The purpose of this thesis is to investigate if vacuum insulation panels are a competitive alternative to traditional insulation.Vacuum insulation has been used as insulation in buildings in Germany and Switzerland for a few years. In Sweden the high-performance insulation material is mainly used in refrigerators, freezers and vacuum thermoses. The development is proceeding well and vacuum insulation is becoming more common in the construction industry. Since it is a relatively unexplored material on the market there are many flaws and problems with the material.The questions we have chosen to answer in this report include an increased knowledge of vacuum insulation, various problems that may arise when handling/installation and the pros and cons of vacuum insulation compared to standard traditional insulation.The methods we have chosen to use in this report is a literature study, interviews with various suppliers and manufactures and calculations to show the differences between traditional and vacuum insulation. Vacuum insulation is 5-10 times better insulation than standard traditional mineral wool insulation, mainly at the beginning of its lifetime.Vacuum insulation panels (VIP) have a service life of approximately 50 years, whereas traditional insulation has a service life of approximately 100 years.

För att förebygga klotterbrott upprättade Västerås år 2012 och Norberg år 2002 varsin laglig graffitivägg. Denna studie undersöker med hjälp av klotterbrottsstatistik huruvida en minskning i antal anmälda klotterbrott har skett i kommunerna efter att väggarna upprättades. Datan har analyserats genom Z-tester. Västerås har delats in i tre områden med olika avstånd till väggen. Indelningen har gjorts då hypotesen i denna uppsats är att det har skett en minskning i antal anmälda klotterbrott i Område 2 och Område 3.

Mechanization of Swedish agriculture started in the beginning of the twentieth century, to be able to have more animals without raising the number of employers. The horse business has not by far kept up with these cost savings solutions. Cleaning out stables and feeding horses are the most time-consuming tasks in horse stables today. The most common way to clean out the stable is still by shovel and wheelbarrow. The clean out process can easily be mechanized through semi- permanently beds with movable walls between the boxes so that the litter can be removed by a tractor or a loader.

With the increasing costs in concentrate the importance in producing ensilage with a high quality is becoming more and more important. To succeed with this goal it is of importance not only to harvest in the right period, but also to be able to store the ensilage without a decrease in quality and nutrional values. To maintain a good ensilage the covering of the ensilage must be carefully made. An unsuccessful covering causes mould to grow in the ensilage, which both increases the work load and also increases the amount of feed which is wasted. A bigger amount of spoiled feed also increases the risk of feeding spoiled feed to the cattle.

The result of this work is a plan for the development of an 1128 m2 elderly raised garden. The purpose has been to create an overall plan covering the long-term development of the garden. The work process has covered a description of the garden of today, review of requirements, analysis of the garden sections, design of a new plan as well as starting the construction of the new garden. The plan covers a time period of a couple of years to create the new garden since the construction work is carried out during spare time with small resources available. The planning must contain review of functions such as protection from insight, eating area and compost area. Also the esthetic expression must be planned. Colors, shapes, choice of material and plants together make up the esthetic expression. It is recommended to include anything you wish to create in the garden. In a raised garden one has to overcome the step to remove trees and shrubs and think different.

This thesis includes an energy survey of the Herrgården pre-school, which has a modern heating- and ventilation system, and a comparison with Östers pre-school which has an older system. An energy survey of Östers pre-school has already been done by a group of three students and all the calculations and values have been collected from that survey. As of today, both pre-schools are heated thru district heating. It will be much easier to make smart and feasible energy-saving-measures by first conducting the energy survey.Herrgården pre-school in Gävle houses 81 children, therteen teachers, one cleaner and one cook. It was finished in the middle of 2009 and the staff has been very pleased with the in-door climate.

This thesis includes an energy survey of the Herrgården pre-school, which has a modern heating- and ventilation system, and a comparison with Östers pre-school which has an older system. An energy survey of Östers pre-school has already been done by a group of three students and all the calculations and values have been collected from that survey. As of today, both pre-schools are heated thru district heating. It will be much easier to make smart and feasible energy-saving-measures by first conducting the energy survey.Herrgården pre-school in Gävle houses 81 children, therteen teachers, one cleaner and one cook. It was finished in the middle of 2009 and the staff has been very pleased with the in-door climate.

This thesis includes an energy survey of the Herrgården pre-school, which has a modern heating- and ventilation system, and a comparison with Östers pre-school which has an older system. An energy survey of Östers pre-school has already been done by a group of three students and all the calculations and values have been collected from that survey. As of today, both pre-schools are heated thru district heating. It will be much easier to make smart and feasible energy-saving-measures by first conducting the energy survey.Herrgården pre-school in Gävle houses 81 children, therteen teachers, one cleaner and one cook. It was finished in the middle of 2009 and the staff has been very pleased with the in-door climate.

This thesis includes an energy survey of the Herrgården pre-school, which has a modern heating- and ventilation system, and a comparison with Östers pre-school which has an older system. An energy survey of Östers pre-school has already been done by a group of three students and all the calculations and values have been collected from that survey. As of today, both pre-schools are heated thru district heating. It will be much easier to make smart and feasible energy-saving-measures by first conducting the energy survey.Herrgården pre-school in Gävle houses 81 children, therteen teachers, one cleaner and one cook. It was finished in the middle of 2009 and the staff has been very pleased with the in-door climate.

The ability to tackle NP-hard problems has been greatly extended by the introduction of Metaheuristics (see Blum & Roli (2003)) for a summary of most Metaheuristics, general problem-independent optimisation algorithms extending the hill-climbing local search approach to escape local minima. One of these algorithms is Iterated Local Search (ILS) (Lourenco et al., 2002; Stützle, 1999a, p. 25ff), a recent easy to implement but powerful algorithm with results comparable or superior to other state-of-the-art methods for many combinatorial optimisation problems, among them the Traveling Salesman (TSP) and Quadratic Assignment Problem (QAP). ILS iteratively samples local minima by modifying the current local minimum and restartinga local search porcedure on this modified solution. This thesis will show how ILS can be implemented for MSA.

The aim of this Master's thesis is to explore how the localisation and the design affect the conditions for a school-media centre. A school-media centre is in this study a place where the students seek, find and evaluate information, discuss and exchange ideas. An active place for generating knowledge. The method applied in this study is "Space Syntax Analysis", a quantitative method with visual representation of the results. In the theoretical framework, space is the voids between walls, doors and ceiling, between furniture and bookshelves.

Rearing in organic pig production differs from conventional rearing; pigs have outdoor access and larger space allowances. Regardless of production system all pigs are transported before slaughter and during transport pigs are crowded together in a new environment and in a space smaller than they are used to. As pigs in organic herds are reared at even larger space allowances than conventional pigs, such crowding could possibly have a stronger impact on pig behaviour and well-being. Six pig producing herds, three conventional and three organic, were visited and pigs from each herd were enclosed during 12 minutes in a test area corresponding to the crowding on a transport vehicle. During the crowding, pigs? behaviour was observed, before and after enclosure in the test area skin lesion scores were recorded, and also measures of heart girth (for weight estimation) was done.

The private sewage systems in Sweden releases around 600 tons of phosphorus per year, compared to about 350 tons from municipal sewage treatment plants, and they account for approximately 21% of the total anthropogenic discharge of phosphorus into Swedish waters. About 40% of Sweden's nearly 1 million private sewage systems are inferior with respect to emissions to surface and groundwater. The technology of small sewage plants is under development and knowledge of treatment effects for different solutions is poorly consolidated. Municipal authorities lack resources to keep up with the technologic development and assess the reliability of the treatment performances that suppliers report for their products. The thesis aims to conduct a market review and evaluation of wholly or partially prefabricated small sewage plants, to make it easier for municipalities and property owners to assess different technical solutions. The goal is a compilation of the products on the market, evaluated on the basis of the reliability of specified degrees of reduction.Information on sampling procedures and test results were collected through a questionnaire to all active suppliers and the responses were then used to classify the products.

All new households were to be constructed with "near zero energy house standards" (NZE-house) by the year of 2020. The ambition to construct energy-efficient buildings had to increase rapidly in the spring of 2013.The purpose of this report was to increase the interest for building contractors to construct apartment buildings with passive house standards. By locating and evaluating experiences from an existing passive house a case study including interviews, field visits and document analysis was made. Research of literature regarding other passive houses in Sweden also helped to answer the following questions:- What positive and negative experiences have the study of the passive house meant to the involved stakeholders and residents?- What improvements can be made based on identified experiences?- How can an apartment building be designed as a passive house based on possible improvements?By collecting good and bad experiences, as well as improvements and potential design proposals, a diagram was created designed as a tool for developers when constructing apartment buildings with passive house standards.

This is a degree project performed at Halmstad University in Sweden on the subject carpet ofreinforcement. This project is developed in association with Celsa Steel Service in Halmstad.The purpose of this report is to investigate how much time that can be saved if carpet ofreinforcement is used instead of the traditional way to work with reinforcement and seewhat kind of parameters that is important between the choices. We are also going to seehow this product affects the situation for reinforcement workers from an ergonomic point ofview.Carpet of reinforcement is made by straight reinforcement?s bars that are welded togetherwith steel bands. These rolls are made at a factory with a machine that welds together thebars in determined centre distance, with desired dimensions after the constructionengineers? blueprints.