ABSTRACTPressure ulcers are a serious health damage that causes great suffering, prolonged hospital stays and increased health care costs. Patients undergoing surgery are at high risk of developing pressure ulcers and it is the operating theatre nurse responsibility to protect against health damage through nursing. There are little research made in the area of perioperative pressure ulcer prevention. In order to investigate perioperative pressure ulcer preventive care measures that are described in the litterature and to answer the question how the operating theater nurse can protect the patient, a pilot study of a systematic literature review was carried out. Data base searches were conducted in PubMed and Cinahl from where ten articles were selected and examined for their quality and content.

Syftet med detta examensarbete är att på uppdrag av Volvo Construction Equipment hitta en metod för att hantera och kategorisera idéflödet i deras idéhanteringssystem Interact. Den metod som användes var kvalitativ innehållsanalys. Slutsatsen är att metoden gick att använda för att kategorisera idéflödet men att ett material som sträcker sig över många ämnen tenderar att sänka tillförlitligheten på resultatet. Vidare bedöms materialet som detta arbete har producerat kunna användas för att bättre ta tillvara på idéer, vilket uppskattas av Volvo Construction Equipment..

Background: A health damage that has been specifically related to nursing is pressure ulcers. Pressure ulcers are a complication caused by disease, care and treatment and can result in great suffering for the patient. Pressure ulcers can affect people both physically and psychosocially and is experienced, by most patients, as a serious and unnecessary complication of care. Today there are hundreds of identified risk factors for pressure ulcers described that can be divided into patient and care-related risk factors. A successful pressure ulcer prevention and treatment is to reduce or eliminate the underlying causes for the development of pressure ulcers, prevent deterioration and to treat existing ulcers.

This paper deals with archery in the Viking Age settlement of Birka and in particular the presence of Euro Asiatic, steppe nomadic archery equipment at the Birka Garrison and one Birka grave. The equipment contains for example closed quivers and a bow case. This paper also contains a discussion of archery battle techniques and tactics in Viking Age Birka and the implications of the above mentioned equipment to this discussion. The analysis insinuates the importance and status of archery in 10th century Birka..

SUMMARYThe first and most basic skill a rider needs to learn is how to sit correctly in the saddle. This decides whether or not the rider will be able to follow the horse?s movements and use her riding aids in an efficient way. This correct seat is based on a straight line between the axis of the hip and heel. The seat must rest against the saddle with equal weight on both buttocks and the inside of the thighs.

Pressure ulcers cause a lot of patients unnecessary suffering. This suffering could be decreased through improved knowledge about prevention, so that pressure ulcer will not appear. The purpose with this review was to study how nurses assess risk and prevent pressure ulcer, and to study how nurses use available knowledge. The method consisted of searches in databases and searching trough references. Our result is based on ten articles, qualitative, quantitative and reviews.

AbstractIntroductionWedged shoe insoles are used as a treatment for different problems in order to change the ground reaction force. They can secondary cause different loading patterns under the foot compared to normal. No previous study has, to the author?s knowledge, clinically evaluated the plantar foot pressure with different full-length wedges in normal persons.PurposeThe purpose was to evaluate the plantar pressure with different degrees of full-length wedges in normal persons.MethodTwenty persons with normal feet have participated in this single blind study. Wedges were produced clinically in four different shapes, 3° valgus, 0° flat, 3° varus och 6° varus.

AbstractVäxjö University, School of Social SciencesBachelor thesisTitle: Varför en rädsla för alternativmedicin? En studie om hur EU?s kosttillskottsdirektiv har implementerats i Sverige.Author: Annica BlomstrandSupervisor: Anne Haglund-MorrisseyThe aim of this study is to investigate the process of legislation and implementation of the directive of the European Union on the food supplements, focused on member state of Sweden.There are two questions in this study: What was the process of legislation in the period when the Directive on the food supplements became established? and How does the implementation of EU?s decision on the food supplements works in reality? In order to answer these questions, two different methods were used. One was qualitative analysis of the available text and the other one case-study (qualitative including interviews)The conclusion is that the implementation has not been successful. The process of legislation has followed its traditional way, which in its turn did not leave so much space to the thorough implementation of the Directive. Unfortunately, this is a process that overlooks citizens and countries with different premises, affected by the decision.Keywords: EU, kostillskottdirektivet, lagstiftningsprocessen, implementering, organisationsteori, fallstudie.

ABSTRACTThe discussions about energy use have increased year by year everywhere in the society, and so also in the healthcare sector. But what is actually energy use in a hospital facility, and what affects it?The typical way today to express the energy use is in kWh/m2. The problem with a key performance indicator that is expressed as energy use in relation to a specific area is that it does not take into account the activity in the building. Even though the activity to a very high extent affects the energy use.

By our employer Camatec Industriteknik AB have we been given the assignment to continue with the previous work ?Design of strip feeder?. Our goal with this work is to come up with a design basis for a strip feeder.Functionally a strip feeder consists of two rollers which with the aid of the friction between the strip and the coating on the roller create a strip force that pulls the strip through the working progress.Demands on this project:? 10 ? 600 mm in strip width and 0,1-1 mm in strip thickness.? Minimum 30m/min in production speed.? A maximum strip force on 30-40 kN.? The cost of the strip feeder?s components is to be considered of economy and quality.The need of a strip feeder occurs when the coil doesn?t manage to feed or pull the strip before or after a working process. The strip can otherwise be exposed by a permanent yield deformation or a change in the strip material if it?s pulled trough the working process only by the on ? and of-coils.

Sweden is a member of the European Union (EU) since 1995. The association results in considerable proportions of the European law, also called EC-law, for Sweden. The legal system has precedence above Swedish law, which forces our national court to take consideration into and interpret the law in the light of EC-law.Sweden doesn?t possess a general legislation of discrimination. An appointed committee investigates the matter and the requirement of a common law, including all discrimination prohibits.

The EU Services Directive has caused an intense debate across Europe. Its purpose is to remove obstacles to trade and to open up the public sector to increased competition. The Swedish labour movement has been deeply involved in the policy process, and union leaders have proclaimed the compromise reached in the European Parliament in April 2006 as a success.In the paper two major aspects have been considered: the meaning of the Swedish model and the process of Europeanization. The Swedish model previously allowed for a strong labour movement, through a social democratic hegemony, but the EU membership has implied new conditions for union influence. The paper examines how this change has affected the strategic choices of the Swedish labour movement, and how it has been manifested in the union's work with the Services Directive.

The global climate-change means increasing mean-temperature and higher precipitation in Sweden, which leads to shorter periods of frozen ground in the forest. At the same time the harvesting machines are getting bigger and more powerful. The forest industry aim at an even wood flow, and the ground damage has to be as low as possible. The two biggest causes for ground-damage is the bearing capacity of the forest ground and the ground-pressure of the harvesting machines. The aim of this study was to find out some rules for the machine choice considering ground pressure, when harvesting on ground with low bearing capacity.A field study, using a Valmet 890.3 forwarder, was carried out where different ground pressures and their effect on the ground were tested on two different types of ground.Additionally, an inventory of damaged harvesting grounds was made.

This thesis describes the redesign ofequipment designed for drying bags thatis used in Fresenius Kabis´manufacturing of their nutritionmedicine in Uppsala. The need of thistask arise during the start of thedevelopment of a new packaging line werethis equipment were meant to be used. Anevaluation of the bagdryers capacity andcapability was necessary.The work started with gathering ofinformation from suppliers of the usedcomponents and from the responsibleengineers for this equipment. Aneducation to learn how the equipmentworked and how to operate it were taken.That was followed by the creation of astudy plan were the tests were plannedto test different parameters effect onthe drying result and to see if thebagdryer managed to handle the bags ofthe correct format in the pace that theequipment should be designed for.The test results detected a need ofdesigning a unit with a function thatholds the bags in place while passingthrough the dryer in order to attainhigh quality results. The results werelater used for optimization of thedesign.

The purpose of this thesis was to develop and optimize a method of analysis for combustion of organic chemical products, followed by an ion chromatographic quantitative analysis. This was to be achieved with the decomposition equipment IKA AOD 1. The aim was to receive a precise and repeatable method that would be able to be applied to the process of qualification and technical marking of chemical products at the company, OKG AB in Oskarshamn. A complete instruction for the decomposition equipment and the method of analysis was written. A number of parameters were chosen from the general method of the combustion equipment, which then was tested parallel with a simultaneous development of an appropriate ion chromatographic method.