Nowadays the majority of the thinnings made in Swedish forests are done by machines, harvesters and forwarders. The most common model in thinning with a harvester is strip-road operated thinning and stand-operated thinning with one intermediate passage between the strip-roads. This study is a time study with some quality follow ups on a strip-road operated thinning model, a stand-operated thinning model with one intermediate passage between the strip-roads and a stand-operated thinning model with two intermediate passages between the strip-roads. The machines in the study were a small harvester (Forestline MPM C90) and a medium sized forwarder (Timberjack 1110). The study was made in Litsnäset outside the city of Östersund in Sweden and was made during the autumn 2007. In a lodgepole pine stand six study units (0,6 ha) were thinned with the three different models, two study units per model.

This thesis includes a review of scientific studies of tree injuries following mechanized thinning. Interviews have been made with drivers of single grip harvesters and forwarders in forest thinning and a number of essential factors have been identified as the most important to take into account in order to minimize and/orprevent injuries to stems and roots of remaining trees..

Det finns en rad satt att beskriva gallringsformen. Ofta används begreppet gallringskvot i dessa sammanhang utan att närmare ange vilken metod eller definition som använts for att beräkna den. Detta kan lätt leda till att missuppfattningar uppstår. Denna studie belyser olika definitioners känslighet for bland annat beståndsstruktur, gallringsform och stickvägsavstånd. Studien innehåller dessutom en jämforelse mellan olika metoder att mäta och uppskatta gallringskvoten i ett bestånd.

The demand for renewable energy is increasing in Sweden. This consequently increases the pressure for and willingness to pay for forest fuels. One method to extract forest fuel from suitable commercial thinnings is the "long top method? (LT-method). With this method saw logs and non-delimbed tops are recovered, i.e.

When Norway spruce is planted with large initial spacing and grows on highly productive sites in southern Sweden, a high proportion of the stems gets broad annual rings. The thinning programme carried out at the estate of Trolleholm aims to extract stems with too broad ring width. The 3-4 first thinnings are carried out as thinning from above, where only the thickest trees are removed. The internal distance may not fall below 5-7 meters depending on the number of thinning (short distance in young stands). The aim of this study was to examine the thinning model that is carried out at the estate of Trolleholm. A volume table is calculated to describe the model, and data is collected on temporary plots.

With knowledge of how the southern Swedish forests have been affected by storms the past years, this study intended to find out which factors affect the storm firmness of a stand the most. The study was based on data from stands in the, by the storm Gudrun, affected area. The results of the analyses that tested the stand factors that influence the amount of storm damage to the greatest extent showed that the storm sensitivity of Norway spruce stands were largely due to previous management actions. The factors that could be controlled by thinning and had relevance of storm damage standpoint, according to the results were; the dominant height, volume, basal area weighted mean diameter and stand age at last thinning. In this study, these results are not as clear for Scots pine.

Silviculture in young stands in Sweden is below the mark concerning what has to be done in the forest, and it is time to solve the problem. The problem will not be solved only by the private forest owners, professional help is needed. Skogsägarna Mellanskog is one of four forest unions in Sweden who wants to play a role and take responsibility for forestry in the middle of Sweden. This academic essay is based on a market survey sent to 350 forest owners in the Örebro district. 186 of them answered the questions, giving a response frequence of 53 percentage. The purpose of the essay is to find the determining factors which will make a forest owner to find a collaborator when planning and carrying out the silviculture measures in young stands. The result of the survey shows that the forest owners are anxious about the price and the costs. The costs have a severe effect if the silviculture measures in young stands will be carried out or not.

According to the Board of Forestry, in Västerbotten, many natural regenerations of Scots pine (Pinus sylvestris) carried out on privately owned forest in the middle of 1990 in Västerbotten have rendered a bad regeneration outcome and will provide a low future forest production. The Board of Forestry believes that the negative result can be explained by the fact that the regeneration has been carried out in wrong locations and that scarification failed to work as planned. In order for an accepted rate of regeneration the guidelines of the Forrest Act require, not less than 10 years after final cutting at natural regeneration, that there should be at least 1300 (site indices 16 m) - 1700 (site indices 20 m) main crop stems per hectare. Main crop stems are defined as stems according to the place of growth and appropriate tree type, in addition with regard to quality, stage of development and damage risk have a prospect of succeeding. In addition main crop stems should be separated by surface so that the proportion sample plots with 3 meters radius, and lack main crop stems, are not more than 10 % of site indices 14 meters or higher.

SCA has today almost 300 000 hectares of their forest land planted with lodgepole pine(Pinus contorta var. latifolia). Due to initial extensive planting in the 1970ies the area oflodgepole pine forests in the thinning age has grown rapidly from the end of the 1990ies.During the years 1996-2005 first commercial thinning of lodgepole pine at SCA took place.The goal of the hereby presented study was to investigate the growth and stability in thosefirstly-thinned lodgepole pine stands a few years after thinning. Furthermore, the objectivewas to investigate the relationship between stand stability and different stand parameters.Additionally, lodgepole pine stem quality was estimated.The study is mainly based on the data collected during an inventory project carried out atSCA in 2008. Altogether 91 lodgepole pine stands in northern Sweden were measured afterthe first thinning.

The purpose of this study was to analyze the two thinning models: Bergvik Skog´s thinning model, which is based on total stems and dominant height, And Swedish forest agency´s thinning model which is based on basal area, habitat index, dominant height and recommended number of stems at final felling in Heureka´s StandWise and PlanWise. The data we chosen for our study were taken from the Swedish National Forest Inventory and we were creating a simulated stand based on a great number of sample plots in Region three from The Swedish National Forest Inventory. We had chosen to create one stand with low habitat index (T20) and one with high habitat index (T24). Our purpose were to come as close as possible to a natural stand in central Sweden. We performed the thinning in StandWise and analyzed the data I Excel files. Our thinning optimizing´s were performed and analyzed in PlanWise. There wasn´t any big differences between the thinning on the lower habitat index.

This thesis is about the effects of fertilizing and thinning on furniture timber from redwood. Interviews of furniture manufactures have been made and observing of timber from the Swedish fertilizing and thinning trails. The result from the interviews showed which properties that is important for the furniture manufactures and then the result from the observation showed which type of management of the forest that gave the most timber that had those properties. .

Wind damages next to strip roads in 1st and 2nd thinning in Boxholm, Östergötland Anneli Fransson, SLU, inst f sydsvensk skogsvetenskap, Examensarbete no 108 Wind damage is something we are all familiar with since the storms Gudrun (2005) and Per (2007). Research about strip roads and wind damage is very limited. It is commonly known that the trees next to the strip roads more often fall whit heavy winds, and the purpose of this thesis was to verify this statement. Data was collected from first- and second thinnings at Boxholms Skogar AB, Östergötland. In first thinnings data was collected from both spruce and pine stands and second thinnings only data from spruce stands was collected.

This is a study on the outcome of the Swedish Forest Agency´s mission to provide individual advice to private land owners about precommercial thinning. The study was conducted in Sala municipality and included forest owners that had received private individual advice from a Swedish Forest Agency consultant as well as forest owners that had not received individual advice. One of the central issues was to make comparisons between these two groups. The survey was carried out by telephone interviews combined with a smaller field study. The questions were designed to provide information about to what degree the forest owners had been affected by the advice and if there had been a change in the way in which precommercial thinning was performed. In terms of the amount of precommercial thinning that had been carried out, no statistically significant differences were found between the two groups.

Den här uppsatsen grundar sig på två fältstudier i nyutlagda demonstrationsförsök på Asa försökspark som ska användas i utbildningssyfte. Studie 1 bestod av försöksytor i ett 13 år gammalt bestånd som röjts till samma röjningsförband men med tre skilda metoder; motormanuell selektiv röjning, maskinell stråkröjning och som en kombination av bägge metoderna. Syftet var att beskriva det nuvarande tillståndet, simulera fram prognoser för beståndsutvecklingen och beräkna dess ekonomiska konsekvenser fram till och med första gallring och jämföra de olika metoderna med varandra. Studie 2 bestod av försöksytor i ett 23 år gammalt eftersatt bestånd där fyra olika åtgärder testades; ingen röjning innan gallring, underröjning i samband med gallring, sen röjning och skogsbränsleuttag. Syftet var även här att jämföra de olika metoderna med varandra genom beskrivning av det nuvarande tillståndet, göra prognoser för beståndsutvecklingen och beräkna dess ekonomiska konsekvenser vid första gallring och i den här studien även fram till och med den andra gallringen.

In Sweden, harvesting Pre-commercial thinning (PCT) stems for energy purposes is a interesting way of financing the high cost of preparing dense stands for a profitable first conventional thinning. This concept can be labelled bioenergy thinning. The aim of this study was to quantify the productivity of a Vimek 404R light harvester with an accumulating Naarva-Grip cutting head during the bioenergy thinning of a self-regenerated stand west of Sunnansjö in Dalarna. The stand was birch-dominated, contained 15 371 stems/ha, and measured on average 4,6 cm Dbh and 7 m tall. Even though the driver was well experienced with the machine, the stand in question was the first one that he ever thinned in this manner. Nevertheless, the driver strived to accumulate as many stems as possible during each crane cycle and chose to cut taller stems in half so as to make the handling and forwarding of the harvested stems easier.