Working with health-management has become something most organizations would describe as essential for being legitimate today. The aim of this thesis is to investigate how this subject is handled in an existing company and how this work is percieved by the employees in the organization. Due to the fact that limited research has been conducted on this issue, we see this thesis as a potential for increasing the understanding of how health management is articulated in practice. Our results show that health management in our studied organization is far reaching in comparison with most organizations, but has room for improvement according to the Integral Theory. The consequence of differences in perceptions between management and employees could result in that health management does not become an integral part of the company and its daily operations to the potential extent..

 SammanfattningKravhanteringsprocessen är en av de viktigaste faserna vid utvecklandet av ett IT-system. Kravhantering är alltså grundläggande för att utveckla ett stabilt system som uppfyller beställarens önskemål. Med en väl utförd kravhantering som grund får man ett system som är fritt från bristfälliga fel, utvecklandet av systemet går även till på ett effektivare sätt. Vid byggandet av ett system eftersträvar man alltid en framgångsrik mjukvara. Kravhantering ses som den viktigaste faktorn vid utvecklandet av ett IT-system.Föreliggande studie genomförs som en litteraturstudie där undersöks vilka brister som är vanligt förekommande under kravhanteringsprocessen.

 With the increases in fuel costs due to the depletion of the world oil reserves and the increase of greenhouse gasses as a consequence to using oil as a fuel many companies are looking to new and innovative ways to power their aircraft. One of these new ways to power an aircraft is using fuel cells powered using hydrogen and oxygen, thus producing nothing but water vapour and small amounts of nitrogen dioxide as well as trace amounts of other emissions. Both Boeing (1) and Politecnico di Torino (2) have shown that it is possible to build an all-electric aircraft powered by fuel cells. Both flights used small, two-seater aircraft and a constant between them was the loss of the co-pilot seat due to weight and lack of space. As this paper will deal with a commercial aircraft a primary concern is the cargo and passenger capacity and whatever impact switching propulsion system has on these.

The increasing public concern regarding the government?s priorities in spending public resources puts pressure on public organisations to address quality issues in their practice. In United Kingdom both BRTF (Better Regulation Task Force) (BIS, 2005b) and the Hampton report (BIS, 2005a) highlighted management and quality problems in public organisations in UK. These reports revealed obstacles within institutions? intent to offer recommendations and appropriate solutions for agencies working with legal enforcement and control.

Background: It has been shown that EDI can yield positive effects within companies. Which effects are possible for a company to direct assign to the introduction of EDI and is it possible to estimate the total effect.Purpose: The purpose of this study is to estimate and analyze the effects of using EDI in electronic business. We also want to contribute with a model for measure and estimate the effects of EDI.Accomplishment: We have studied literature concering EDI and realized a preliminary studie in form of interviews with experts to establish deeper knowledge of EDI. We have also tried to estimate the effects obtained in companies in three different businesses, power, government and transport industry.Result: To obtain as good effects as possible it is important that the co- oporation is built on trust and engagement. Before implementing the EDI-system a thorough overhaul of the processes in the company should be done, involving both the top managers and the staff.

Historically transformers with system earth equipment have been modeled as open circuits in zero sequence. This approximation has been satisfying, but lately it has been discovered that equipment on one side of the transformer have responded to faults that occurred at the other side. Most of these problems took place when the majority of the system on the secondary side of the transformer contained cables. These findings have led to questioning whether or not the former model of the transformer in zero sequence is correct. This report investigates if it is necessary to represent the transformer in zero sequence in another way than it is usually done today.

Wind power is one of the sources of renewable energy which has to be developed further in order to lessen our dependence on non renewable sources of energy. It's mainly oil and coal which have to be replaced by green energy. Wind power is already established in many countries, for example Germany, The United States of America and Denmark but it has to be continually developed and expanded to meet the needs of the growing energy consumption in the world. During the last few years many types of small wind turbines have appeared on the market. These small wind turbines are an alternative to the big wind turbines or power generators which demand huge sums of investment money.A new target group can now buy the small wind turbines in order to cover their own usage of electricity.

The exhaust arrangement on a Scania V8 consists of one manifold at each bank connected to a twin entry turbine (8-2-2). A study in GT-Power has shown improved performance and reduced cylinder to cylinder variations using two manifolds at each bank in combination with a single entry turbine (8-4-1). This thesis work analyses the difference in performance shown in simulation and verify it by engine test.The initial work was focused on simulation in GT-Power. Investigating how exhaust manifold volume and pulses effects the turbine efficiency and the mean effective pressure during the gas exchange. To verify GT-Power simulations four engine tests with different exhaust arrangement have been made.The results from GT-Power simulation indicate that a larger exhaust volume improve the turbine efficiency.

Fortum has in a pilot project installed metering equipment with wireless communication in secondary substations in Stockholm. So far, the collected data are used only in specific projects.This master thesis was carried out at Fortum Distribution AB in Stockholm during 2013. The purpose of this study is to simplify and enhance the use of data in for example network planning process, by giving suggestions on how data can be managed and giving examples of analyzes that collected data can be used for.The electricity meter which Fortum has installed is a EDMI-Mk10A which is set to measure max/average/min values with a one hour time resolution of the following parameters: voltage (per phase), current (per phase) andactive power and active and reactive energy.In order to analyze the collected data an analysis tool is required. During this thesis two customized tools in Microsoft Excel have been developed, one for sorting data and one for analyzing.One aim of the thesis is to show examples of what collected measurement data can be used for. This work shows an example of analysis of active power, power factor, voltage, occurrence of interrupts and the relationship between outdoor temperature and power.This master thesis has among others resulted in the following advice: Expand the number of secondary substations with measuring equipment.

In 1983 Sweden passed a law stating that all limited liability companies are to be included into a mandatory auditing system. According to the EEC, courts fourth amendment, each country has the right to decide whether to exclude a mandatory auditing system for smaller companies. Audit reports in Sweden are considered to be very important for the bank crediting system. Should this be eliminated, it would be more difficult for banks to trust an audit. The significance of calculated audits is questioned in regards to the banks accrediting system.

The aim of this study was to investigate how the process of implementing a quality management system for food safety was handled in four different food producing companies in Sweden. The aim was also to analyze what difficulties the companies face and the possibilities that arise when certified. Furthermore, the reason for implementation was discussed as well as the main expectations on the certificate. Implementing a quality management system is a good way of ensuring the quality and hygiene of the food production and it also increases the traceability of food products through the whole food chain. A food safety standard provides a method of preventing problems and crisis and it can also help to handle requirements from authorities, the market and others.

The author of this report has created a Web-based invoice system and CRM at therequest of the company Webhouse.se. The purpose of the System is to makeeveryday tasks in the company easier. The system also needed to prevent mistakesand errors by managing orders and invoices.The system has been created with the company?s requests in focus. During thedevelopment of the system information security and interaction design have beenimportant aspects that have been taken into consideration.The system has been created using techniques such as PHP and MYSQL.

Denna undersökning handlar om hur användandet av CRM-system (Customer Relationship Management) påverkar företag och dess kundrelationer. Forskningen om detta visar att CRM-system kan ge stora fördelar för både kunderna, företaget och relationerna där emellan. Men det finns många delar som påverkar hur mycket ett CRM-system förändrar relationerna mellan företag och deras kunder. Resultatet från denna undersökning kan vara av intresse för företag som går i tankarna att skaffa ett CRM-system eller förnya det som dem redan har. Vilket leder fram till vår problemfråga: Hur påverkar CRM-system företag och dess kundrelationer?Syftet med uppsatsen är att beskriva och analysera hur ett CRM-system påverkar företag och dess kundrelationer.Undersökningen baseras på en teoriram som ger en inblick i vad relationer är och vilken betydelse kundrelationer har för företag, även behandlas CRM-system och dess effekter på företag.

 Detta är endast en del av ett stort arbete, på grund av omständigheterna (till exempel möjligheten att publicera en power point) har vi varit tvungna att begränsa vår publikation till lärarhandledningen. Det finns också en elevutgåva, power point-presentation samt ett prov som inte publiceras. För att ta del av dessa krävs möjlighet att komma åt Biologi C för lärares kurswebb Vt-2008 på Södertörns högskolas intranät. .