Producing a building is a long and complex process. It consists of several parts, from the feasibility study and design stage onto the construction and finally the management of the building. The design process is a critical part of the process where construction plans are made. The quality of the plans affect the production phase in great extent and faulty plans can pose a risk for extra costs for all parts in the process. The cost of producing dwellings has increased the last years and the detail design process is one of many phases where improvements can mean cost savings within the whole building process.This report aims to point at parts within the detail design process which could be more efficient, regarding communication, follow-up and time planning, and to give suggestions for improvements.

The  construction  industry  is  a  costly  business  such  in  respect  of  capital  for  most construction defects which then require rework, tear down and rebuild again. This study is  meaningful  awareness  of  tools  that  can  reduce  this  best  through  communication  and information sharing between the parties.  The  construction  industry  is  known  as  temporary  projects  organizations,  where  the construction  project  consists  of  several  actors  who  have  to  communicate  and  share information  between  them  to  avoid  mistakes  later  in  the  build  time.  These  actors  are bounded together thus for the duration of the project, then broken when the project has reached its end. The challenge here is for these actors to apply a tool that can help and simplify communications, information sharing, and perhaps the most important aspect is to  create  a  routine  for  the  association  and  the  shattering  of  these  actors.  To  implement such  behavior  using  a  tool  such  as  BIM  in  the  industry  whose  size  perhaps  is indescribable may be a very hard task.  BIM (Building Information Model) could be seen as the solution to this problem because it  acts  as  a  portal  where  the  actors  involved  must  sign  in  and  communicate,  share information, and eventually create a behavior, a routine for this association and division of  the  actors  following  the  end  of  the  project.  The  technology  could  help  the  involved from  the  beginning  of  the  project,  already  in  the  model  stage,  break  down  and  prevent any construction barriers when the building has been placed in the works.

???Information Technology is an essential part of the society today, not least in large ???organisations dealing with sensitive information. An example of such an organisation is the Swedish Armed Forces which indeed is in the need of ways to ensure information security in their Information Technology systems. The means which is used is an authorisation and accreditation process.All Information Technology systems go through a life cycle which includes realisation, usage, development and liquidation. In the Swedish Armed Forces the lifecycle is an authorisation process.

Swedish sawmills of today suffer from unsatisfying economy with high costs and low benefits. The economical result depends on how well the sawmill can use their raw material. Iggesund Timber AB, a sawmill in the Holmen group, produces a large amount is enduse orientated products for the woodworking industry. Therefore the aim of this student thesis was to investigate the possibility of automatic enduse orientated quality grading of Scots Pine (Pinus sylvestris) saw logs by using a gamma-ray log scanner. Iggesund Timber AB has the possibility to grade logs automatically with TINA, a two way gamma-ray log scanner. Grading and classification of Scots Pine logs in Sweden today are mainly manual but can in some rare cases be automatic.

Every plan and program decided on by an authority or municipality, where the environmental impact can be considerable, must be environmentally assessed according to Environmental Code, the Planning and Building Act (PBA) and the Regulation on Environmental Impact Assessment.The purpose of this study is to examine the Environmental Impact Assessment (EIA) for The Region Development Plan for the Stockholm Region, RUFS 2010. The plan was approved by at that time the Regional Planning Office (Regionplanekontoret), which procured the process by consultants. RUFS 2010 includes two merged plans ie. a regional Development Plan (RUP) and the Regional Spatial Plan for Stockholm. It was necessary to establish an environmental assessment of RUP, but not for the regional plan.

Sapa Heat Transfer is a company that produces aluminum heat-exchanger strips for the automotive industry. Sapa Heat Transfer wish to chart their emissions of carbon dioxide in order to meet future demands on carbon dioxide reporting. They also would like to examine the meaning of the term ?green electricity? which is marketed as carbon dioxide free, and the sort of electricity that they purchase. This report includes both direct (liquefied petroleum gas and diesel) and indirect (water, process-water, long distance heating, waste) emissions from their company.

Today, maintenance is a big part of the daily life on board ships. It is also one of the bigger expenses a shipping company has and without any loss of quality tries to run as economically advantageous as possible. In the hunt for economical savings the shore-based industry has subsequently applied the use of condition based maintenance, CBM, were a component is maintained according to its actual state. This leads to a reduction of maintenance costs since no parts are unnecessarily replaced. However, within the maritime sector a periodical maintenance is still the most commonly used maintenance system.The purpose of this paper is to chart the factors that are the reason for the low implementation of CBM on board the Swedish merchant fleet's ships.

The construction industry works today with a time limit, therefore it is important to have rational tools to improve the efficiency in the building process. That?s the reason for this report, where a standard for interior finishes has been developed for Sandvik. The standard for interior finishes is designed as a program for room functions and includes office space and sanitary areas. It is a proposal showing how Sandvik can design their premises in the future.

The purpose of this study is to investigate how the major swedish banks look upon and promote student profitability as well as long-term relationships within the student segment from a CRM point of view. The study incorporates a qualitative course of action with an abductive research approach which has been carried out by conducting personal and telephone interviews with representatives from three out of the four major swedish banks Nordea, Swedbank and Handelsbanken. Our research finds that the banks appear to regard their relationships with students as long-term investments, but that they simultaneously seem to lack distinctive, clear and procreative strategies for securing these relationships. Furthermore, the development of profitability within the student segment is considered an informal process that does not necessarily need to be computed through the use of quantitative estimates. Also, educational variables does not influence the banks as they segment their customer base and the student-centred offerings within the banking industry is to be deemed as being standardized rather than differentiated..

The tourism industry in Sweden has expanded in recent years and the increasing industry has meant that customers are in need of a reseller for their trips abroad. Today there are three types of retailers available. These are : Traditional travel agencies , tour operators and online travel agencies.Online Travel agencies are the most modern online option for customers. Their existence has made it easier for the customer and reservation can be made anytime and anywhere. The competition has intensified between the three retailers and the traditional alternatives must find new ways to survive.

Virtual Design and Construction (VDC) is the definition for using BIM in the construction process to simulate and analyse the building. Resulting use of the technology will according to proponents lead to fewer construction errors, a better understanding between stakeholders for the construction project, less communication problems and a smoother construction process. Although BIM has according to researchers a big potential, few companies have succeeded in broad and continues implementation. The study aims to identify the factors affecting the implementation. More precisely identify what factors influencing the decision to adopt VDC and potential barriers in the diffusion process. The empirical findings are based on a case study of NCC Construction Sweden.

Lately, more and more music festivals have emerged in Sweden. People?s desire and need to visit these events only seems to increase. Cultural tourism and music tourism has developed into a significant and important part of the experience industry and it employs more and more people within the tourism industry. The purpose of this paper is to investigate which effects this can have on the local community.

Utvecklingen inom IT-området har under de senaste åren varit explosionsartad. Allt fler branscher har börjat att leta efter nya sätt att tillämpa de olika framsteg som skett inom områdetDetta arbete behandlar en kombinerad litteraturstudie och intervjuundersökning kring objektorientering och Business Process Reengineering. Problemställningen för detta arbete har varit:- På vilka sätt kan objektorientering tillämpas för att utveckla de synsätt och de metoder som används inom Business Process ReengineeringSyftet med arbetet var att hitta ett antal generella tillämpningsområden utifrån problemställningen, samt att hitta ett antal fördelar, som dessa generella tillämpningar skulle kunna medföra.Resultatet av detta arbete visar att det finns områden inom Business Process Reengineering, där en objektorienterad tillämpning skulle kunna medför stora fördelar. Som exempel på detta kan nämnas förbättrade möjligheter att skapa och anpassa de informationssystem som skall stötta verksamhetsprocesserna. Även möjligheterna att skapa dynamiska metoder, där varje metodsteg utgörs av färdiga moduler som sedan kombineras, bör nämnas som en fördel..

Abstract The purpose of this essay is to find difficulties and risks in the re-engineering process when restructuring to Model-View-Controller (MVC). A thoroughly theory study has been conducted to be able to understand the important steps in the re-engineering process. The methods and concepts of this essay are re-engineering, UML, system development life cycle, design patterns and MVC. The science approach used is design science where the artifact being developed are a set of models.In the analysis phase of the process the system is analyzed. The result of the analysis is notes of difficulties found and models showing the structure of the system.

Tourism is often being viewed as one of the worlds largest sectors and a great contribution to growth and development. There is a large motivation amongst developing countries to promote themselves as a tourist destination, since they expect the tourism to generate economic growth. The government of Thailand has been promoting tourism since 1960, and the number of foreign visitors has increased from 100 000 back then to 13.5 million in 2006. The purpose of this paper was to investigate weather the increasing tourism industry in Thailand has pulled resources away from other sectors of the economy towards the tourism sector, and in that way harming Thailand?s international competitiveness and causing deindustrialization.