This report will show the energy usage of Hotel Princess in Sandviken, Sweden. When the hotel changed owner an examination of the hotels heating, ventilation and sanitary systems were done. The report showed flaws in the ventilation system, and is why the new owner wanted a closer look at the energy use of the hotel. The original building was built in the 1930s and two major extensions have been built, one in the 1950s and the most recent in the 1980s. An assumption made is that the building parts were built to the restrictions during the time. Activities on the hotel include sleep over, conference, night club, massage and swimming in the hotels pool section.

Norske Skog Jämtland AB is like many other companies in a situation where it has to increase its purchases to provide its industries with raw material. To increase the available amount of raw materials, many companies employ purchasers to cover larger areas. This study aims to find out how to handle the increasing competition for timber suppliers. An important input for defining such a strategy is to examine how the suppliers view their relation to the company today. For a company it is extremely important to have a good relation with the suppliers to secure long term supplies.

This report is the result of a degree project in building engineering, at an advanced level. The project evaluated a building from a technical and historical point of view, and focused on its energy consumption, particularly the energy used for heating. The building in question was a small apartment building in Strömsholm, Sweden. It was made in 1902, from vertical logs, a not so common form of the traditional log house. The goal of the project was to evaluate if the energy consumption could be reduced in accordance with building preservation regulations, that is without damaging any of the building?s cultural or historical values.The building was surveyed with the help of archive and literature studies, interviews and inspections.

Sweden is a country that has made some progress in developing energy efficient solutions. The problem in Sweden is that many houses and apartment buildings are old and have inefficient ventilation- and heating systems. This energy is lost when systems are inefficient, which then results in huge economic costs. Luckily, more and more people are becoming aware of this, which means that Sweden is on track to become even better within energy efficiency.Energy use for the housing- and service sector amounts to 166 TWh of total use at 616 TWh. Without distribution and conversion losses, these figures show that the housing- and service sector accounts for almost 40 % of the country's total energy consumption.

Deciduous forests are, according to the National Environmental Quality Objectives, a priority area. Deciduous forests are rich in species and the occurrence of dead wood is an important factor for biodiversity. In order to identify valuable deciduous forests for bio-diversity, conservation needs good analyses and planning tools. Habitat models combined with geographic information systems can be used to study the spatial structure of suitable habitat. The Lesser spotted woodpecker (Dendrocopos minor) has been proposed as an indicator species for deciduous forests, since this species is highly specialized on insect larvae in dead wood and requires large areas of deciduous-rich environments. Many riparian forest with high species richness and high nature conservation values are found along the Ume river in Umeå municipality.

This report is a thesis work for a B.Sc. in Forestry at the School for Forest Engineers, SLU. The aim of the work was to compare two different pricelists with the actual output from a harvester. The results have also been compared with a volume estimate of standing trees done by the Swedish Forest Agency and the ?true? value registered by the Wood Measurement Association. The study confirms that the output calculated by the computer on the harvester is more reliable than the volume of standing trees estimated by Swedish Forest Agency. .

AbstractThis report intends through a case study to investigate if lightweight concrete isappropriate as main material in the outer wall of a seven storey residential building.A technical design is carried out in accordance with the definitions and requirementsfor passive houses, given by FEBY?s1 ?Demand specification for passive houses?.A literature review is also carried out for a comparison between regular bolt wall andlight weight concrete wall, with a focus on the safety of moisture.The lightweight concrete block used in the report is as a celblock produced by thecompany H+H Sweden AB.The methods used have resulted in compliance with requirements andrecommendations from authorities. Calculations of energy, noise and moisture riskassessment has been carried out.The work has resulted in the conclusion that the lightweight concrete itself is notable to isolate in the extent necessary to obtain chosen U-value of 0,1 W/m2 ° C,without getting to thick. Therefore additional insulation is needed. There are fewrelevant reference objects built with only light weight concrete.

Södra Skog chose in 2011 to convert the saw mill in Traryd to a gradually refined sawmill of hardwood. In 2009, they had also acquired the hardwood sawmill in Djursdala. This was strategically important for Södra's business since the demand for hardwood products has increased. The standing volume of deciduous trees in Sweden is today approximately 524 million m3sk and it has increased rapidly in recent years. However, the deciduous forests are to a large extent located in areas that are set aside for nature conservation and is thus not available to the industry.The goal of this work is to create a simple and reliable method for mapping of deciduous wood volumes in areas where Södra Skog is operating (Götaland excluding Gotland).The material that is used is raster databases with estimated forest attributes (kNN-Sweden), data from National Forest Inventory (NFI) and forest management plans.

Each year, the coffee machines at Ericsson in Kista produce around 100 tons of ground coffee waste.The companies Coor Service Management, Löfbergs Lila and Selecta are all responsible for differentstages in the logistical chain in delivering coffee and, together with Ericsson, they want to increasetheir environmental benefit. The plan is to produce biogas through anaerobic digestion instead ofincinerating the coffee waste in a heating plant. The results are to be presented as different businesscases in which different biogas plants are compared with the reference case (heating plant),comparing costs and environmental impacts.There are two major environmental benefits from producing biogas; reduced carbon dioxideemissions from when fossile fule is replaced by carbon neutral biogas, and reduced emissions fromreturning digestate from the bio reactor to farmland instead of using industrial fertelizer.In order to determine the biogas potential in coffee waste, a couple of properties had to bedetermined in a laboratory. Properties such as the dry substance content, heating value, moisturecontent and ash content. The results show that 100 tons coffee waste could produce around 16 500Nm3 biogas which would contain 163 MWh.The biogas reactor and upgrade plant both need energy gas to function and uses around 14 MWh ofthe produced gas.

Att det föreligger ett problem kring bedömning i Idrott och Hälsa är ett tidigare känt problem. I denna studie tittar vi närmare på hur eleverna uppfattar och värderar olika kunskaper med avseende på teori och praktik i Idrott och Hälsa. Det granskas även vad eleverna tror att läraren värderar vid bedömning samt vad eleverna själva anser värdefullt att lära sig i kursen. Undersökningen är gjord med en enkätstudie på 187st gymnasieelever. Underlaget omfattar på pojkar, flickor, elever som läser studieförberedande program, elever som läser yrkesförberedande program, elever som motionerar regelbundet och de som inte gör det.

AbstractThis report intends through a case study to investigate if lightweight concrete isappropriate as main material in the outer wall of a seven storey residential building.A technical design is carried out in accordance with the definitions and requirementsfor passive houses, given by FEBY?s1 ?Demand specification for passive houses?.A literature review is also carried out for a comparison between regular bolt wall andlight weight concrete wall, with a focus on the safety of moisture.The lightweight concrete block used in the report is as a celblock produced by thecompany H+H Sweden AB.The methods used have resulted in compliance with requirements andrecommendations from authorities. Calculations of energy, noise and moisture riskassessment has been carried out.The work has resulted in the conclusion that the lightweight concrete itself is notable to isolate in the extent necessary to obtain chosen U-value of 0,1 W/m2 ° C,without getting to thick. Therefore additional insulation is needed. There are fewrelevant reference objects built with only light weight concrete.

Industrialization of construction is by some considered to be a solution to the building industry's problems about the lack of quality, high production costs, low productivity and poor environmental adaptation. Meanwhile, industrialized construction partly earned a bad reputation after the million housing program. As large-scale projects where promoted during this period, it worked very well to use the technique of construction elements. In the mid seventies though, criticism arose which claimed that the aesthetic qualities had been deprived in the corporates effort to make housing production as efficient as possible.Tyréns, Derome and CBBT (centre for building and housing in wood) cooperates in a development project to develop a building system for 4-8-storey buildings, consisting of three platforms: a technology platform, an IT platform and a processing platform. The technology platform consists of flexible, industrially built flat modules of wood and from this platform the subsystem stairwells, is broken out.

The present study examines a new production line of glue-laminated wood (glulam). The glulam is produced from non-planed boards of spruce, which also is convex, that is pressed together with high pressure during the gluing. According to a economic calculation, the material has a economical potential mainly on account of the absent planning. The study mainly found out that the shear strength of the material tolerated the demanded values in standard SS-EN 386, but the delaminating values did not. Since there are more areas to be studied around the material, the prospect to achieve the right delamination values is seen as positive..

The construction industry can contribute to a healthier sustainable community. A development that is going on right now is by using more prefabricated volume- and plan elements on the construction sites. Building with this method not only provides a benefit to the environment, but also reduces production rates by taking up to 80 percent less time to build. By building in this way it will be easier to recycle and keep all the material that otherwise would go to waste. Also by building inside a protected environment, the material retains its good quality.This report will take forward proposals on further development of prefabricated volume element of wood, by first presenting this construction methods advantages and disadvantages..

The government regulations for energy use in buildings will be tightened in the future. At the same time the interest in environmental classifications and certifications of buildings is increasing. This has meant a new situation for solar energy. The designs of solar heating systems are often based on experience and/or rules of thumb, rather than calculations and simulations. This thesis examines whether simulation tools, in this case Polysun, are useful in this work.