older requirement documents to understand what elements were suitable for the particular project. This was followed by a study of literature, interviews and theory of Lean Production with the ambition to investigate how the requirement process was handled on other companies and how to improve the process on the Swedish coast guard. This led to a number of potential enhancements of the process which later was evaluated.

Since 2004, wind power has had the largest installation of new capacity compared to other energy sources in Sweden. Accommodating new wind power may require strengthening or rebuilding of the existing grid in areas where the grid is already loaded to maximum capacity. This master thesis examine the possibility of a new 400/130 kV substation in Yttermalung, Sweden, with a connection to the two neighboring regional grids in Dalarna and Värmland owned by Fortum. This substation would provide a new connection point to the Swedish transmission system as well as an interconnection of the two, currently separated, regional grids. Different expansion scenarios where a substation with and without series compensation or a phase shifting transformer (PST) to control active power flow were studied.

        This is a report that describes the entire process of design of a measuring station for rolling resistance. The report is structured with elements of Fredy Olsson's method.The report also includes a brief presentation of HGF, the company that will manufacture the machine. Requirements and preferences are set up and used in a weighting of criteria by which product suggestions are based. These suggestions are used in the evaluation to produce a final draft product. Solutions to major functions are produced by criteria?s. Component selection for all components is performed, a CAD-based model is developed and an economic analysis is set up. FMEA analysis is set up. The report ends with a brief summary, critical review and suggestions for further work..

The problem of separating a non-rectangular foreground image from a background image is a classical problem in image processing and analysis, known as matting or keying. A common example is a film frame where an actor is extracted from the background to later be placed on a different background. Compositing of these objects against a new background is one of the most common operations in the creation of visual effects. When the original background is of non-constant color the matting becomes an under determined problem, for which a unique solution cannot be found. This thesis describes a framework for computing mattes from images with backgrounds of non-constant color, using Bayesian statistics.

The thesis that follows is performed in collaboration with Nitator in Oskarström.The factory in Oskarström focuses on laser cutting, robotic welding and surfacetreatment of steel for the automotive industry.The project aims to streamline the flow of materials in production by automatingthe movements of the forklifts, running to and from the interlayer, and betweenworkstations.The project started with a systematic literature search. The literature searchshowed the research position around the AGV-system. Also a review of studentliterature was made, so that a suitable method for practical implementation couldbe developed and applied. Selected method uses both quantitative and qualitativeapproaches, which is analyzed by using triangulation.The work has resulted in a modified layout of the current facility in Oskarströmthat can be used for the implementation of the AGV-system. It has also resulted inthe tender documents and profitability calculation from several of AGV-suppliers..

There have been significant changes in the agricultural sector during the past 20 years (Jordbruksverket, 2008). The development of today is towards deregulation and adaption to global market conditions. As farmers try to adapt to the changed and more competitive market conditions investments are often necessary (LRF Konsult et al, 2012). Loans to agriculture and forestry businesses have increased to record levels and debt has doubled over the past years. The financial turbulence of the past years has contributed to an increase of the meaningfulness and willingness of the banks to be able to understand and handle risks associated with agriculture and forestry (Breiding, 2010).

The aim of this thesis is to study why Swedish authorities do organizational changes. Two organizations are analyzed; The Swedish Tax Agency (Skatteverket) and the National Statistics Office of Sweden (Statistiska centralbyrån). A qualitative method, consisting mainly of interviews with key officials, is employed to study two aspects of organizational change: first, the main reasons for changing the organization and, second, how the process that preceded the actual change was carried out. Furthermore, two different theoretical perspectives are used to construct a basis for the analysis. One of the perspectives assumes a social constructivist approach, while the other is rationalistic inspired.

The purpose of this Masters thesis is to examine literature on current media events. We see a close relationship between this literature and the media society where we relate Manuel Castells theory of the network society. In this thesis we have chosen books which give different views on three major media events in Sweden: 1 the assassination of Anna Lindh, the former Swedish Minister for foreign Affairs; 2 the Knutby murder and; 3 the Tsunami disaster in Southeast Asia. These books combine fact and fiction in their writing which in media science is called faction. This form of writing has similarities to genres like new journalism and documentarism and can be problematic for the reader in terms of genre expectations because of the mix of fact and fiction.

Networking is an important part, for organizations, in the recruitment process. This since the emergence of Internet networking has become more common and the organizations finds that networking is applied more frequently in the recruitment process. Organizations have noticed that networking often is a more cost efficient option compared to traditional recruitment. Since networking in the recruitment process has increased, we intend to investigate if and how it affects the composition of organizations. This thesis aims to examine networking in the recruiting process, and aims to make no differences between networking offline and online.

In the year of 2009 the conditions for managing primary healthcare in the region of Västra Götalandchanged. The decision was taken by the regional assembly and resulted in that the citizens since thenhave had the opportunity to choose which health care provider they preferto stay with. Along with thisdecision a new market for private health careproviders was established, which resulted inincreasedcompetition between the providers.In order to manage the competition, the health care providers arenow forced to be more efficient in their operations andalso to beeven more focused on their patients.Backa Läkarhusgruppen is an example of a private healthcare provider in the region of Västra Götaland.In the same way it is also an example of anorganizationin need of analysing their operations to seehowit can be further optimized to meet patient needs and expectations.The aim of this study is to analyse Backa Läkarhusgruppen?s organization and its operationsin the hopeoffinding suggestions whichwill improve the patient flow.To allocate and solve the problems thatBacka Läkarhus suffer from,an approach inspired by Lean Healthcare is used throughout the report.Some of themost significant problems that were identified within the organization are:?The synchronization of demand and capacity is inadequate.?Absence of standardized routines.?Absence of present leadership.To be able to improve the patient flow Backa Läkarhus needs to handle these identified problem areas.By synchronizing the staffing level in relation to the trends in demand a reduction in the patient?swaiting times and throughput time will be possible. Creating clear responsibilities and routines for thestaff will contribute to a higher degree of patient focus and thus lead to a more efficient patient flow.

        This is a report that describes the entire process of design of a measuring station for rolling resistance. The report is structured with elements of Fredy Olsson's method.The report also includes a brief presentation of HGF, the company that will manufacture the machine. Requirements and preferences are set up and used in a weighting of criteria by which product suggestions are based. These suggestions are used in the evaluation to produce a final draft product. Solutions to major functions are produced by criteria?s. Component selection for all components is performed, a CAD-based model is developed and an economic analysis is set up. FMEA analysis is set up. The report ends with a brief summary, critical review and suggestions for further work..