The purpose of this report is to explore how modern technology can work againstolder craft techniques. The focus of the research will depend on what conditions areoptimal for cutting marquetry with laser technology. In my work I account for thehistorical background of the various techniques and then through own practical testsexamine whether the laser technology can complement the traditional techniques..

This essay is about the meeting of the pedagogic mission and the reality of the conditions in preschools. It is about the frustrations that I, as a pedagogue, experience when I cannot fulfill this mission. An example of this is working when understaffed.My purpose is the acknowledgment of two main areas of the curriculum: caring and learning. This essay demonstrates the diversity of the occupation and it ?s constant need of positioning.

?Mechanical debridment ? A studie in irrigation optimization? is a final thesis which was executed by Fredrick Ekman, in close collaboration with the other group member Mikael Johansson, during the spring 2012. The thesis was carried out through Karlstad University Faculty of Technology and Science in the study program of Innovation and Design Engineering (180 ECTS credits). The client of the project was Medilink AB located in Lindesberg, and the contact person was Nils-Erik Söderström, Chief Executive Officer. The project was supervised by lecturer, Lennart Wihk, and examined by lecturer and professor Fredrik Thuvander at Karlstad University.

In Sweden, the demand for bio energy has increased in recent years due to the current energy and climate debate. In 2008, the energy supply of Sweden was 612 TWh, biofuels accounted for 123 TWh of these. Stumps have been highlighted as a potential fuel in recent years and the Swedish Forest Agency expects a technically and biologically feasible potential of 20.7 TWh annually between 2010 and 2019. The idea of utilize stumps is not new. During the 19th century stumps were used for tar production and during the 70?s and 80?s attempts were made to use stumps in the pulp industry.

This thesis describes the planning and development of a volume meter of pine and spruce cones. The product was designed and developed for Stigsjö Skog och Frö AB in Härnösand. It was developed taking into account a number of requirements set by the supervisor David Zetterlund. The main requirements were that the volume measurement would be fast and give accurate results. These are two requirements that are missing in today's volume measuring method which is very problematic for the company.The plant was visited several times in Härnösand, mainly to discuss the generated concepts with the supervisor and perform tests on the prototype.

Foreseeing future changes in economic activity is of up most importance to a wide array of actors. The time lag in the presentation of official GDP statistics means that to somewhat accurately capture a tendency of where the business cycle is heading one need turn to qualitative sentiment indicators such as Purchasing Managers? Index (PMI) and official sentiment indicators for valuable clues. This thesis uses in-sample and out-of-sample methods to evaluate how well PMI and official Business Tendency Surveys (BTS) in Sweden and Denmark fair against the year-on-year growth rate of industrial production. Moreover, various Swedish regional sentiment indicators get examined and a case study of the indicator for the Öresund region is performed.

Tobii Technology AB is a global leading company in eye tracking. The technology is a part of acomputer screen called an eye tracker. It enables computers to follow eye movement whichfurther make it possible to control the computer by only using your eyes.The mission was to develop an arcade game for eye controlled games that Tobii can use in theirmarketing or as a tool when doing researches about the interest in the technology amongst gamecompanies. The product realization involved designing an innovative, functional and futuristiccase which gathered the existing hardware and software to build the final prototype. In order toattract users it was important to focus on the visual expressions.Initially, the project started off with an information retrieval which contained interviews, fieldstudies, tests and literature studies.

The purpose of this study was to describe senior nurses? expectations concerning how a digital information and communication technology systems (ICT) can contribute to the improvement of care leadership and how it can strengthen ties between the school's theoretical world and the practical clinical work-based training (WP) in nursing. The study has a descriptive design with a qualitative approach. The study involved seven leading care nurses. Data were collected through semi-structured interviews.

Today´s roofing of dwelling houses is a very time consuming procedure, which includes a lot of different steps on the construction site. Not only does it cost a lot of money, but often do problems with rot and mold occur in the attics of houses today. The use of prefabricated modules has seen a great breakthrough in the field of construction of dwelling houses; at least when it comes to foundations and walls, where this type of approach makes the construction process way more efficient. What no one previous has succeeded to develop is a corresponding system for roofs that meets the demands of a dwelling house. Accordingly the goal of PlusTak has been to come up with a proper module system for roofing of dwelling houses, where the roofing is completed to meet the demands of the Scandinavian market. During the project a lot of effort has been put into customer contacts and the usability of the product, as well in the manufacturing process as on the construction site. This development has gone hand in hand with several practical tests and tryouts.

The content of the following report is the summarized result of three students thesis at Blekinge Institute of Technology in co-operation with Water Jet Sweden AB. This report will give the reader a description of principles how to measure the abrasive mass flow in a waterjet cutting system. The work began with a visit to Water Jet Sweden AB to get a closer look at the problem. When the analysis of the problem was done the criteria were defined in the form of demands and desires. The main task of the criteria was to guide the search for the solution.

Linux is a growing operating system in embedded systems. Today, Linux is not only in heavy servers but also in cell phones, PDAs, cameras and other devices running on battery power. While current technology is more energy efficient, more and more technologies are implemented into a single unit resulting in an overall increase of power consumption.Low power consumption is an increasingly important feature of a system today. Lower power consumption means lower costs, less environmental impact, and longer life for applications that runs on batteries.This work compiles methods to reduce power consumption of Linux systems. The work includes examining whether the available opportunities are platform-specific or of a more general nature.

AbstractThe tests work is about the subject "synergism of steel and concrete."The construction sector is in a strong competition and the different companies in the PrefabMarket has ever tried to develop new design solutions that are efficient and environmentallyfriendly.The purpose of this report is to highlight different aspects of interaction and size up a columndimension and to examine its efficiency and load capacity as Eurocode 3 and Eurocode 4. A sizing chart that describes the relationship between the torque and normal force shouldalso be made of the interaction . .

The purpose of this project is to analyze earthing systems for houses. By practical measurements and theoretical analyzes consequences of possible faults, that can occur within the facility and in the low-voltage distribution network, is illustrated.  The reason for this project is that nowadays one has to arrange with a main equipotential bonding system for buildings. Apart from that, if necessary, bathrooms must be provided with a supplementary equipotential bonding system.The practical measurements verify that potential differences in facilities may be due to voltage drops in the PEN conductor between the origin of the electrical installation and the power transformer.Based on the theoretical analyzes of possible faults, it is considered that the requirement for  supplementary equipotential bonding systems for bathrooms in most cases can be questioned, when basic insulation, fault protection, residual current devise and main equipotential bonding system already provides an adequate level of protection.A PEN conductor loss may result in a situation where metallic parts attached to the equipotential bonding system starts working as earth electrodes. Equipotential bonding system may also increase the incidence of stray currents. If TN-C-S systems is provided with a local connection to earth a redundant system against PEN conductor loss is obtained.

Abstract Title: Enabling Smart Research and Development through Knowledge Conversation Seminar date: 2005-06-08 Course: Master thesis in business administration, 10 Swedish credits (15 ECTS) Authors: Andreas Johnsson, Johan Rosendahl Advisors: Lars Bengtsson Key words: Knowledge management, Knowledge conversation, Research and development, Ba, Trelleborg Purpose: The purpose of the thesis is to create a model that shows how knowledge management aimed at research and development processes can be used and how the theoretical fields can be connected. Methodology: The thesis is based on abductive perspective where empirical and theoretical material has been mixed to create a foundation for the analysis. Theoretical perspectives: Theories concerning knowledge management and research and development have primarily been used. These have been complemented with material about team structures and incentive systems. Empirical foundation: The empirical material is based on semi structured, mostly qualitative interviews and strictly quantitative inquiries performed at Industrial Hose within the Trelleborg group.

This study where designed to investigate if there are any positive relationship between the extent of physical activity during adolescent's leisure time and the academic performance, and also if there are any negative relationship between the academic performance and the time spent in front of the television or computers. Another part of the study tried to find out if physical activity has a direct and immediate influence on the performance in school. 91 pupils (51 girls and 40 boys) in the 8:th year of the Swedish primary school, from three different schools participated in the study. All 91 pupils first responded to a questionnaire concerning there activities in leisure time. They where then tested in a mathematical test and the results where compared with the extent of physical activity and TV/computer time they had stated in the questionnaire.