Globally, coastal ecosystems like mangrove forests, sea grass meadows and salt marshes are well known for their ability to capture and store atmospheric carbon effectively. In Sweden, there is still limited knowledge about local coastal ecosystems with similar functions, with alder swamp forests being an interesting example. Therefore, this study aimed to increase knowledge of the factors that can contribute to the potential carbon sequestering ability of alder swamps. Vegetation data and sediment samples were collected from a total of 37 sampling plots across four alder swamps in Bohusl?n on the Swedish west coast.

A pavement construction designed to cope with the different type of traffic loads; it is exposed to and at the same time it can resist the effect of the climate. A road structure consists of sub- and superstructure which is divided by a boundary known as terrace. During the construction of unbound layers (base course and sub-base course) in the superstructure, it is always ensured that the material meet the requirements for bearing capacity and the degree of compaction. These parameters are controlled by various laboratory tests and control methods. To obtain increased knowledge of the material and improve the quality of the compaction in the field, it is necessary to perform laboratory tests in order to determine material properties.A base course material 0/ 32 mm limestone from Gotland (Hejdeby) was investigated in this study.

Mechanical relays are more and more being replaced with semiconductortechnology. In this thesis it is investigated if and how the larger loads couldbe controlled by transistors. The main part of this work aims to create andverify a solution that can control the starter motor, as well as protect it incase of any failure. The different malfunctions that the solution protectsagainst is high current, too high peak current, low current, maximum cranktime and minimum cool off time. The timers also protect indirectly againstoverheating of the starter engine.The transistors used are BTS555, from Infineon.

Most of the city of Uppsala rests on postglacial clay with a varying content of sulphur. The sulphur occurs naturally in the clay in reduced form as sulphide and the clay is for that reason usually called ?sulphide clay?. Excavation during construction activities gives rise to large amounts of excavation material, of which the sulphide clay is a considerable part.When the clay is exposed to air and water, an oxidation of the sulphides occurs which may produce an acid leachate and the mobilisation of heavy metals bound in the clay or underlying material. The aim of the work has been to improve our understanding of the behaviour of sulphide clays and produce a basis for risk assessment in the future handling of excavation material with high sulphide content.

We know that more than 2/3 of insured dogs in Sweden are put to death by a veterinarian, which means that almost one third are killed in trauma, lost or die in some other way. An unknown number of these are killed by their owner with no veterinarian involved. This graduate thesis contains a specification of the laws that control euthanasia of dogs and cats in Sweden, and the veterinary medical basics on how to perform euthanasia. The objective is also to give understanding on how pet owners choose to put their animal to death and why, and to discuss whether that is an animal welfare problem. It is legal to kill dogs and cats by shooting, using a sporting gun, provided that it is done according to laws and regulations.

The form of my essay is that all human communication, can be seen as a practical knowledge, witch can be trained. I describe how I came in to a pedagogic activity, which is aimed to train people?s communicative ability in their working life and in school. This is made in the form of lectures, seminars and training program. In this essay, I even describe my personally background and what it was, that made me work with people outside the theatre.

Continuous improvement is one of five principles in General Motors ? Global Manufacturing System (GM-GMS). GM-GMS has been used by Saab Automobile AB since 2003 and is a central component for realisation of GM?s vision. Internal audits have discovered problems with one of the tools, practical problem solving (PPS), which needs to be improved.

For many years, the construction industry in Sweden has not developed much of an integral approach for design across disciplines. The sector?s impact on society, economics and environment is huge. To make the interactions within the construction industry more efficient, a relatively new concept called BIM (Building Information Modeling) has been introduced. The idea with BIM is that the different actors of the construction industry will work through intelligent CAD software, with common file formats and more cooperation between different actors during the various steps of the building and construction process.The technical consultancy company WSP Sweden is working actively to implement BIM within the frame of its activities.

Today there is an increasing market for businesses concerning horses, and since we are already running such establishments we sort of speak already have a finger in the pie. Due tothe increasing competition and demands, new and more practical constructions have become a necessity. In doing this project I wanted to make a comparison between having a stable integrated with a manege and having both constructions kept separate. I wanted to compare different layout and make an estimate of costs to see which solution would be less expensive and better with regard to working environment. I will further also deal with different ventilation-systems andlight transmissions.

During the last year in the Innovation Engineering Program, at Halmstad University, a degree project was performed that was carried out during Fall semester in 2006 and Spring semester 2007. The project was performed by two students in corporation with LIC Audio AB, a company in Stockholm. The degree project was meant to result in a communication aid for people with a cognitive handicap. The project focused on people suffering from dementia because of the expressed need within this group. This aid should first and foremost help in a conversation between a person with dementia and another person, like a relative or nursing home staff.

Scania is among the leading companies in the heavy vehicle industry. Scania also assemble engines for their trucks and buses, as well as to external marine and industrial applications. Wrongly assembled parts leads to quality problems, which makes it important to secure that the assembly is correct. To do this Design For Assembly (DFA) is used to describe how parts should become easier to assemble. Scania?s production unit for engine assembly has had a working method for DFA in the shape of a checklist, which is not used.

The purpose of this master thesis has been to find different solutions to the design of a headlamp with a cluster of three or possibly four high power LEDs (Light Emitting Diodes). During the work, two different problems have been considered; how to design a lens in order to shape the light beam in a desirable way, and how to design a cooling system which will lower the temperature of the LEDs as efficiently as possible, still taking into account the geometry set by the optical solution as well as other given geometries. The results presented in this thesis are partly the outcome of a literature study, but derive mainly from a number of tests and measurements made on two test rigs and one concept prototype..

The first browser war took place during the second half the 1990s, and Internet Explorer cameout as the winner over Netscape Navigator. Today a new browser war is being fought withmany competitors and the future is uncertain. The purpose of the thesis is to find out how theweb browser market has developed since the start of the previous conflict, and we ask ourselveshow it will continue to develop in the future. This is accomplished with, among otherthings, interviews, tests and already existing statistics. The thesis' conclusions shows that theweb browser market has developed in a positive way from several perspectives, both for theusers as well as for the web developers.

Shock absorber units play a key role in establishing the driving dynamics and performance of automobiles. Öhlins Racing has manufactured high-tech automotive shock absorbers for over 30 years. Öhlins Racing?s advanced technology has contributed to over 200 world championships in automobile racing. Öhlin?s manufacturing process has long utilized automated fluid filling equipment during the final shock absorber unit assembly stage. The filling process consists of vacuum pumping the shock absorber unit and subsequent transfer of fluid. Vacuum pumping is necessary to remove residual air from the shock absorber unit prior to initiating the liquid filling stage. The presence of undesirable gases drastically compromises the performance of a shock absorber. The filling degree, defined as the final ratio of air to oil, is determined by the specific filling protocol as well as the specific equipment utilized.The current investigation aims to develop a viable technique to accurately determine residual air content in shock absorber units. If the filling degree can be appropriately quantified for a specific manufacturing process, then the air/oil ratio may be quantitatively related to shock absorber performance. The utilized measurement method must be completely integrated into the manufacturing process to guarantee shock absorber performance specifications according to the manufacturer?s standards. By utilizing the measurement method developed in this work, the manufacturing process, manufacturing equipment and product specifications can all be tailored to provide improved filling conditions.The developed measurement method provides accurate quantification of the filling degree under a wide range of processing conditions. The method establishes the relative quantity of air in the shock absorber unit by performing in-situ compressibility tests. The fill ratio can be controlled and varied by manipulating the vacuum pressure exerted during the filling process. Performance tests, however, indicate no correlation between filling degree and unit performance..

April 28th 2010 the Swedish parliament decided that the combined teacher exam will be divided into four parts. This means that the education for preschool teachers and primary school teachers will have to be separated and future teachers will have to decide before their studies what ages they want to work with. To investigate if this could affect the quality of the choice I have interviewed 5 new teachers from the combined teachers program about what ages they wanted to teach before they began to study and what ages they wanted to teach after completed studies. I did this to see whether the choice was influenced by the educations or not. It turned out that all 5 had an idea of what ages they wanted to teach in before they began the educations and only one of my interviewees changed her mind during the studies.