Sökresultat:
882 Uppsatser om Pre heating of wood chips - Sida 43 av 59
Åtgärder för att minimera trafikbullers påverkan på ett rekreationsområde
The aim of this inquiry was to investigate the most appropriate measures to reduce noise impacts from road traffic on the Nydala recreational area in Umeå municipality due to the planned re-routing of the E4 motorway to an existing road along this area. The sound environment is an important part in the experience when we are visiting recreational areas. Noise is not only disturbing; the liberty from unwanted sounds also allows us to perceive natural sounds that are a benefit for the cultural experience. Therefore it is important to take actions to protect this well used area from traffic noise. The reasonable options to avoid noise impact in this case are to lower the speed limit, using a noise reducing coating or use noise protection screens and walls.
Experimentella och teoretiska uträkningar för skruv- och bäddhållfasthet för takinfästningar mot stålstomme
Lättelement located in Örnskoldsvik AB is one of Sweden's leading companies in the development of building elements in the form of roofs, walls and floors made ??out of light beams. The company has clients from Lund to Kiruna, and from Norway. This means that the elements have high standards when they have to take many different loads from wind and snow due to such wide geographic variation.The roof elements are structured so that the main body is made of light beams with an I?profile.
Klövviltets nyttjande av foderraps på viltåker och betespåverkan på angränsande skog
Today we have more game species than ever before in our landscape, both regarding number of species and number of individuals. The increasing number of wild species is an increase in game recourse for the countryside. The increase of game species, however, has negative effects on forests and agriculture land. The negative effects for forestry are damages on economic important trees, due to losses in production and quality. However there are ways to decrease the damage on valuable and important trees.
Lönsamhet i att avverka virkesrik fastighet innan försäljning
The purpose of this study is to find out the viability in performing final felling in stands with high timber volume or if it´s more profitable to leave these stands to the next owner. Will he or she pay more for the standing stock then the industry? The prices of forest-land have increased significantly over the last couple of years in Sweden and some properties seem to go higher than others. Is this because of higher standing stock volume or can a certain volume/hectare bring a higher price? Maybe a combination of both? This study is based on the the sale-statistics for 2012 from real-estate agency Areal.
Prognostisering av sortimentsutfall från stående skog med hjälp av befintliga data : anpassat till Sveaskog Norrbottens planeringsprocess
This study in the subject of forest planning is made for Sveaskog and its aim is to develop tools that prognosticate outcome in terms of volumes per sort from not yet cut forest stands. The degree of detail is just to get reliable results for at least one months volumes, for Sveaskogs own forestland in the market region of Norrbotten that is about 100 000 m3fub. The course of action to accomplish this is regression analysis and the data consists of cut tracts on own forestland in Norrbotten during the years 2006, 2007 and 2008. That is a little more than 4 million m3fub. Two tools were made.
Vidareutveckling av PV/T-receiver för koncentrerat solljus
The rising demand for electricity and heat raises a big challange for the society and engineers. Many products have been introduced to the market to supply more energy to the energy systems. Absolicon AB is a Swedish company that develops and markets a combined heat and power generating product. The product, Absolicon X10, uses a parabolic trough to concentrate the radiation of the sun onto a receiver. The receiveris equipped with mono crystalline solar cells and is cooled by a circulating liquid media.
En förundersökning om vilka marknadsstrategier man kan använda för ved/pelletskaminer
Företaget TräEnergi Teknik AB säljer pelletskaminer. Försäljningen av produkten går inte så bra, men ägaren Carl-Axel Fagerström tycker att produkten borde vara efterfrågad av kunderna eftersom den är både miljövänlig och prisvärd. I denna rapport undersöks hur företaget kan ändra sina marknadsföringsstrategier för att nå ut till potentiella köpare. En enkätundersökning har gjorts hos återförsäljare för att ta reda på slutkundernas behov och önskemål. Ur undersökningen framgick att även om kunden är miljömedveten går priset alltid före.
Lantbruk i framtiden : ett praktikfall
The economic prerequisite to many farmers in Sweden after the EU membership and the
new agriculture policy has generated large demands on the farm management. Until year
2004 you got a grant based on what you had produced and not on consumer demand. In
2005 a new economic aid (Mid Term Revue) was introduced and the conditions has
changed again. Due to this I have chosen to do a cost-benefit analysis on a case, to
investigate if the present production is sustainable in the future.
My conclusion is that the profitability is acceptable even if the farm has a high debt. But
to make the production more profitable the products produced should be refined as much
as possible at the farm, to get maximum economic return.
Utveckling av golvlucka för hoppgropssystem i kommunal idrottshall
In this thesis a concept for floor hatches for foam pits has been developed. Since there is an existing solution that is powered by hydraulics and is expensive, the goal was to develop a cheaper solution, as simple as possible.A number of different concepts were developed and evaluated. A concept with five sections that are pulled to the side and stacked on each other was chosen as it was thought to have the lowest risk of crush injuries and to be easiest to manage and control. In the opening behind the foam mattress a lifting table is placed to regulate the height of the stacked sections.To be allowed to be installed in the floor of sports halls the sections must be dimensioned according to the construction standards for these types of buildings. Different dimensions of beams in steel and wood materials were evaluated and of those, who lived up to the requirements of the standard, a concept was chosen.
VISION SJÖSTAD : Flytande Bostäder
Floating housing is a concept gaining ground in Sweden. The dwellings are different in many ways from traditional homes, not only regarding flotation, but also several other technologies. The purpose of this thesis is to emphasize the qualities that exist in living on water. The ambition was to present a proposal for a floating residential area located in Jönköping, containing homes of varying sizes, and to present their technologies. In order to find inspiration and solutions studies have been made on existing floating homes in Stockholm and Kalmar, focusing on their technical and functional solutions.
Flexibel isolering av fönster för att minska energiförluster
The first part of this essay is about a single-family house that we have planned and projected. Thesecond part is a deeper study in ways to further insulate windows when they are not in use.In the first part the building?s design and its most important construction elements are described.The planning of all major installations (heating, domestic water, ventilation, sanitation, electricity)are reported so that one can in principle start construction of the house. In addition there arecalculations done on the building?s energy management.The result is a two stored house angled toward the south.
Bättre åtkomst till avverkningstrakter med anpassat marktryck från avverkningsmaskinerna
The global climate-change means increasing mean-temperature and higher precipitation in Sweden, which leads to shorter periods of frozen ground in the forest. At the same time the harvesting machines are getting bigger and more powerful. The forest industry aim at an even wood flow, and the ground damage has to be as low as possible. The two biggest causes for ground-damage is the bearing capacity of the forest ground and the ground-pressure of the harvesting machines. The aim of this study was to find out some rules for the machine choice considering ground pressure, when harvesting on ground with low bearing capacity.A field study, using a Valmet 890.3 forwarder, was carried out where different ground pressures and their effect on the ground were tested on two different types of ground.Additionally, an inventory of damaged harvesting grounds was made.
Biogasprocessen : Bestämning av verkningsgrad
Biogas is increasingly used for fuel in for example vehicles and it´s produced in a biogas processconsisting of the steps of pretreatment, digestion and gas cleaning. The pretreatment is a method usedto increase the gas production and / or destroy pathogens. The digestion is the stage when anaerobicmicroorganisms convert bio-mass of a substrate to a raw gas containing about 65% of methane. Thegas cleaning is used to increase the methane content to about 97% so the gas can be used for motors invehicles. The biogas part of the Ekeby sewage plant in Eskilstuna is using multiple substrates.
Reading space. Möbel för läsning till Göteborgs nya stadsbibliotek
Reading spaceFurniture for reading for the new city library of GöteborgThe main purpose of my project has been to inspire people to read books at the library. I wanted to create something very site specific and chose a room on the second floor of the new city library to work with. To be able to relax, feel inspired and to concentrate on reading, the visitors of the library need to experience a sense of security. My solution to the different conditions or problems in the room and the needs I identified is a seat hanging inside a frame. When sitting down in the seat, the frame is low enough to see over but it is still experienced as a private spatiality.
Realisering av en modulär skogsmaskin - En skalmodell
Wood for commercial use is harvested from forests using forest machines like harvesters which folds, branches and cuts trees and forwarders which transports logs to a landing area for further transport to a processing facility. Future forest machines have to be much gentler to the machine operators and forest soil than today's machines. Hence new machine solutions must be developed and tested. A practical way is to develop a physical scale model which can be used as a test-bed to incorporate different types of solutions for suspensions, cabin damping, tires and tracks, crane and overall architecture. The aim of this project was to develop such a 1:5 scale model of a forest machine, named as ?Skogbil.A scaling strategy was employed to arrive at important scale dimensions and specifications ofSkogbil which would be comparable to the full scale model.