Producing a building is a long and complex process. It consists of several parts, from the feasibility study and design stage onto the construction and finally the management of the building. The design process is a critical part of the process where construction plans are made. The quality of the plans affect the production phase in great extent and faulty plans can pose a risk for extra costs for all parts in the process. The cost of producing dwellings has increased the last years and the detail design process is one of many phases where improvements can mean cost savings within the whole building process.This report aims to point at parts within the detail design process which could be more efficient, regarding communication, follow-up and time planning, and to give suggestions for improvements.

???Information Technology is an essential part of the society today, not least in large ???organisations dealing with sensitive information. An example of such an organisation is the Swedish Armed Forces which indeed is in the need of ways to ensure information security in their Information Technology systems. The means which is used is an authorisation and accreditation process.All Information Technology systems go through a life cycle which includes realisation, usage, development and liquidation. In the Swedish Armed Forces the lifecycle is an authorisation process.

Every plan and program decided on by an authority or municipality, where the environmental impact can be considerable, must be environmentally assessed according to Environmental Code, the Planning and Building Act (PBA) and the Regulation on Environmental Impact Assessment.The purpose of this study is to examine the Environmental Impact Assessment (EIA) for The Region Development Plan for the Stockholm Region, RUFS 2010. The plan was approved by at that time the Regional Planning Office (Regionplanekontoret), which procured the process by consultants. RUFS 2010 includes two merged plans ie. a regional Development Plan (RUP) and the Regional Spatial Plan for Stockholm. It was necessary to establish an environmental assessment of RUP, but not for the regional plan.

Virtual Design and Construction (VDC) is the definition for using BIM in the construction process to simulate and analyse the building. Resulting use of the technology will according to proponents lead to fewer construction errors, a better understanding between stakeholders for the construction project, less communication problems and a smoother construction process. Although BIM has according to researchers a big potential, few companies have succeeded in broad and continues implementation. The study aims to identify the factors affecting the implementation. More precisely identify what factors influencing the decision to adopt VDC and potential barriers in the diffusion process. The empirical findings are based on a case study of NCC Construction Sweden.

Utvecklingen inom IT-området har under de senaste åren varit explosionsartad. Allt fler branscher har börjat att leta efter nya sätt att tillämpa de olika framsteg som skett inom områdetDetta arbete behandlar en kombinerad litteraturstudie och intervjuundersökning kring objektorientering och Business Process Reengineering. Problemställningen för detta arbete har varit:- På vilka sätt kan objektorientering tillämpas för att utveckla de synsätt och de metoder som används inom Business Process ReengineeringSyftet med arbetet var att hitta ett antal generella tillämpningsområden utifrån problemställningen, samt att hitta ett antal fördelar, som dessa generella tillämpningar skulle kunna medföra.Resultatet av detta arbete visar att det finns områden inom Business Process Reengineering, där en objektorienterad tillämpning skulle kunna medför stora fördelar. Som exempel på detta kan nämnas förbättrade möjligheter att skapa och anpassa de informationssystem som skall stötta verksamhetsprocesserna. Även möjligheterna att skapa dynamiska metoder, där varje metodsteg utgörs av färdiga moduler som sedan kombineras, bör nämnas som en fördel..

Sitka spruce (Picea sitchensis) is not considered to be a native species to Swedish forests. It´s origin is the pacific coast of Northern America, an area that is dominated by a coastal climate which makes it likely to believe that it would be well suited for growing in the south-west of Sweden. This study aims to investigate the gain in production that can be reached by growing sitka spruce instead of Norway spruce (Picea abies) in the county of Halland. A regression model based on data from forest experiments was produced to explain the gain in production. This model was based on elevation and annual precipitation. The model was then used to create a map layer in arcGIS that shows the gain of volume in comparison to Norway spruce in percent. An analysis was carried out to find what share of the forestland in Halland county that fell into four different classes of production gain.

When constructing a new house many questions appear, from architecture to decisions regarding installations. Sweden is situated in a cold part of the planet and questions regarding which heating system to install face everyone who decides to build a new house. This thesis describes a construction solution of a villa in Kiruna. The extended essay analyzes which heating system is most suitable for the construction. The options are geothermal, district and pellet heating systems.

This thesis provides a good introduction to the American environmental certification system LEED, Leadership in Energy and Environmental Design, and trough compar-isons between Sweden and the United States an explanation to the systems design is given. The work is closely linked to a LEED Core & Shell project in Stockholm, Swe-den, where the goal is to reach the second highest rating in LEED - Gold.This thesis gives a broad description of the LEED system and a more profound study of the energy sector, Energy and Atmosphere. Here, for example, an analysis has been made of how the energy consumption of an imaginary building designed according to the requirements of the BBR (Swedish building code) performs in comparison to the Baseline building in LEED.The existing model of Borgarfjord 3, which served as a case study in this work, has al-so been modified to investigate the energy savings that could have been achieved by adding extra insulation to the building. A description of the problems, regarding how the Swedish district heating system (DES) is treated in LEED, is given as well as the suggested modifications. This is an issue that will be pursued during the process of shaping a new, international, version of LEED due to be launched 2012..

Abstract The purpose of this essay is to find difficulties and risks in the re-engineering process when restructuring to Model-View-Controller (MVC). A thoroughly theory study has been conducted to be able to understand the important steps in the re-engineering process. The methods and concepts of this essay are re-engineering, UML, system development life cycle, design patterns and MVC. The science approach used is design science where the artifact being developed are a set of models.In the analysis phase of the process the system is analyzed. The result of the analysis is notes of difficulties found and models showing the structure of the system.

The automotive industry is a highly competitive market characterised by low profit margins or huge losses. Cost reductions have been of top priority for all OEM?s (Original Equipment Manufacturer) and will continue to be so for many years to come. Beside cost reductions, reducing the time-to-market is of greatest importance to stay in the competition. OEM?s that are slow to market with products that neither matches customer expectations nor the products of their competitors, will soon loose market shares and see their economical performance falter.

This study is a part of a larger project where the aim has been to evaluate different methods to assure the quality in stallion semen, due to the fact that some stallions in horse breeding have poor semen quality. The increased use of transport semen requires new methods to ensure good semen quality. In this part of the project the viability and concentration in fresh and cooled semen was examined with NucleoCounter SP-100. A comparison between two different commercially available semen extenders, Kenney?s and INRA 96, was made.

Purpose: To investigate whether or not the credit granters believe the quality in audits will deteriorate after the abolishment of statutory audit and, if that is the case, how the abolishment will strike the purpose and goal of accounting.Approach: To answer our purpose we carried out a literature study to later implement interviews with four granters of credits specialised in business accounts.Findings: The process of credit granting will not change after the abolishment of statutory audit for companies still using audit reports. Though, for other companies the process will change dramatically since the lean time of the process will increase. Higher demands will be put on these companies since the reliability in the economic information will decrease when it is no longer being reviewed in the same sense. Though, the credit granters believe that some form of substitute for audit will be demanded in order for the companies to be granted credits from the bank..

The subject of this bachelor thesis is discrimination and unfair treatment in the employment process where employers discriminate against job applicants. The purpose of this study and research questions is to investigate and clarify the legal protection available against discrimination and unfair treatment of pregnant women and persons on parental leave during the employment process and how this protection differs between men and women. This thesis highlights the Swedish law and EU law regarding discrimination and unfair treatment of individuals. The concept of discrimination and its requisites will be accounted for and exemplified by case law. This statement will be analyzed along with the relevant case law of the EU-court and the Labor-court.

To integrate environmental concerns into non-environmental policy making has become an important policy objective within the European Union. This essay investigates policy instruments in use to achieve environmental policy integration in the EU's transport sector respectively fisheries sector. The point of departure is a theoretical discussion about governance and the use of different policy instruments for environmental management at the EU-level. The focal point is the argumentation that regulatory policy instruments alone cannot achieve environmental policy integration satisfactory. By using Jordan et al's classification of so called "new" environmental policy instruments (market-based instruments, voluntary agreements and ecolabels) as complements to regulatory measures, the essay investigates whether the first-mentioned are used within the two sectors.

Background: Many different parties in the society are affected by the financial information delivered by the companies. Therefore, different interests want their ideas to have an impact on the accountning standards. The construction of the accounting standards are illustrated as a pure political process, where lobbying and conflicts of interest are determining factors. Purpose: The purpose is to understand the underlying interests behind regulation of financial accounting in Sweden and how these interests are manifestated in the establishment of accounting standards. Method: The thesis is designed as a casestudy of the regulation process which induced the legislation of the Årsredovisningslagen 6 kap 1 § 3st.