Value stream mapping is a tool that is frequently used by many different companies. It is a great tool used to achieve the work that follows the theories of lean production. The tool is used, however, only frequent on the factory floor and the method is also designed based on this type of use.An interest of applying the method on administrative parts of the company has occurred lately. Administrative parts of the company refers to the part that does all the planning such as purchasing, receiving orders, customer contact, contact with factory floor and other work that is made around the actual manufacturing. But the knowledge about applying value stream mapping on the planning part of the company is lacking because the method is relatively new.In this work, a comparison is made between the introduction of value stream analysis on production and planning.

In agricultural educations you learn to use different economic planning tools, as basis for decision. The purpose and goal of this work has been to find out if economic planning tools are used by the farmers in Sweden. We choose to do an investigation through personal interviews, and used an inquiry to get as equivalent answers as possible from the farmers. This work contains a literature study with relevant facts about the questions that is brought up in the inquiry. This study of literature explains shortly some different calculation methods and bases for decision. It also contains useable information that is important to know before an investment. The questions that are asked to the farmers have focused on the use of calculation methods and economical planning tools.

At Uppsala university scientists have during the last years developed and built wave energy converters. This project is called "Lysekilsprojektet". The development has come so far that they are currently investigating how to gain profit in a mass production. For that reason they want to automate as many steps in the production as possible.The winding of the stator is one part that is being automated using industry robots. The stator is cable wound unlike many other generators.

A growing number of companies realise that to achieve their environmental goals and satisfy stakeholder expectations, they need to look beyond their own facilities and to involve their suppliers in environmental initiatives. A life cycle approach means that the production system should be optimised as whole, across national boarders and individual organisations taking part all the way from extraction to disposal. This study is a Life Cycle Inventory of resources used when producing a piece of cotton garment and the method is based on the standardisation series of ISO 14040-43. The area of study, Tamil Nadu the most southern state of India, accounts for more than 90% of India?s knitwear exports to Western Europe.

Peat  lands  are  a  great  potential  resource  for  increased  forest  growth  in  Sweden, there  are  approximately  6.5  million  hectares  of  peat  lands,  whereof  around  70% produce less wood than one m3sk/ha and year and are therefore classed as forest waste  land.  There  are  over  200  000  hectares  of  peat  land  that  is  already  drained and  wooded,  and  that may  be  suitable  for  fertilization.  Forest  production  on  peat soils  usually  requires  drainage  and  fertilization.  Dewatering  requires  ditching  the area, so that the roots can have access to oxygen. Nitrogen is often abundant in the peat but other nutrients; especially potassium is in short supply. The  purpose  of  this  work  was  to examine  the effects  of  potassium  fertilization  on the  growth  of  spruces  that  were  planted  on  drained  peat  land  and  how  different amount of fertilizers affects the growth. Potassium deficiency is strongly growth inhibiting, since potassium is important for substance  transport  in  the  tree.  Potassium  is  also  important  for  the  carbohydrate formation, and because increasing the sugar content of the cells constitutes a lower freezing temperature does potassium availability in the soil play a major role in the winter  resistance  of  many  species.  Potassium  is  not  found  in  any  organic compounds in the tree, but is present in cell and tissue fluids. A fertilization trial was started in 1978 in Siljansfors Experimental Forest. The plots in the experiment were fertilized with different amounts of potassium and one plot was  left  without  fertilization.  All  plots  that  were  fertilized  with  potassium  grew considerably better than the unfertilized plot. The difference in production between the unfertilized plot and the plot that received the most potassium was 7.2 m3sk/ha and year. The unfertilized plot can still be classified as waste land. The theoretical production capacity was estimated using a Swedish system for site quality  estimation  of  wetlands  after  ditching  (dikningsbonitering).  The  plot  with most  potassium  produced  after  fertilizationaproximately  in  level  with  theoretical estimations.  Key  words:  Peat  land,  Fertilization,  Ditching,  Growth,  site  quality..

The City of Stockholm has decided to invest in renewable energy and especially in photovoltaics. The objective of this thesis is to investigate the photovoltaic potential on roof areas that the city possesses and to further investigate some buildings of the Property Management Department. The thesis also compares some existing photovoltaic plants with the solar irradiance map which shows available roof area on each building in Stockholm. The report ends with a literature study about the climate impact and greenhouse gas emissions of photovoltaic.The total available roof area suitable for photovoltaic plants is estimated to 700 000 m2, with a potential electricity production of 110 GWh per year. This corresponds to 17 % of the City of Stockholm?s yearly electricity consumption.

Housing construction very close to the lake Mälaren has become very popular today. One potential problem with these houses is the influence of the sea climate. Unprotected buildings are affected by strong winds and precipitation. So for that reason, it is very important to make an accurate climate investigation and use it for decision-making during the planning of the new settlement.It is very important with a good moisture protection regarding pelting rain, that is the combination of wind and rain. This is more important for buildings close to a lake, as this location normally means a higher exposure to wind.

AbstractHeadline: Young trouble and teenage love (Fjortisgrubbel och tonårskärlek)Number of pages: 37Author: Annika IlmoniTutor: Amelie HössjerCourse: Media and communication CPeriod: Autumn 2007University: Division of Media and Communication, Department of Information Science, Uppsala UniversityPurpose/aim: The purpose of the work was to produce a comparing study of two Swedish teenage films from different periods of time, 1970 and 2005. An analysis was to be made of how love between teenagers as well as the heterosexual relationship in general was depicted in each of the films and further investigate the gender construction in both films.Material/method: With the intention of narrowing down the complexity and make the evaluation more lucid 5 scenes from each film were used for comparison, these were chosen through the Anglo Saxon dramaturgy. To make the scenes more comparable 4 factors were used for analysis in each scene, these were: clothes, recreational activities, behaviour and environment. Beside the above given factors the heterosexual relationship were analysed and compared in each of the scenes through the theory of dominance in dialogue.Main results: The gender construction occurs obliviously in the older film from 1970 while taking place in a more conscious way in the film from 2005. Further on the heterosexual relationship is perpetually depicted in the 70?s film with a submissive girl and predominant boy, the same dominance is easily seen in the more recent film but with a higher rate of equality as the girl is portrayed as the dominant character in almost half of all scenes.

Cows are ruminants and they need fibers in their feed and sufficient eating time to function psychologically and physiologically. Many of our cows don?t get enough forage and too much concentrates, which given in the wrong way may cause health and behavior problems. Too much concentrates at once makes the pH in the rumen sink and this may cause decreased fiber utilization since the microbes in the rumen are negatively affected by this. The cow may also get serious problems such as laminitis and abomasal dislocation.

AB Sandvik Cormorant?s production unit in Gimo has identified a need to examinethe handling of products between operations with the purpose of generatingproposals of improvement for the product handling.The aim of this project is to study the existing manufacturing process and givesuggestions for improvement. The proposals should reduce the manual handling ofproducts, decrease the risk of damaging the products during the manufacturing andform a basis for increased traceability. Based on a mapping of the manufacturingprocess and the problem description, a specification of requirements has beencomposed.The mapping of the manufacturing process suggests that a change of the currentsystem is required. The company is recommended to decide how the producthandling between operations should be performed as guidelines for the productionteam.

De senaste fem åren har tågresandet ökat med 28 procent. Den ökade trafiken har lett till ett högt utnyttjande av anläggningar och fordon. Det har i sin tur medfört stora problem med punktligheten av tågtrafiken. För att matcha den ökande trafiken på Sveriges järnvägar ska detta examensarbete undersöka om man kan implementera Lean produktion för Banverkets byte av spårväxlar för att göra dessa mer effektiva. För att ta reda på vad Lean produktion egentligen är gjordes en litteraturstudie.

Cooling down the indoor air can be done in several ways. One way is desiccantcooling which will be used at the Stockholm Arena. This method is used in airhandling units that use temperature changes and moisture fluctuations in the air. Oneof the steps is to add heat during the cooling process in order to reduce the relativehumidity of the exhaust air. The air passes thru an adsorptions rotor which thenabsorbs moisture from the supply air.

The emergency medical care in Sweden has been under persistent debate, due to factors such as long waiting hours, inefficient patient flow, and understaffed departments. In an effort to meet the critique and with a willingness to improve the problems, an increasing amount of emergency clinics are adopting theories and models within Lean. Positive outcomes are evident, there has been some criticism directed towards Lean. Among these is the argument that in order for Lean to be successful it needs to be used within standardized and foreseeable processes, and that it therefore only is applicable to those kind of processes found within industrial production. This prompted the question of whether Lean was a suitable strategy within emergency medical care, considering the large variation of patients and non-foreseeable processes that in fact share little resemblance to that of industrial production.

I contacted the production company Salmonfox in the hope that they would have any projects that they needed help with. It showed that Salmonfox just started up an old project that they needed to complete. They wanted my help to edit some trailers and one crowdfundingfilm for the short film called, Captain Sweden (Kapten Sverige). Salmonfox are hopefully going to use the different trailers and crowdfundingfilm to promote the short film and get help with the funding to make a feature. The project began with a pilot study in which I made a time plan and a requirements plan, where the different requirements were set.

The purpose of this master thesis is to investigate different types of measures for making buildings more energy efficient and to estimate their profitability. The calculations were performed with the building simulation program VIP+ and the evaluation of the profitability with the life cycle cost method. Furthermore, it was examined how losses in the distribution of secondary systems of district heating can be avoided. Options to replace district heating with a local district heating system based on bio-energy have been investigated. The possibilities of achieving more efficient thermal energy consumption and production for the chosen estate were also examined.The object of the study has been a residential estate with 133 detached houses in Uppsala, built in 1974.