The forestry companies? operational planning process is these days dependent on reliable, efficient and user-friendly computer-based support systems. This study is an evaluation of Holmen Skog's current computer-based systems. The aim of this study is to: ? investigate the work pattern of the production managers when using the information system to plan the harvesting operation; ? investigate the efficiency and user friendliness of the information system with the different work patterns and to find the strengths, weaknesses and bottlenecks in the current system; ? find out if the type of object, the volume, the area of the harvesting object affects the time and work pattern; ? examine how this type of study is met by the employees and what factors that is critical to avoid feelings of intrusion. The conclusions of the study were: ? there is a large variation between the work patterns of the production managers and the time spend to perform the operational planning; ? the mainframe computer system used by Holmen Skog is clear, has short response times, is robust and conveys relevant information; ? the computer systems are however divided in many subsystems.

In this paper the possibilities to replace metal with plastic in products for the building industry were looked into. The first part was a market examination where several suitable products were found. After evaluation the door latch for in-house doors was selected to be re-designed to better suit the properties of plastic.New types of mechanisms were designed with different functions that use the benefits of plastic materials. Models of these mechanisms were developed to evaluate their function. The components in the different mechanisms were adapted for manufacturing with injection moulding.To confirm that the plastic material could handle the appearing stresses calculations on the most vulnerable parts were carried out.

This thesis presents the results of the implementation and evaluation of two machine learning algorithms [Baz98, GB97]based on notions from Rough Set theory [Paw82]. Both algorithms were implemented and tested using the Weka [WF00]software framework. The main purpose for doing this was to investigate whether the experimental results obtained in [Baz98]could be reproduced, by implementing both algorithms in a framework that provided common functionalities needed by both. As a result of this thesis, a Rough Set framework accompanying the Weka system was designed and implemented, as well as three methods for discretization and three classi cation methods. The results of the evaluation did not match those obtained by the original authors.

Outsourcing, förflyttning av funktioner till extern part som tidigare funnits i företaget, är ett fenomen som under de två senaste årtiondena har vuxit starkt i världen. Outsourcing har möjliggjort för företag att fokusera på sin kärnverksamhet och därmed erhålla konkurrensfördelar. Business Process Outsourcing är en kategori inom detta område, som innebär att företaget outsourcar hela eller delar av sin ekonomifunktion. Användandet av Business Process Outsourcing har ökat bland de svenska företagen under de senaste åren. Det finns mångtydiga förklaringar till denna framväxt, där en förklaring är att det är en trend.

Aim: The aim of the study was to examine the effects of ?Rehabilitation with psychotherapy and yoga in group? with cancer patients, regarding physical, social, emotional and functional wellbeing. The participants? health and satisfaction with the project were also evaluated. Method: The evaluation was made with quantitative method and descriptive, longitudinal design.

Syftet med denna kvalitativa undersökning är att jag vill beskriva och analysera homosexuellas komma-ut-processer. Datainsamlingsmetoden som använts är intervjucitat med kvinnor från den skrivna litteraturen, Lesbisk identitet, Dubbelliv och Komma ut, samt livsvärldsbaserade temaintervjuer med tre av mina vänner. I intervjuerna har jag utgått från dessa olika teman; upptäckt, resans gång och dagsläge. Jag har även med ett par citat från egna erfarenheter.Mina teorier jag har använt mig av är, Fuchs Ebaughs Exitprocess, Pennebakers begrepp Disclosure och Inhibtion, jag har även använt mig av interaktion, roll- och stigma inom socialpsykologi. Jag kommer att göra ett försök till att beskriva och analysera dessa områden inom mitt ämne; komma-ut-process i sin helhet, Vad är det som påverkar kvinnornas agerande i en komma-ut-process och hur personer i det sociala nätverket involveras i en komma-ut-process.

This essay is a case-study of a phenomenon called ?ostalgie? which could be described as GDR-nostalgia. ?Ostalgie? is a compound of the two German words ?ost? (east) and ?Nostalgie? (nostalgia.) It is, like a similar phenomenon referred to as ?communist nostalgia?, a type of nostalgia. However, if one were to define ?ostalgie? as ?communist nostalgia? important aspects of the phenomenon would be left out.

The project was based on a request to improve an already existing program and hardware at the electrical engineering department at the royal institute of technology. For maximum ease of use, tests have been done on students to properly design the program for what it is meant to be used for. These tests have been transcribed and analysed, then brought back to the group in a discussion and then transcribed and analysed again, I call this process the ?four step process? (this process is presented and explained in chapter 6.4.). A part of this master thesis was also to analyse the four step process to enhance validity of this research.The project resulted in a new program with a new graphical view and features to help students and researchers to work with the technical tool for electromagnetic readings of planar objects.

This master thesis project will describe and evaluate the interfaces between applications and Controller Area Network, CAN, interface boards from different manufacturers. The interfaces have corresponding functions but the usage of parameters is different. The simply communication of sending and receiving messages is more alike than the supplementary functions between the different interfaces. The CAN communication is more controlled by the CAN protocol and is therefore more alike. The evaluation shows differences and similarities between different interfaces and also difficulties and options to translate them.

In this project a washing station has been constructed for Albany International AB. At present, there is no existing system to clean the dirty pipes that are coming back to the company.The work followed the product development process, and it started with the requirements list. This was followed by brainstorming, evaluation and completion.The result was a concept for de present time and one concept for the future.The present concept is intended to be built immediately. This is an adjustable bench with sliding bearings to facilitate the work. The actual cleaning is done with a high pressure washer that uses hot water.

Bactiguard is a Swedish company within the field of medichal technology. The company has been very prosperous since it was founded in 2005 and was electedÅrets MedTechföretag 2008 ?MedTech Company of the year 2008. According to a definition by NUTEK, Bactiguard is still considered a minor company ? despite high market value and international expansion.

For several years has there been a leading line from the government and the municipalities in Sweden to invest in schools and school grounds. The outdoor environment of schools has been rediscovered and given a greater importance. Investments have been made both practically with reconstruction and in a research context. Although, my work started with an assumption that these investments were mainly made at primary schools, and that secondary schools were set aside. The thesis This is my schoolyard.

Title: The appraiser?s choice of valuation method ? factors that influences the choice of company valuation methodsSeminar date: 04/06/07Course: Master thesis in Business Administration, 10 Swedish credits.Authors: Anne Benedicks and Veronica ÖbergAdvisor: Eron OxingProfession of category: Financial analysts, auditors and company lawyers.Key words: Company valuation, valuation methods, cash flow analysis, comparative valuation, the net asset value method.The Main Issue: What is of decisive importance when choosing a special company valuation method?Purpose: The purpose of this paper is to identify, analyse and evaluate the most common methods of valuation for financial analysts, auditors and company lawyers and those factors that influences the choice of method.Method: A multiple survey has been implemented for the actual profession categories. Primary data was collected through semi-structured interviews and a questionnaire survey.Theoretical: The theoretical frame of reference is based upon the paper?s dependent variable, i.e. the role of the appraiser.

Altmetrics, a subfield of informetrics, is still in development. The aim of this thesis is to explore; the significance altmetrics may have in the LIS field, and to define the new perspectives altmetrics offer in comparison to traditional metrics. The research questions are:- How can altmetrics affect research assessment?- How does altmetrics position itself towards traditional metrics?- How could altmetrics influence the LIS field?A qualitative content analysis was used as a method. The analysis of a sample of ten peer reviewed articles was based on a coding scheme with eleven codes.

This is a report that goes through the design process of designing and illustrating a virtual clothing shop with the theme ?Stockholm Streetstyle? for the website ?Stardoll.com?. The purpose of the report is to examine how you can manage to get as close to designing a certain style or theme as possible, and also how the process of designing a clothing line can work, The illustrations were made in Adobe Illustrator and the final result of the project was an illustrated fashion collection with 21 parts, in the total of 6 outfits, and also a background for the shop. .