Fotledsdistorsion är bland den vanligast förekommande skadan inom idrotten, där symtom som smärta, svullnad och funktionell instabilitet oftast blir en följd av skadan. Beroende på hur allvarlig skadan är kan det innebära långa tidsperioder ifrån idrotten. Det finns olika rehabiliteringsmetoder efter fotledsdistorsion där oftast PRICE ingår. Syftet med studien var att granska den vetenskapliga litteraturen avseende effekterna av rehabiliteringen efter akut eller subakut fotledsdistorsion. Metod: En litteratursökning genomfördes i databaserna Academic Search Elite, CINAHL, PEDro och Pubmed, vilket resulterade i att 25 artiklar inkluderades.

Today produces the wind power 2,5 TWh (TWh = terawatt hours) of Sweden?s total energy input of around 620 TWh. The Parliament has adopted a national planning objective where the wind-based electricity production will increase to 30 TWh in 2020. This requires that landowners will leas there land for wind power to wind energy companies. Such land leasing means that the landowner's business is considered to be a multiple-use.

To manage the industry?s need of wood assortments in a optimal and cost effective way the forest companies need to have knowledge of the actual standing volume and the yield of the planned clear cuts. The mean volume of the trunk is also important since it is important for the contractors prices. Today the total volume are estimated either with Näslund (1940) or Brandels (1990) functions of volumes, and the yield is estimated with Rune Ollas (1980) function for trunks and stands. The purpose of this study has been to answer the following questions: How good is the yield forecast with data collected with currently used methods? How well can the yield forecasts became with data collected according to the instructions? How well can the yield forecast be with data collected according to the instruction and calculated with the program Aptan for theoretical bucking? The study has been initiated and financed by SCA Skog AB.The material consisted of a number of randomly selected objects ready for clear cut.

It is found that the properties of the record years of 1965-1975 is leaking a lot of energy andthese properties are facing a major energy efficiency. From the energy aspect, the facade isafflicted with poor thermal insulation which is a big problem. To address this problem addinginsulation is a good alternative to reduce overall energy consumption of a building. Thewindows on these buildings are also a problem from the energy point of view. Therefore,there are many reasons considered for energy upgrading.

A debate in finance is whether a random investment gives the same return as carefully choose and valuing an amount of shares to invest in. Stock valuating Stock valuation is often done by fundamental valuation models, based on the company's underlying character, which tries to put a correct price on the stock. Today there are several different valuation models that can be used for this purpose. Since valuation models are only mathematical, equity research is underpinned by more subjective assessments about the company and its future.The purpose with this thesis is to describe which valuation models that are used by professional stock analysts, but also to see if the reliability on the equity research is affected by the used model to valuing the company. Furthermore, we want to see if the job that?s been done to understand the company, measured by the equity research quality, impact the reliability on the equity research.In this thesis, we have, to achieve our purpose, conducted a quantitative content analysis of 164 equity research done by professional analysts at firms listed on the Stockholm Stock Exchange. With basis in previous research, we have developed a method for determining the valuation model that is used in the equity research, the reliability on the equity research and a framework for assessing the quality of the equity research.In the theoretical framework the valuation models involved in our study are described, previous research on the reliability on the equity research and their practical use.

In the year of 2005 the international standard IAS 40 came in to use in Sweden, this lead to an opportunity for the corporations to choose either to evaluate their investment properties according to the historical cost accounting principal. The model contains the obtaining price with reduction for the planned writing off. The alternative that IAS40 offers is the fairvalue principal, which evaluate the investment properties by consideration of the income versus outcome and surrounding factors for every accounting periodSince the fairvalue is buildt on numbers the corporations them self choose what to publish and for how long the value depreciation should be lasting before it should be taken up as an unrealized value change in the reporting material. This means that there is a big chance that the evaluation can be distortedSince we just recently have had strong cyclical variation and are on our way from an excess boom into a weak economic climate, this will be the first study performed about fair value in a weak economic climate since the adoption of IAS40.The purpose of the essay is to find out how well the booked value of investment properties owned by corporations listed on the Swedish stock market accord with the fairvalue that the market and the Swedish property index indicates on. To be able to test this connection we gathered information from the corporation?s annual reports which we compiled to see how the market comprehends.

Ocean Thermal Energy Conversion, OTEC, a technology using the temperature difference between cold deep seawater and warm surface water, can extract the work in the form of electricity. OTEC gives also synergies of drinkable fresh water. The temperature difference has an impact on the efficiency of the technology, which means that the feasibility of OTEC is geographically limited. The project intends to explore the possibility of replacing the atoll Tarawa?s present electricity generation with an OTEC plant and to explore synergies. In the present situation all of Tarawa?s electricity is generated by fossil fuels.

This bachelor essay is divided into two parts, the first being a construction of a single-familyhouse and the second an in-depth study of five different isolation materials, analysed from anenergy perspective.The first part, the construction of the single-family house, has been created from knowledgeacquired during three years of studying at KTH Royal institute of Technology in Stockholm, inthe program Architecture and the Built Environment. The constructed house is a one-floorhouse of 137m2with façade plaster, situated in Borlänge, Sweden. The house has a wooden framewhich is built on a on sight cast concrete foundation, on the ground. The house?s roof is a gableroof, which has an angle of 24 degrees.

 Date                   May 28, 2009Level                  Bachelor thesis in Business Administration/Information TechnologyAuthors             Jennie Andersson, Niklas Fridell, Visar HoxhaTutor                  Marie MörndalDepartment    HSTTitle                    ERP-solutions in small to medium sized enterprises ? possibilities and problemsSummary          ERP-solutions have penetrated the market for SME: s, offering the same advantages larger enterprises have enjoyed for years. For a significantly cheaper price, SME: s can nowadays acquire ERP-solutions and become more effective and increase their profit.  The authors have examined five SME: s in both the production and service company segment and have come to the conclusion that an ERP-solution would indeed benefit these companies in many levels but also induce certain obstacles the examined companies must overcome, both financial and organizational.Purpose            The purpose of this thesis is to examine if and how SME: s can become more efficient and developed and increase their profit by implementing an ERP-solution. Further, the purpose is to discuss which conditions that exists for the examined SME: s in order to implement an ERP-solution.Method            The thesis consists of a qualitative research where the authors have interviewed either the owner or employees at management level by using semi-structured interviews.

Bakgrund: Den heliga fastemånaden Ramadan innebär stora omställningar i cirka en och en halv miljard muslimers liv. Detta har, med bakgrund i den effektiva marknadshypotesen, föranlett flera olika undersökningar av eventuellt återkommande prisavvikelser i samband med Ramadan, en så kallad Ramadaneffekt. Tidigare studier visar dock på något motstridiga resultat vilket gör att vidare forskning inom området är motiverad. De till viss del förändrade livsvillkor som Ramadan innebär har i tidigare studier använts som förklaringsvariabler, något som dock kan ifrågasättas och undersökas vidare med utgångspunkt i Behavioral finance.Syfte: Denna studie ämnar undersöka om det existerar någon Ramadaneffekt på 17 olika muslimska aktiemarknader samt att kritiskt granska tidigare studier inom området och förklaringsvärdet i fastans fysiska och psykiska påverkan vid en eventuell Ramadaneffekt.Genomförande: Studien är av både kvalitativ och kvantitativ karaktär med huvudsaklig tyngdpunkt i statistiska analyser av studiens datamaterial. Regressionsanalys med dummyvariabler utgör den statistiska metoden och resultatet analyseras genom att applicera Behavioral finance till dokumentstudien för att försöka förklara de statistiska resultaten.Slutsats: Studien finner att endast den pakistanska aktiemarknaden uppvisar en signifikant prisavvikelse under Ramadan.

Ocean Thermal Energy Conversion, OTEC, a technology using the temperature difference between cold deep seawater and warm surface water, can extract the work in the form of electricity. OTEC gives also synergies of drinkable fresh water. The temperature difference has an impact on the efficiency of the technology, which means that the feasibility of OTEC is geographically limited. The project intends to explore the possibility of replacing the atoll Tarawa?s present electricity generation with an OTEC plant and to explore synergies. In the present situation all of Tarawa?s electricity is generated by fossil fuels.

The purpose of this paper is to examine how seams in an interactive system should be managed. Seamsin this study refer to the boundaries that arise when users move between for example differentsoftware, products or positioning systems. These seams are a cornerstone of the relatively unexploredarea called seamful design, which is based on that users can avail highlighted seams through activeparticipation in the use of a system. To analyze this area, seamful design is applied to the developmentof an interface of a smoothie vending machine. This smoothie machine thus provides the analyzedinteractive system, which the research questions are applied to as well as answered by.

It is important that organizations today focus on continuous improvements in order to face the growing competition in the world. A company needs a corporate culture that supports and encourages the employees to be creative and innovative in their work. This is necessary for the company if they are striving towards continuous learning and development within their organization.The main purpose of this paper is to investigate how the culture differences between Sweden and China affect Sandvik AB. We will also study how the company manages continuous improvements and what consequences culture differences have on their work.Our paper is a single case study at Sandvik AB in Sweden and China. We have visited Sandvik in Sandviken to conduct a series of interviews with employees of different position within the company and with dissimilar work tasks.

Background: According to many authorities Trademark consideration will within the companies become all more prioritized objectives for competitive advantage and a strong organisational structure.Trade marking is becoming an important tool, not only Production oriented companies apply this on their products or services whereas it is today spread in many different sectors.Problems: On the basis of theoretical and empirical studies, we will try to see how a trademark is built up.This will guide us to our questions at issue:? How has the actual process for HTF been in order to strengthen and to build up their trademark, how have they achieved this in practice?? What are the underlying criteria?s to for this work and what role has the consultant company BMN in the actual process?Aim: The authors have for intention to create an understanding on why there is interesting for a trade union organisation like HTF to carry out a trademark development investment. A further understanding will be to highlighting a strong trademark's advantages and possible disadvantages.Results: As a trade union organisation where the relationship to the members and the potential members is becoming all more important is the interesting to highlight their trademark clear and in addition to that contribute to building and establishing strong relationships. on the basis of this study we can state that it is now one of the most important support activities that as a trade unions to highlight its core values through trademark. As a trade union, one can to a large extent work with and to apply the market the economic mocks-up for trademark build up.The most important aspect is that we can state , in the future developed to concentrate more on communication, positioning, segmentation and diversification, which the trademark act as intermediary.

Reinforcement is of great importance to fulfill the dimensioned strength of a concrete construction. This requires that the work needs to be carried out with adequate results that neither endangers the workers or the safety of the construction. Progressive development of the planning phase, construction documents, and construction methods is in constant need since the technology constantly evolves.In order for contractors to be able to get acceptances from their quotations requires that they have to increase their working pace in order to be able to leave a quotation with a lower price than the competition.Due to the increasing pace the different parts involved in the construction process is subjected to time pressure. The design stage, construction documents, work preparation and the execution are all affected when everything has to be finished quickly. To avoid problems, it is required that all parts are able to deliver good quality solutions and results under the influences of time pressure, which is not always easy.