The Employment Protection Act (1982:80; LAS) is one of the cornerstones of the labour law that regulates the relationship between employer and employee. The central rule as stated in 4 § LAS is valid for an indefinite term. LAS is a semi-optional law in accordance with 2 § LAS which facilitates deviation from the central rule.Temporary employment is dealt with in 5 and 6 §§ LAS, regulations and collective bargaining agreements. The purpose of the legislative change on July 12007 was to simplify the use of temporary employment and to make the law more predictable and easier to interpret. The previous law was unnecessarily difficult for the employer to know when to put into practice.

This thesis includes a mechanical engineering design work performed incollaboration between ÅF and Halmstad University. The work is done by FredyOlsson?s methods of Principle- and Primary Construction and David Ullman?stheories of Design for Assembly.The group was commissioned by ÅF to produce a concept to narrow down theassembly time of today?s luggage doors by reducing the numbers of adjustmentoptions. They also wanted it to be easier to mount the assembly by making itpossible to adjust the door in a closed position. Today luggage door takes, with its10 adjustment possibilities, around 4 hours each to assemble and ÅF wanted anassembly time around 10 minutes per door.Initially a preliminary study was made where the group began reviewing today'sconstruction and mounting of rails and doors on buses.

In many products a compromise between ground clearance and the required space to store the product has to be made. This problem attracted the attention of the authors of this thesis.The objective of this project is to develop a functioning solution to a foldable wheel. The solution should be applicable to several types of product groups. A limitation for this work has been made so that the work only covers solutions for lighter vehicles.The purpose is to drive this project forward, so that a solution can be found. Furthermore the purpose of the report is to clarify how the authors proceeded to design and construct the wheel according to a fixed specification.

This thesis takes its starting point in the 27 Chapter 1, section 1 of the Swedish code of judicial procedure, where the following is found:?objects reasonably presumed important to a criminal investigation or taken from a person through a criminal act or subject to criminal forfeiture may be seized?In this thesis we have investigated what kinds of problems occur when the seized object is part of an investigation of IT-related criminality. We have used methodological investigations of Swedish laws, legal usage, and the Preliminary work with laws. Further have three interviews been made with different actors affected by or involved in seize of objects. These persons were a police officer, a public prosecutor, and a person whose object has been seized.The result we present is that there exist three kinds of problems related to objects that are seized within the demarcation of this study.

The aim of our study is to ascertain whether a hanging suspension fluorescentlamp for a private home environment is going to be attractive for a largeaudience. We want to open up for new uses of fluorescent lamps as lightsources.The main approach in this work is how to design a fixture with fluorescentlamps as a light source that will meet the requirements and requests of thehome environment could look like. At the same time we want to make a newimpression of how a fluorescent light source.Primarily we used a quantitative method, but this was rejected after a pilotstudy. Instead we used a qualitatively based method in the sense that weconducted a group interview as well as individual interviews.Based on data from the interviews and our Preliminary work a prototype wasbuilt. This prototype is a fluorescent fixture equipped with 2x14W T5fluorescent lamps, dimmed separately.

Aim: The aim of this study was to examine whether addicted in society maintain their personal dignity. Many studies about this issue have beenfocused on how hard it is to be an addicted, but few have focused on how an addicted handle this situation. Our preconception before this study was that addicts are a stigmatized group not treated with dignity. With this as starting point, our aim has been to let the addicted with their own words describe how they handle their situation and witch strategies they use to uphold their dignity.Method: A qualitative approach is used; we have condicted five semi structured in- depth interviews. The information we have obtained through interviews, we have in the analysis weighed against the theories we believe are relevant to our preconception.We have then categorized the collected information after those themes we found central in the interviews and which we have found can be related to the main questions of this study.Result: The results show many strategies about how people with drug- and alcohol abuse handle their situation.

This diploma work was performed because the company Sveriges BostadsrättsCentrum, with the abbreviation SBC, had a need to gain insight into how changes in the Work Environment Act and related regulations which took effect January 1, 2009 affecting their work with the work environment. The changes mean that the client may hand over his work environment responsibilities to a contractor and that he has to select so-called building work environment co-ordinators. At SBC they are working as representatives for tenant-owner's association when a construction is about to be carried out. The purpose was to ascertain how changes may affect the work at SBC. The diploma work intends to educate the staff at SBC how work with the work environment would look like if they met the regulatory requirements.

In April 2007 we contacted Lennart Augustsson at Designpartners AB in Västerås. He came up with the idea to investigate and evaluate their construction of a interaction beam, CSB-beam. CSB is short for Connector Interaction beam. The beam is based on a horizontal C-profile of high-tensile steel and in the bottom of the profile are vertical flat bar welded so called block connectors. These block anchorsare also made of hightensilesteel.

This study deals with work environment from a legal perspective. The study includes legislative history, legislation today and one empirical study. The legislation that concerns work environment (health and safety) in Sweden today is found in the Swedish Work Environment Act (WEA), the Work Environment Ordinance (WEO), Provisions issued by the Work Environment Authority, related legislations and also collective agreements. The WEA, passed by the parliament in 1977, came into force on the 1st of July 1978 and it defines the framework for Provisions issued by the Work Environment Authority, which is an authority superintended by the Swedish government. These Provisions contain more detailed stipulations and obligations with reference to the working environment.

The use of group contribution between consolidated firms is a common phenomenon in Sweden where taxation is not based on the return on the consolidated level but on the return on the individual firms. However, the process of handling the group contribution does not work without problems. This thesis analyzes three main issues where group contributions oppose the Swedish Companies Act. ? The Swedish Companies Act enacts the decision regarding group contributions to be made at a shareholder?s meeting.

In my essay, I write about the work at a pre-school in a segregated suburb. I begin my essay with examples from my workday. In one case, it is about Sara, playing games where other children are excluded and she also exhibits a power game towards me. In the second example, it is about how a group of children conspire and expose both themselves and others for destructive conspiracy patterns. When I write down what happens in the group of children at my pre-school, I see patterns reminiscent of destructive gangs.

In early January 2010 the authors participated in a meeting with the chief engineer for a company in which a central part is manufacturing of printed circuit boards (PCB). At this meeting it emerged that the machinery and production methods have changed substantially since the early 1990's. The spreadsheet for preliminary production time calculations by the company is today based on conditions from almost 20 years ago. The company has over the years been trying to adjust the spreadsheet template. The result of these adjustments has filled it with historical residue, something which makes the template difficult and time consuming when the primary user tries to handle it.The purpose of this study was to help the company increase its accuracy in the representation of the production times for the different PCB-based products by developing a new costing model based on an already existing but inadequate spreadsheet template. The company also expressed the wish that the new costing model would be less time consuming to work with.The methods used to achieve the goal are interviewing, participatory observations and meetings with relevant persons. The data obtained were analyzed using the theory on PCB production and visualization of data.

Work environment has been an important part of the Swedish working life for a long time and with the help of the Working Environment Law the work environment is mandatory. The purpose of this study was to gain a deeper insight into how the system of middle managers systematic work environment looks like. The question was: How do six middle managers perceive and deal with systematic work environment? A qualitative study was conducted with six middle managers from a global company. During the analysis, there were three main themes to be recognized (cooperation and support facilitates the work environment, problem with the systematic work and difficulties with staff) and six sub themes.

In May 1675, the local court in the northern Swedish parish of Nordingrå, which had approximately 1,000 inhabitants, held a preliminary investigation on 113 persons accused of witch-craft and superstition. For the majority of the 113, the main accusation was to have travelled to Blåkulla, a place where witches according to Swedish folklore participated in satanic festivities and rites led by the Devil himself. The preliminary investigation was held at the request of The Royal Witch-craft Commission. Nordingrå belonged to the province of Ångermanland, one of the Swedish provinces with the highest number of witch trials in the 1670s. The trials in Nordingrå have, more or less never been examined before, mainly due to the fact that no sentences or penalties were ever imposed.The purpose of this paper is to examine social relations and social conflicts in Nordingrå with the records from the witch trial 1675 as the primary source.

This essay investigates the work situation for teacher educators at a university with focus on the subject areas education, research and administration. The research questions contain the work situation the teacher educators have, how they apprehend it, and how they find their position within the work organisation. Six interviews have been executed at the teacher education at a university. Some of the results from the investigation indicate that the teacher educators find education to be very a very demanding work and that the split of work during the academic year is uneven. The work with administration before and after the education, for example work with syllabuses and descriptions for courses, are activities demanding much time.