The purpose of this study is from a case study develop a model that aims to cost effectively improve productivity in a manufacturing production process. The study highlights the importance of having knowledge about customer needs and using a holistic process perspective when improving productivity to identify the relations between the process stations and by this find problems that cause waste and losses in productivity. Tools and methods used to make production more efficient such as single minute exchange of die, spaghetti diagram, 5s and master production schedule is presented an applied in the model to see how these effect costs, productivity etc.Maintenance effects on quality and productivity in a manufacturing company will as well be covered in this thesis. The results and conclusions finally reveals how the process improvement tools, maintenance and production planning for example effects each other and why it is important to establish an attitude in the company where continuous process improvement should be emphasized..

Valmets own foundry in Karlstad has during a long period of time had problems being profitable. The goal today is to turn this around. Today there are three different productionlines; engine blocks, Yankeecylinders and components for the wind turbine industry. This master thesis has focused on examining if value stream mapping is a useful tool to use in a foundry, and therefore outside the typical manufacturing industry. The target has also been to evaluate if there is a possibility to improve the flow in the foundry and also the results.During the 20 weeks this work has been done at the foundry data has been collected and analyzed.

Purpose: The purpose of this study is to investigate the innovation process of companies, and to analyse how important success factors and obstacles are in their innovation process.Method: The investigation strategy used for this essay was to interview companies that work with innovations. The essay has a qualitative approach. Both primary ? in the form of interviews - and secondary data ? literature found in books, scientific articles and internet - have been used to achieve our results.Results: The result of this essay is: there is not just one inovation process that is applicable to all companies. On the other hand, there are some guidelines that could be followed in the process.

The aim of this study was to investigate how the position of the preschool teacher could come across in interviews with six teachers about their assignment to document and evaluate the preschool activity. The research done so far in this area shows that it can be a complex and difficult part of the preschool teachers work. A dilemma often described is how the teachers can be able to analyze and document the children´s learning with the aim to evaluate and develop the preschool activity without judging and mapping the children. A special focus of the study was to see how the methods and dsicourses described by the teachers possibly could affect the teachers´s position in the area of documentation and evaluation. To analyze the empirical data Ernesto Laclau (1935-2014) & Chantal Mouffe´s discourse theory was used, a prespective witch also figured to be the theoretical foundation of the master thesis.

People are given better opportunities to participate in polity today. Democratic equality entails that all individuals are equal and therefore they should be included in the process of making the decisions. How can participation be defined and does it mean that having the possibility to participate means that people can influence the process of making the decisions in polity process?This paper focuses on participation and influence in polity and examine the relationship between having the possibility to participate and having the possibility to actually influence polity process on more local level. Therefore I have been examining the citizens? participation and influence in Helsingborg which is my case study.

This essay addresses the subject social interaction in the social network named Facebook. The studied interaction took place between the Swedish clothing company H&M and the active visitors on the company page in the social network. The subject of social interaction in social media is an interesting field to study due to its vast range, the largely amount of people involved and it is of interest to see how the company and customers interact. The purpose of the essay was to study the interaction between the company and visitors. The statement of the problem is divided into four questions which is processing a deeper analysis of how the company page is used.

Habitat selection of migratory brown trout at the upper reaches of River Vindelälven, wasstudied in September during the pre-spawning period. The fish migrate from down- orupriver lakes for spawning in the river and data was collected by habitat mapping andradio-telemetry. Habitat selection of fish was analysed with preference curves andstatistical modelling, using the physical variables; depth, stream velocity and streambedsubstrate. Preference curves were derived by comparing fish habitat use with their nearbyavailable environment while the statistical modelling aimed to answer three main questions.1) Do the trout have a specific preference of depth, water velocity and streambed substrate?2) Is there any difference in habitat selection between sexes? 3) Is there a shift in habitatselection over time? The preference curves indicated that trout favored water depths of 1-2m, velocity compositions characterized as glides (c.

Opcon Powerbox is a product developed by Opcon together with the underlying company SRM (Svenska Rotor Maskiner) where surplus heat from the industry is used through an Organic Rankine Cycle (ORC)?process to produce electricity. An ORC-process is a thermodynamic circle process in which a refrigerant is used as the working fluid. The refrigerant makes it possible for the circle process to operate at lower temperatures than the conventional Rankine process.In this master?s thesis a data analysis software for the Opcon Powerbox has been developed in which measurement data is retrieved and handled from the Opcon Powerbox.

A future expansion of wind power in the Nordic power system makes the balancing for the transmission system operator Svenska Kraftnät (SvK) more complicated. Up to the hour of delivery the balance responsible parties? (BRP) makes prognoses and plans, for consumption and production, to help maintain the balance in the electrical grid. How well this is accomplished is affected by the setup of the market design. Therefore SvK has proposed the following possible changes in market design: Increase the imbalance costsIntensify the regulation of imbalancesIncrease the temporal resolution on the different marketsPresent the prices for balancing power in real-timeModify the balancing market to simplify auction of consumption bidsA mapping over the BRPs? processes within planning and trading on the day-ahead, intra-day, and the balancing market has been performed in this thesis.

The current thesis is on the rule of law and how the principles of the rule of law are met in thenew Swedish migration process. The migration process has been subjected to criticism duringseveral years and on different occasions. The migrations process is viewed through a ?rightsof the child? perspective, foremost to seek if the rights of the child are met. The children are avulnerable group, not the least in the process of migration.

?A designer rarely works alone?. The first sentence of Jonas Löwgren and Erik Stolterman's chapter on design as a social process made me curious. What if a designer worked alone? What are the actual differences between working on a project alone and as part of a group? How would it influence the creative process? What would be different when coming up with ideas, meeting with clients and setting deadlines? Does the influence of another designer stifle the individual creativity or does it actually nurish it? This paper is written to answer these and other questions as well as take you through the creative process of the production of ?Daddy? - the music video..

Syftet med studien är att få en förståelse för hur utrustningseffektiviteten kan mätas i ett producerande företag. Vår studie utförs på ett företag i Alvesta som heter Gnutti Powertrain AB som bland annat tillverkar precisionskomponenter till motorer.Genom att vi skapar en analysmodell utifrån studerade teorier beskrivs ett systematiskt tillvägagångssätt som slutligen ska leda till att syftet uppnås. Utifrån analysmodellen studeras och beskrivs först Gnutti Powertrain AB´s nuvarande tillvägagångssätt för att sedan jämföras och analyseras gentemot de studerade teorierna. Med hjälp av analysmodellen struktureras också vår studie på företaget och vårt utförande och resultat utifrån detta kommer sedan att presenteras.Analysmodellen nämner att en processkartläggning först ska göras. I processkartläggningen väljs först en specifik process ut, vilken i vårt fall blev produktionsprocessen för en rulle av stål.

Title: The process of gentrification ?the transformation of declined neighbourhoods into attractive ones Gentrification = ?A social process of change where people with high socioeconomic status move into neighbourhoods which traditionally has been dominated by people from the lower classes or from ethnical minorities.? (Nationalencyklopedin 2010).In many cities around the world, disinvested neighbourhoods become the place to be, where everything happens. This usually occurs when different social groups, such as bohemians, homosexuals and artists, move into a declined and disinvested neighbourhood. After a while, people from the middleclass move in to the area due to its increased attractiveness, and start to renovate their properties. This usually leads to higher rents, which force some of the original inhabitants to leave the neighbourhood.

Risk management has become a key ingredient for businesses all over the world. High Reliability Organizations (HRO) has distinguished themselves as experts in this area. By continuously focusing on improving their ability to manage risks they?ve been able to successfully avoid catastrophes in environments where normal accidents can be expected due to complexity and risk factors.The aim of the thesis is to improve the risk management at Apotekens Service by applying theories from HRO and safety culture. In July 2009, following the re-regulation of the Swedish pharmacy market, Apotekens Service AB was appointed national pharmacy infrastructure supplier for the Swedish health care system.

An Interoperable Fare Management system for public transport has been a struggle for the actors in industry of public transport. A lot of effort has been put into creating a smart card solution that enables the travellers to use the same card for paying and holding the ticket regardless geographical position in Sweden. That project has failed, mostly due to a lack of taking non-technical actors and aspects into consideration during the project process. This thesis highlights the major actors and their responsibilities. The ARKTRANS framework is used as analytical tool to identify different roles. Throughout the thesis a sociotechnical perspective is used. The developed method in this thesis is suitable for mapping of actors and responsibilities in a network surrounding a complex technical system.