In 1999 the Swedish Parliament decided about 15 environmental goals aimed to be achieved in time for the next generation. For example physical social planning must be based on programs and strategies how cultural-historical values has been attended, so called programs of cultural heritage. By law the Swedish municipalities are responsible for reaching these goals by creating program of cultural heritage. But only a few of the municipalities have these programs, meaning that many municipalities need to create programs of cultural heritage in the next five years.The aim of this report is to present a model of analysis on programs of cultural heritage in municipalities for preservation and development of cultural environments. By testing the model on the municipalities of Osby and Tomelilla methods on how to create a new program of cultural heritage or how to complete existing documents are formulated.One of the conclusions is that one document, program of cultural heritage, functions as landscape analysis, model of cultural valuation and strategy of developing cultural values.

This thesis investigates lacks in today?s use of the ERP-system Mapaz Affärssystem inthe production planning at Solna Pressgjuteri, and possible improvements. Today thedates calculated by the program to plan the orders are inaccurate and the ordersequence is not optimal, and therefore continuous manual corrections are needed.The approach was to study the program Mapaz to understand how it works, andidentify available parameters for input and output in the different tools offered in theprogram. By studying old lists of planned orders and relevant parameters in Mapaz forindividual orders, production groups, products and operations, the connectionbetween input and output parameters could be understood.Participating in planning meetings and discussions with the company behind theERP-system identified the current usage, desideratum and possibilities with theavailable tools. These were then matched to describe the reasons to the insufficientplanning and form possible actions for improvement.The work has showed poor understanding for the ERP-system and its functions, assome tools intended to assist the planning were not used, and some even usedincorrectly.

Purpose: Our purpose is to describe and understand how a project-based, knowledge-intensive firm in the high-technology industry creates and transfers knowledge, seen from two perspectives.Methodology: Our qualitative case study has an explorative approach since earlier studies within our positioning are absent, thus we look at KM abductively. To gain more depth to our study, we mirror our findings from our case company with data collected from three additional organisations.Theoretical perspectives: We see a clear distinction between researchers, either seeing knowledge as an object or a process. Thus, we review theories from both sides, either focusing on the creation or transferring of knowledge. In addition, theories on KM in project organisations areaccounted for.Empirical foundation: The study is based on the empirical foundation which consists of the data received through six interviews with employees at our main case company and, additionally, two interviews at each of our three mirrorcompanies.Conclusion: The study found KM being seen from both perspectives in all four firms. Through this, we found implications for how our case company could proceed in the future..

This study has been made on behalf of the Swedish Transport Administration to study the work of the department National Projects. The Swedish construction industry has for many years been characterized by low productivity. By being the largest purchaser of contracts in the industry the Swedish Transport Administration has a unique opportunity to influence the productivity. In order to improve in productivity The Swedish Transport Administration is adopting a new role in which they will order more turnkey projects. In our study, we will focus on how one department within the Swedish Transport Administration, National Projects, can perform successful turnkey projects.To clarify how the department National Projects can perform successful projects, this study identifies critical factors for projects and their links to different phases of the project.

Background Being outdoors on a regular basis is beneficial for all individuals, people with dementia who is living in special accommodation have not always that possibility. If the person with dementia live in a stimulating environment can contribute to the person's functions are maintained. Aim To provide a basis for evaluation of a new outdoor environment at a special accommodation for people with dementia. Method of data collection in action research was done through focus group with staff on the accommodation and the participants in the project, a total of five informants. Results Informants thoughts and experiences were analyzed and divided into three main categories to describe the project - design, obstacles and goals.

In urban planning and design today interventions tend to take place in already existing areas and inevitably effect also surrounding areas. The many parties involved in any change leads to a demand for a shared language around these areas. This thesis aim to, through understanding and communicating a site, Stora Södergatan in Lund Sweden, inspire to a novel way of looking at an urban site preceding design- or planning interventions. Based on a theoretical framework where site is considered as a relational construct, material as well as immaterial, a framework for site thinking is constructed. Further, with theory of representation, the communication of the site is emphasized and accounted for as part of the framework.

The purpose of this paper is to examine how the revised Planning and Building Act (SFS 2010:900) have influenced the comprehensive planning in Swedish municipalities. A focus is directed at examining how the new law regulates a greater consideration to climate aspects and the what consequences this results in regarding the implementation of the law in Swedish municipalities comprehensive plans.The paper is a case study, containing both quantitative and qualitative methods. The case study is based on three municipal comprehensive plans. Based on quantitative material three municipalities have been selected to constitute the sample of this study. These municipalities are A?lvsbyn, Sollentuna and Olofstro?m.

This report is the documentation of a project in the education Master of Science in Mechanical Engineering. The project was carried out at Alfakonsult AB. The purpose of the project was to map out the transference of information between the different operators in the supply chain of medicine in Sweden and to analyse this in order to reduce lead-time and the total throughputtime. The supply chain of medicine in Sweden consists of producers, distributors, one wholesaler, prescribers and patients. The mapping of the transference of information showed that most operators in the supply chain have done well introducing technical aids to facilitate the transference of information.

Hammarkullen tillkom under slutet av 1960- talet och början av 1970. Området har formats av den tidens ideal med breda vägar och uppdelade funktioner. I Hammarkullen har få förändringar och förbättringar gjorts sedan det blev till. Genom att studera området, hur det ser ut idag, kvaliteter och brister, samt genom analyser har jag valt att främst fokuserat mitt arbete på: ? komplettering av bebyggelse ? utveckling av den yttre miljön ? utveckling av torget Huvuddelen i mitt examensarbete ligger i planförslaget.

This thesis project is based on a business idea where users can design their own t-shirt online. The project shows the first step in the development process where a prototype for a user interface is created and evaluated.The purpose of this thesis project is to answer the following question:How does one develop a user interface for t-shirt design with consideration to interaction design theories?In order to answer this question the design process began with scheduling the work at hand. The first step was to build a conceptual model based on specifications made prior to this project. This conceptual model became the foundation for the physical design.A high fidelity prototype was created using Macromedia Flash and Actionscript 2.0.

Ett samhälle där en hög andel av transporterna sker på cykel har många fördelar för miljön, hälsan och ekonomin. Inom staden har cykeln även fördelen att den tar lite utrymme i anspråk och kan bidra till en attraktivare stadsmiljö. Syftet med detta arbete är att presentera åtgärder som ger förutsättning för en ökad och säker cykeltrafik. Baserat på svenska och utländska riktlinjer samt exempel från städer med en hög cykelandel ges en överblick över olika sätt att främja cykling i staden. Det handlar om att inkludera cykelplanering i övriga stadsplaneprocesser, att skapa strategier för stadens utveckling av cykling, att satsa på fysisk infrastruktur anpassad efter cyklisters behov och att informera och följa upp de mål som sätts.

The students have been assigned a task from Consid, were they are supposed to develop a web based platform for handling the company?s consult CV:s. The key features of the system are to simplify the administration part at mission procurements towards customers and to match qualified consultants to certain missions.Consid is an international it-consult company and have about 1000 consults working for them. When Consid makes mission procurements towards a customer they have to manually match the best consult against a certain mission, this is both time consuming and complicated.The students started the project with big visions and thoughts about how the work would be performed and how the system would be developed. After the initial meetings and the closer it came to the beginning of programming it became clear that the expectations were too big.

This degree project was conducted in collaboration with Gremo AB located in Ätran.The aim of the project was to develop a solution to secure quality and to help assemblingthe locknut holding the vertical hinge on the harvesters and foresters from Gremo.At this time the nut is assembled manually by the aid of an overhead crane. The nut istightened differently from time to time, and there was no specified torque to which it istightened. Another present problem was the locking washer which sometimes getsdamaged during assembly, when this happens the procedure has to be started over fromthe beginning. The current assembly procedure is very time consuming and lengthy forthe employees.Our task was to design a machine that could tighten the nut to a specified torque with amargin of error of ± 3%. The assembly procedure will be held simple and the timerequired at a minimum.The project started by developing several principle solutions, the one solution that bestmatched our specifications were developed to a primary solution.Today we have started manufacturing and assembling our prototype.

This term project addresses how to develop construction drawings for a general contract. The project contains supervision, including blue prints as support as needed.Apart from directions on how to carry out the actual work, the supervision also discusses regulations governing all construction drawings. The supervision is created as guide for similar projects.The construction drawings is a complete construction guide, hence it includes all construction drawings. In addition, a room description and a general description is included..

The work has been carried out in cooperation with the company Zenit Design in Malmö. The project's goal was to restore, improve and produce an ozone generator. During the project, the authors sought relevant literature in databases, been in contact with US suppliers of fuel cell membranes, Asian suppliers for the processing of Teflon and Titanium parts in mechanical engineering and Swedish suppliers of various standard components. The authors had access to a temporary lab at Zenit and electron microscope at Halmstad University where material tests were performed. The authors have also had access to measurement equipment to measure amounts of ozone.During the work, the authors have mapped how an existing ozone generator works and then have their own development.