Emwiro Vibe is a complete system for seismic measurements. The functionality of the system was before the completion of this project handled using a software contruction based on a state machine. Emwitech, the company developing Emwiro Vibe, expressed a desire to replace this solution with a real-time operating system (RTOS). The project consisted of two parts. Firstly the existing software was studied, available RTOSes was evaluated, and the RTOS most suitable for the application was selected.

Emwiro Vibe is a complete system for seismic measurements. The functionality of the system was before the completion of this project handled using a software contruction based on a state machine. Emwitech, the company developing Emwiro Vibe, expressed a desire to replace this solution with a real-time operating system (RTOS). The project consisted of two parts. Firstly the existing software was studied, available RTOSes was evaluated, and the RTOS most suitable for the application was selected.

The main purpose of this project was to make a survey of the steam and electricity consumption at Akzo Nobel Functional Chemistry AB and give suggestions of how to minimize them. These three different areas were focused on. First to make a survey of all the most important consumers, second to find the electricity consumption of the air compressors and the amount of waste heat produced from them. The third area was to calculate a model of how much fresh water that is used during a cooling sequence in the water based heating/cooling system of the reactors and give a suggestion of a suitable reuse for this water.The main result is a total survey of the energy consumption in steam and electricity. The survey shows that the second largest group after drying is heating of ventilation which gives big potentials of reducing the total steam consumption if there is a way of being self supporting in ventilation heat.

The goal of this paper is to find out how solar cells can improve energy efficiency on-board M/S Sydfart. The paper is based on a number of energy measurements on board the M/S Sydfart. The solar surface is calculated by measuring the available space for installing solar panels. Global radiation data is taken from STRÅNG's database, the data is then used to calculate the theoretical power produced by the solar cells. Energy efficiency is analysed in two ways.

Approximately 4000-5000 hectares, of SCA´s forest land area in Västerbotten, are in need of pre-commercial thinning (PCT) every year. Within the management district, the areas annually treated with PCT must increase, in order to decrease the area with an urgent need for PCT. This can be done by employing more forest workers or entrepreneurs, by mechanized PCT or by an extended season for PCT. Positive experiences from a private forest owner, who started to carry out PCT when the first snow came and then continued for several months, gave an idea to investigate the possibilities to prolong the season of PCT. The purpose of this experiment was to compare PCT carried out when there was snow on the ground with PCT performed when there was no snow on the ground.

Som tandhygienist är det mycket intressant att studera karies-epidemiologiska undersökningar på både nationell och internationell nivå. Syftet med denna litteraturstudie är att beskriva och jämföra kariesstatus (DMFT) hos 12-åringar i Sverige och Irak, och några av de faktorer som kan påverka DMFT komponenternas roll och inverkan. För att besvara syftet användes information från litteratur och tidskrifter samt WHO:s databas om länderna. Resultatet visar att DMFT för 12-åringar i Irak var 1.7 (2003) och i Sverige 1.0 (2005). DT-komponenten, d.v.s. obehandlad karies, var hög hos irakiska barn medan FT- komponenten var hög för danska barn (inga data tillgängliga för Sverige).

Since a few years back television has been on a verge of an enormous digital change. Web-TV is now growing at an incredible rate and is said to completely change the way we consume TV. The purpose of this essay is to determine and gain an understanding of how representatives of the broadcast industry looks at the phenomenon of web-TV and especially the different kinds of online video services and how they believe this will affect the television. Methods used are qualitative interviews which we compared with previous studies on the subject and acknowledged communication theories. The respondents were people with good insight and understanding of the media and TV industry.

This report aims to examine the design of a passive house. The design addresses the selection ofmaterial, sizing and selection of both building services systems and building technical features suchas load-bearing framework and moisture control. Interior layout is designed for a family of twoadults and one child.A big part of the report is devoted to an in-depth comparison of three different wall constructions ofpassive house standard. The structures that have been compared are a lightweight timber structure, aheavier concrete structure and a sandwich wall of the brand Weber Leca. The report covers variousaspects such as air flow, wall thickness, the risks associated with the construction, U-value, thermalbridges, Power consumption, price, and assembly costs.

Background: The recent years in the Swedish Fast Moving Consumer Goods industry have been characterized by a palpable shift in power balance, favouring the retailers. Since the shift in power balance has strengthened the negotiation position of the retailers, the suppliers now have to, to a greater extent than before, accommodate to the retailers? goals, whether they be financial or strategic. Purpose: The aim of this study was to investigate how this recent power shift has affected the relationships of suppliers and retailers. This development has resulted in the rather new and unexplored area of retailer value, which this study further aimed to explore.

This report aims to examine the design of a passive house. The design addresses the selection ofmaterial, sizing and selection of both building services systems and building technical features suchas load-bearing framework and moisture control. Interior layout is designed for a family of twoadults and one child.A big part of the report is devoted to an in-depth comparison of three different wall constructions ofpassive house standard. The structures that have been compared are a lightweight timber structure, aheavier concrete structure and a sandwich wall of the brand Weber Leca. The report covers variousaspects such as air flow, wall thickness, the risks associated with the construction, U-value, thermalbridges, Power consumption, price, and assembly costs.

The consumer society exploits the earth?s resources more than the earth itself has capability to produce. This over-consumption causes a mass production of products, which mean that more greenhouse gases are being emitted to the atmosphere. This is one of the reasons why the earth?s temperature is rising, where the result of it is worldwide disasters.

We are more aware than ever about our impact on the common environment and the world's population. Consumption awareness can be one way to take social and environmental responsibility. This study aims to examine young adults' (19-30 years) attitudes toward consumption awareness in Sweden. Consumption awareness is treated in this study as the consumption of environmental and fair-trade labeled products that have been certified of a third party. The study is limited to everyday commodities, which in this case is groceries, household consumables and clothing.

Regulations on the exhaust emissions of HD-diesel engines are becoming more and more stringent, and therefore, emission after-treatment systems are commonly used. These systems rely on catalytic conversion of NOx,CO , and HC emissions, and are thus dependant on temperature. At low load of the engine, exhaust temperatures are not sufficient for the after-treatment components. Therefore, means to increase the exhaust temperature while maintaining low emissions and fuel consumption are needed.The focus of this project has been to develop strategies for the lift profiles of exhaust and intake valves in the engine, with the goal to raise exhaust temperature in combination with low emissions and fuel consumption. The strategies have been tested in a single-cylinder research engine equipped with a hydraulic variable valve actuation system.

ABSTRACTUniversity: Växjö University, school of social science, department of political scienceLevel: Bachelor?s thesis in political scienceTitle: SHIFTING BALANCE OF POWER? ? an analyze of the new EU-treaty?s consequences for the EC-court.Academic adviser: Associate professor Stefan HöjelidAuthor: Magnus NordahlThis study focuses on the increased role of the European Court of Justice through the establishment of a Constitution for Europe and its impact on the balance of power, both horizontal and vertical.To do this, the study takes its aims from the research problem, formulated as follows:Does the establishment of a constitution for Europe contribute to an increased role for the European Court of Justice and does it create a more legible horizontal and vertical division of power?To reach the relevant analyses and conclusions two precise questions are presented as well as an analytical model. The precise questions are:? Which are the relevant contributions for the balance of power from a perspective of juridification in the new EU-treaty?? What impacts do those contributions have on the so called ?European federalism??The theoretical perspective of this study is rooted in the concept of federalism with special emphasizes on constitution and sovereignty as well as a part about the process of juridification. Along with the presented analytical model consisting of a horizontal and vertical division of power, the empirical material is presented with focus on the new EU-treaty about a constitution for Europe and the European Court of Justice.

This report aims to examine the design of a passive house. The design addresses the selection ofmaterial, sizing and selection of both building services systems and building technical features suchas load-bearing framework and moisture control. Interior layout is designed for a family of twoadults and one child.A big part of the report is devoted to an in-depth comparison of three different wall constructions ofpassive house standard. The structures that have been compared are a lightweight timber structure, aheavier concrete structure and a sandwich wall of the brand Weber Leca. The report covers variousaspects such as air flow, wall thickness, the risks associated with the construction, U-value, thermalbridges, Power consumption, price, and assembly costs.