Lerbodaälven is a river in the municipality of Kil which, due to high phosphorus content is not meeting the requirements for good ecological status according to the Water Framework Directive. The purpose of this report is to investigate the causes for the high content of phosphorus that has been measured in Lerbodaälven between 1995-2010. Four questions will be answered in this report. 1. Does the sewage treatment work affect the phosphorus level in Lerbodaälven? The result from the time series analysis shows that the sewage treatment works have a small impact on the phosphorus level in Lerbodaälven.

This bachelor thesis in mechanical engineering was performed during the spring2015 in collaboration with Composite Consulting Group in Laholm. TheComposites Consulting Group works mainly with design and details of differentcomposite projects, their main area is FE-calculations, 3D-modelling andmechanical tests with composite materials.The aim of this bachelor thesis was to simplify the calculation process of solidmechanics for sandwich panels by simulation with computer software. The goalwas to decrease the time for the design and calculation process of the constructionand the cost of the practical tests. Our task was to build a static three dimensionalmodel with the computer software Abaqus, where the result should correspondwith the practical pressure tests in laboratory.The project started with collection of material data from Composites ConsultingGroup and by learning the software Abaqus, simultaneously a specification wasdeveloped in corporation with the company. Later on, a static wheel pressuremodel in the software Abaqus was produced which simulated the behavior of thesandwich panel during static wheel-pressure by a pallet truck.

This paper discuss the possibilities to improve the Swedish political nomination system. It brings up some of the values and norms that can be used to change the existing system. Values as openness, the demand of responsibility and also if there is values from the American spoils system that can be used in the Swedish system. A minor purpose is to discuss the part of the parliament within the nomination process. To investigate this I have some theoretical starting points and a self constructed analysis tool.

Human-computer interaction is central for computer assisted development. The aim was to investigate the user experience of a new (U2) compared to an old (U1) computer system, within a cognitive psychology frame of reference. Six subjects, frequently using the system, participated in the study. It was shown that the new (U2) compared to the old system (U1) enhanced and supported more the users? system related procedures/tasks.

Chemical stabilization of mine waste from Ljusnarsbergsfältet with sewage sludge and calcium carbonate residuesMine waste from Ljusnarsbergsfältet in Kopparberg, Sweden, is considered to constitute a great risk for human health and the surrounding environment. Some of the waste rock consists of sulphide minerals. When sulphide minerals come into contact with dissolvedoxygen and precipitation, oxidation may occur resulting in acid mine drainage (AMD) and the release of heavy metals. The purpose of this study has been to characterise the waste material and try to chemically stabilize the waste rock with a mixture of sewage sludge and calcium carbonate. The drawback of using organic matter is the risk that dissolved organic matter can act as complexing agents for heavy metals and in this way increase their mobility.

Mathematical models possible to simulate are of great importance in order to make successful projects in the aircraft manufacturing industry. An aircraft fuel system is very complex, containing pipes, tanks, orifices, valves and pumps. The principal of this thesis is using the tool Easy5, which no longer is considered reliable enough in terms of development and support. This thesis tries to evaluate the Modelica language as a possible alternative to Easy5. To make this evaluation, the components concerned in the fuel library in Easy5 are implemented to the Modelica language.

Much attention has been directed to Charity Foundations and how they use the donations given to them. Donators and external organisations put pressure on and evaluate the performance of Charity Foundations. The purpose of this thesis is to increase the understanding of how Charity Foundations handle the pressure from external parties through a qualitative case study of one Swedish Charity Foundation. The most important external factors have been identified and the accountability relationships between each party and the Charity Foundation have been examined. The empirical material was collected through semi-structured interviews and from written sources.

I was assigned to the thesis as part of a project GMA AB (Ground Machinery Applications AB) is running. The project aims to develop a new method for injection of drilled holes in rock walls. Currently, the injections usually involve cement but the basic idea of the project is to replace cement with a supplement called Silica sol.Silica sol is known as a gelling liquid. The gel time is controlled by a mixing of saline. Depending on the amount saline that gets mixed in, the gel time varies.

The municipality, of Gatukontoret in Local government of Borås has in the long run, a required need to look after the current heating devices (the gas production plant) in sewage treatment plant, called Gässlösa. The practical work of the examination is about, trying to find a better way to take care of the current heat recovery. That may be one way or another, rather easy to implement in the existent construction.Through the work to increase the efficiency of the gas engine, implement of some external cooling system by heating exchange device. That gives an opportunity to heat (primary) the digester, (but even all internal public areas) with its own superfluous heating.The report shows that if the management group may invest 422 704 crown to implement a heat exchanging device, it gives more space to reduce the need to buy expensive external energy. Gatukontoret´s pay off time, for buying machines, is 20 years, with reservation to calculate with 4 percent internal interest, leads to the yearly mount of 31103 crowns.If Gässlösa increases the gas engine time in (effective) duty approximately (correspondingly) 48 hours a month the entire investment will generate a profit in January in year seven after the implementations.

The author of this report has created a Web-based invoice system and CRM at therequest of the company Webhouse.se. The purpose of the System is to makeeveryday tasks in the company easier. The system also needed to prevent mistakesand errors by managing orders and invoices.The system has been created with the company?s requests in focus. During thedevelopment of the system information security and interaction design have beenimportant aspects that have been taken into consideration.The system has been created using techniques such as PHP and MYSQL.

Studien undersöker om återföring av näringsämnen, huvudsakligen makronäringsämnena kväve och fosfor, från humanavlopp i Norrköpings kommun kan komma att ske på ett sätt som är i linje med naturvetenskapliga kretsloppsprinciper.Frågan om återföring av näringsämnen och dess problembild är av stor vikt då dagens flöden leder till både resursslöseri och miljöproblem som övergödning. Anledningen till att näringsämnen inte recirkuleras måste bero på någon form av oförmåga hos aktörerna att ta i tu med problematiken.Studien analyserar olika aktörers perspektiv. Aktörerna beskrivs dels i ett nationellt perspektiv men den huvudsakliga fokuseringen ligger på kommunal nivå. Detta på grund av att kommuners roll inom området innebär att de är ytterst ansvariga för utformningen av avloppssystem. Aktörer som agerar i förhållande till kommunen har därför undersökts närmare genom intervjuer med olika representanter för aktörerna.

Web Services har vuxit i popularitet de senast åren. Användningen av inbyggda systemökar också ständigt, och möjligheten att göra inbyggda system tillgängliga via Web Services öppnar nya möjligheter.Detta arbete visar på möjligheter och problem med standardiserade textbaserade protokoll för kommunikation i inbyggda system med små resurser. XML-RPC och SOAP studeras ur detta perspektiv. SOAP befinns vara mer komplext att implementera stöd för än XMLRPC i den begränsade testmiljön, som har 32kB internminne. XML-RPC visar sig ge fördelar över proprietära protokoll främst när det gäller underhållbarhet och återanvändbarhet..

Vi har undersökt ett verksamhetskritiskt system i en större organisation för att se hur systemet är konstruerat och hur förvaltningsarbetet bedrivs för att undvika avbrott i systemet. Då det är särskilt viktigt att dessa system har hög tillgänglighet har vi försökt lyfta fram faktorer som visat sig vara särskilt viktiga för att uppnå hög tillgänglighet. Undersökningen har genomförts som en fallstudie där vi intervjuat personer med olika befattningar inom organisationen. Vi presenterar även ett antal rekommendationer som vi tror kan minska risken för avbrott i det undersökta systemet..

Under de senaste åren har webbplatser blivit allt mer komplexa och informationen som ska visas och hanteras allt större. För att underlätta hantering och administration av dessa system har många CMS-system vuxit fram. Dessa system kan skilja sig mycket beträffande pris och funktionalitet, allt från mindre open source system till stora komplexa kommersiellt drivna system. Detta arbete bygger på att skräddarsy ett CMS-system för administration och hantering av innehåll på diverse artist sidor, som hanteras av ett medieföretag. Systemet använder tekniker som JavaScript, PHP, MySQL som grund för dess uppbyggnad.

Examensarbete har utförts för AIAB DC Systems i Karlstad.Vår uppgift gick ut på att göra ett övervakningssystem för DC-system. Enheten skall användas för att övervaka isolerade DC-system avseende spänningsnivåer och isolation samt larma vid fel. Tidigare har man haft ett analogt system ute på marknaden men nu vill man ha ett digitalt processorbaserat system.Vi har använt oss av en 8-bitars RISC-processor. Programmeringen har gjorts i assembler med hjälp av ett utvecklings-kit och sköter logiken för övervakningen. Programmet manövreras med två tryckknappar och en display.Programmet vi har tagit fram behöver kompletteras med vissa funktioner.