At the Division of Electricity at Uppsala University there is an experimental rig forhydroelectric generators. The experimental rig?s vital part is a 12-pole synchronousmachine, whose electrical characterizing parameters (resistances, inductances andtime constants) are unknown. The aim of this thesis is to characterize the machine inits current state by perform a Standstill Frequency Response (SSFR) test. From theanalysis of the measurement data, which is a part of the test, a set of basic parametershave been received.

Micronic Laser Systems AB produces and develops machines for the photo mask production market. One of their products is the Omega machine which exposes photo masks using 5 laser beams simultaneously. It is important that the distance between the each laser beam, the x-separation, is the same. The x-separation is today measured by exposing a photo mask with a certain pattern and thereafter measured with a metrology system. This takes to much time and it is desired to find a faster method to measure the x-separation without loosing precision.The task for this master thesis is to improve an existing measurement method which uses a calibration mask.

New technology makes it possible to remotely measure all consumers in a power network onan hourly basis and store the values in a database.This thesis work describes the conversion process between automatic meter reading systemMActor and calculation software Xpower.Then the possible differences between calculations of power networks using load curves incombination with a yearly estimate of consumption and calculations using hourly measuredvalues is examined.The result of the comparison shows that, for the power network under inspection, nosignificant difference could be noticed. This does not mean that calculations using hourlymeasured values would be unnecessary. I believe that in a near future calculations using hourmeasurements will be the primary choice for many power companies to whom technology isavailable.Also some basic calculations of fundamental power network parameters, such as power factorand loses, are presented using hourly measured distribution transformers in combinations withits hourly measured loads.The report is written in Swedish.

In today´s forestry, assessments of needs for thinning are based on basal area measurements. This is an indirect measurement. The approach and the developed assessment tables are based on an assumed production forest, which implies that management proposals in stands that deviate from the basic model may be misleading. Since Walter Bitterlich in 1948 launched the idea of the relascope, several modifications have been developed for different purposes. In common is that all are based on a certain angle measurement principle.

The mining company LKAB extracts iron ore in three areas in the north of Sweden, Kiruna, Malmberget and Svappavaara. The iron ore is refined and in the pelletizing plants the material is rolled to finished pellet product. The different steps of pelletizing plants causes among other things emissions to the air. It occurs occasionally stops in the production and the emissions are vented via an emergency chimney without purification. The aim for this work is to look into how LKAB may improve their monitoring of air emissions and control of ambient air quality and the analysis methods which are suitable for measuring.

The purpose of this thesis is to identify power structures and instruments of power within the Jehovah?s witnesses and investigate how they affect the baptized youths baptized within the organization. The material consists of qualitative in-depth interviews and is analyzed with Foucault's theories of power. The results show that the participants have a very strict relationship to the rules of the congregation and also that they take great care in observing these rules carefully. It becomes evident that young members are exposed to disciplinary measures from the organization.

The purpose of this thesis is to identify the factors that drive efficiency and effectiveness in technical development projects performed at A?F?s department of product development. In addition to identifying and analyzing these factors, the thesis also analyzes what needs to be taken in to account in order to implement a measurement system that is able to both monitor and control the identified factors.The thesis has been performed in a qualitative manner. It is based on interviews with people from several different technological companies, within different lines of business, all of which are customers to A?F?s department of product development.The results show that there are seven critical factors for project efficiency and effectiveness.

Most of the portable electronic devices use a battery as a primary power source. Nowadays, when the applications are becoming smaller and smaller and more power efficient, the designer needs to concentrate more on reducing power consumption, using secondary power sources and introducing power storage devices. Multiple power source availability and a power storage device on the board will make the applications much more useful and efficient in everyday use. This thesis proposes a power supply unit (PSU) for wireless sensor platforms which is capable of supplying a sensor node with energy from multiple sources, as well as status information from the PSU. Present power storage devices, like electric double-layer capacitors (EDLCs) and batteries, have become more and more common as their characteristics have developed.

Earlier models that measured de facto harmonization of international accounting mainly used indices and other related statistical models. Those approaches do not account for the relative importance of individual balance sheet items or expense items being harmonized. This paper therefore proposes a different approach using Runsten?s (1998) permanent measurement bias model. That way it is possible to quantify the harmonization process by accounting for differences among companies.

The purpose of this thesis is to identify power structures and instruments of power within the Jehovah?s witnesses and investigate how they affect the baptized youths baptized within the organization. The material consists of qualitative in-depth interviews and is analyzed with Foucault's theories of power. The results show that the participants have a very strict relationship to the rules of the congregation and also that they take great care in observing these rules carefully. It becomes evident that young members are exposed to disciplinary measures from the organization.

This thesis examines the power of developing countries within the World Trade Organization (WTO). The research question is if there is a change in the power relations between developing countries and developed countries from the establishment of the WTO in 1995 and until mid 2006, and if so, why this change is taking place? The thesis has its theoretical starting-point within regime theory and views it from a critical theoretical perspective. A multidimensional why of dealing with the concept of power is being used to answer if there is a change in the power relations? The conclusion is that there is a small change in the power relations and that the developing countries are gaining more, but limited power.

The interest for wind power has increased in Sweden. Northern Sweden is especially interesting due to that a new wind resource map shows that there are areas in northern Sweden that have more potential for wind power than what have been known before. Therefore E.ON Vind is interested in finding out if, and where, there are suitable places for establishment of wind power in northern Sweden. The purpose of this master thesis is therefore to perform an inventory of northern Sweden for suitable places for wind power. The master thesis is performed at E.ON Vinds office at Vasagatan in Stockholm.

The purpose of this study was to increase the level of knowledge in the field of Environmental Impact Assessment (EIA) for wind power. The study includes six wind power farms in the County of Västerbotten in northern Sweden. The main questions were: What are the real dimensions of roadways and land claims for both roads and wind power turbines? How do those dimensions correlate with the dimensions stated in the EIA? Are there any differences in values of the dimensions between the wind power farms that are included in this study? The width of the roadways and the land claims for both roads and wind turbines in wind power farms were examined on site. The results from the examinations were compared with the dimensions available in the EIA for each wind power farm.

AbstractAuthor: Ellinor Carlsson and Renate HöjdTitle: "When you can make a difference and when you can´t" the power relation between psychiatricdisability social worker and client [translated title]Supervisor: Eva SkogmanAssessor: Norma MontesinoOne branch of the social works field of research is the relation between social worker andclient. Research has shown that the power and inequality in the relation between helper andperson being helped is needed for the helper to provide help. Power is often mentioned undernegative circumstances such as social workers abuse of their power position, violating theperson being helped. However, Michel Foucault suggests that power is something neutral thatexists in every social interaction. The negative aspects of power are effects of the parties notreaching agreement.

In the electronic industrials, power control of AC motors is commonly used. For example power control of a washing machine motor, a vacuum cleaner motor or a coffee machine motor. The company Rejlers Ingenjörer AB has many projects where power control of AC motors is included. A prototype card for this task can save time and money for the company in the future and this is the reason for this thesis.The motors are power controlled by a TRIAC and control of the trigging pulses to the TRIAC. This card is modularly built and can easily be adapted for future projects where the power control of AC motors are included.The prototype card can be used as a subsystem in a larger electronics projects or as it is in lab environment for testing and evaluating new motors..