This degree project has been carried out in cooperation with Enertech AB in Ljungby and is pilot study to automating all current manual soldering. The soldering process accounts for a large part of the processing cost in the production of a heat pump. The process is also a quality risk and has a major impact on the lifetime of the final product.The Main task of this project has been to evaluate automation of the soldering process, to develop automation solutions and a principle layout, to draw the design changes required for the automation and to calculate the supposed solution.This pilot study has resulted in a suggested automation solution using laser as a heat source for soldering. Calculations of the solution show that a automating a laser soldering cell is very profitable..

The swedish national board of housing, Building and Planning,recommends that all stakeholders in the construction industryperform a moisture control design to make sure that the buildingachieves good moisture resistance. Since June 1, 2006 there are nospecific requirements or quantitative values for air leakage.Although the swedish national board of housing does presentrequirement that the building envelope must be sealed so that theclient?s requirements for specific energy consumption and installedelectric power for heating purposes are met. Despite this, studiesfrom SP shows that few buildings meet the client?s requirements inspecific energy, which increases the risk of occurrence ofcondensation-related moisture damage.This study aims to evaluate curtain walls connections from airsecurity and moisture safety.

The failure of Structural Adjustment Programs and its neoliberal policies to effectively reduce poverty have led to the creation of Poverty Reduction Strategy Paper (PRSP) by The World Bank and International Monetary Fund. PRSP, connected to both the Comprehensive Development Strategy and the HIPC initiative, are built on the notion of national ownership and stakeholder participation and thereby expand potential conditionality to include matters of governance. This thesis examines the evolution of PRSP and how the process of participation affects national governance structures. By analyzing the role of rules and norms within the World Bank and IMF from a historical point of view the thesis explains why the participation process has developed the way it has. It concludes that neoliberal norms, still at heart within the World Bank and IMF, have an impact on the process of participation within nation states and thereby its governance structure.

In today?s competitive market, design is an important element for the companies. They must succeed with delivering an increased value and an experience for the consumer to be able to survive. The Swedish company?s have become better in the design area, the higher standards the consumer?s demands forces the company to invest more in design.

Composers? and choreographers? world of ideas. Aspects of the art process. This inquiry is about the artistic process when composing contemporary music and choreographing modern dance. I have studied three composers? and three choreographers? thoughts about the artistic process and the work that leads to a piece of music or a dance.

I dagens samhälle blir det allt mer intressant att spara energi, dels med tanke på miljön och dels föratt minska på utgifterna. Denna energi ska sparas på ett sådant sätt att effekten för användarna blirså liten som möjligt.I denna rapport beskrivs hur ett reglersystem kan byggas för att minska energiförbrukningen hosväxthus genom att reglera belysningen på ett effektivt sätt. Systemet är helt automatiskt vilket göratt användarna inte behöver tänka på styrningen av lamporna alls när väl systemet är uppsatt ochkonfigurerat.För att styra lamporna på ett bra sätt mäts det inkommande ljuset med en PAR-sensor. Lampornatänds och släcks därefter beroende på ljusmängden och även på hur varmt, eller kallt, det är iväxthusen.Styrningen av belysningen sker med en mikrokontroller från Microchip, en PIC18F4620 som ärprogrammerad i C18. Kringkomponenter som portexpasioner, klocka och reläer användes också föratt bygga ett bra reglersystem.Resultatet är att det är möjligt att bygga ett reglersystem med begränsad budget som styr lampornapå ett effektivt sätt.

The SMEs’ internationalization strategy—Foreign Market Entry Modes selection Title: 1st of June 2006 Date of the Seminar: Bus 809. Master thesis in international marketing Course: Han xiao Author: Ulf Elg, Associate professor, Lund University, Sweden Advisors: Ying Bin, Associate professor, Zhongnan University of Economics and Law, China. Guest researcher, Lund University, Sweden Internationalization, entry mode, SMEs, foreign market Keywords: The purpose of this study is to understand the internationalization process of the SMEs, and try to define the motives and internal factors impact their foreign market entry mode selection. Thesis purpose: This thesis is based on qualitative method using case study. The primary information sources are the interviews with key-persons in internationalization process of SMEs Methodology: The literature review in this study concerns areas of SMEs’ motives for internationalization, foreign market entry mode approaches and influence of internal & external factors.

The aim of my thesis is to obtain knowledge of textile wastewater and textile sludge from an environmental perspective, which can be used as a basis for the  ?Sweden Textile Water Initiative? guidelines for a sustainable sludge management. In my study I have mainly focused on textile dyes, salts and metals and their routes during wastewater treatment.This paper is partly a literature review, which I began by identifying the pollutants discharged from each textile process. Then I studied wastewater and sludge quality, environmental aspects, possible treatment and recycling methods. I have also tried to find existing type of guidelines in order to make comparisons.

Title:Product abandonment ? A comparative study of five ABB-units Level:Master thesis in Business administration, spring 2011.Purpose:The purpose of this paper is to through a comparative analysis examine how different companies, within the same group, works with product abandonment and what factors influence the process.Problem:How important is situational and product specific factors in a product abandonment process in which the organizational factors are constant?Method:This study is based on primary as well as secondary data where interviews represent the primary data. Interviews, following the same interview guide, were made with five companies within the same group.Result:The results from the empirical studies presented in the text below recurring themes derived from the framework.Conclusions:Our conclusions are that the importance of product specific factors is of significant matters in a product abandonment process, even when organizational factors are constant. We base that on that although the companies are within the same group, under the same strategic direction and constructed according to the same organizational structure the product abandonment process is different for the respective companies.Keywords:Product abandonment, product deletion, product elimination, weak products, ABB .

This is a technical report about cement stabilization in general and the stabilizationprocess during the construction of a warehouse in Halmstad, Sweden in particular and iswritten at the section for economy and technology at Halmstad University incollaboration with NCC Anläggning.NCC encountered variations in compression strength in the stabilized material on the firstwarehouse that they constructed for the company Biltema. In our report we used thestabilization process of the second warehouse for the same company as a reference todetermine what could be done to get a more homogeneous result for future projects.We also looked in to what testing method is the most suitable to determine the result ofthe stabilization.After interviews with people involved in the process and visits on the work site we havecome to the conclusion that the most probable cause to the variations in compressionstrength is segregation in the ballast material. This segregation can occur in severaldifferent occasions in the process such as during the production, transportation andhandling on the work site.Other causes for the variation can be improper compaction, overlapping stabilization insome places and different duration of hardening of the samples that are tested.The best way to do in situ test of the stabilized material is to do seismic investigations asthose are non-destructive tests in comparison to taking core samples and you can discoverany cracks or air bubbles in the material..

Our paper is based on matrixes and the feedback process as tools in the daily work in the higher education system. The main purpose with this paper is to investigate if these tools can enhance the effect of formative assessment and increase students? empowerment in the courses. In do-ing so, we investigate if students experience that their efforts result in increased progression in their courses and if they acquire adequate proficiency in the subject matters native to their pro-grams, along with an increased desire for lifelong learning. Compulsory collection of data for profit is conducted through interviews of students in year one of the IT media program and the IT program.

AbstractVäxjö University, School of Social SciencesBachelor thesisTitle: Varför en rädsla för alternativmedicin? En studie om hur EU?s kosttillskottsdirektiv har implementerats i Sverige.Author: Annica BlomstrandSupervisor: Anne Haglund-MorrisseyThe aim of this study is to investigate the process of legislation and implementation of the directive of the European Union on the food supplements, focused on member state of Sweden.There are two questions in this study: What was the process of legislation in the period when the Directive on the food supplements became established? and How does the implementation of EU?s decision on the food supplements works in reality? In order to answer these questions, two different methods were used. One was qualitative analysis of the available text and the other one case-study (qualitative including interviews)The conclusion is that the implementation has not been successful. The process of legislation has followed its traditional way, which in its turn did not leave so much space to the thorough implementation of the Directive. Unfortunately, this is a process that overlooks citizens and countries with different premises, affected by the decision.Keywords: EU, kostillskottdirektivet, lagstiftningsprocessen, implementering, organisationsteori, fallstudie.

 Level:                                 Master thesis in business administration, 15 creditsDate of seminar:                2009-05-29Title:                                  Stick to your knitting ? Outsourcing of the economic function in some small private limited companies in VästeråsAuthors:                             Johanna Eriksson 1982johanna.erik@gmail.comSandra Hansson 1982shn04005@gmail.comTutor:                                 Leif CarlssonPurpose:                             From a company perspective describe why the chosen companies in Västerås decided to either outsource or to have their economic function internally, define how the outsourcing process looks like and examine how the companies that have chosen to outsource have experienced their outsourcing situation. Further, we wish to contribute with advice for companies that are considering the option of outsourcing their economic function.Method:                             An intensive study of existing literature and a pre-study were conducted in order to create a framework for the thesis. The pre-study was conducted with one business counselor and two suppliers of economic services and resulted in local practical examples that supplemented the found literature. The main research consisted of semi-structured personal interviews among twelve companies in different sizes in Västerås.

In recent years, several scandals have been revealed where public employees been involved. Some researchers argue, moreover, that the NPM's rampage has led to an increase in the risk of corruption in public administration. The Regulation on Internal Control shall, according to the government, lead to adequate protection against corruption by analyzing and managing risks. However, Riksrevisionen have criticized the authorities' protection against corruption to be too unstructured and unsystematic. In addition, they questioned whether the regulation really has significance in the work against corruption.

The Motor Group of the European Council was commissioned in the autumn of 1997 to prepare a proposal for a new European Bus and Coach Directive. In the beginning, most of the Member States did not have the accessibility requirements as their main concern; still a smaller network with actors from the National delegations from Britain, Germany and Sweden would influence the other National delegations in the Council group to finally agree to retain the requirement of accessibility of the Directive. Within the EU decision process, the European Disability movement acted as a strong player during the whole negotiation process using the proposal to a new Bus and Coach Directive as a tool to influence key actors to go towards a Directive with a strong approach for accessibility.Policy Transfer and Policy Transfer Network are used as analytical tools to understand and structure the transfer of the question of accessibility during the negotiation process. Actors understanding how the bureaucratic process works within the EU decision system have a chance to contributing for the changes in the directions they wishes for within a range of policy areas. The principal aim of the Directive was to guarantee the safety of passengers and to provide technical prescription in particular to wheelchair users.