AbstractThe purpose of this essay was to determent if the authors? idea to replace a personal trainer with a training program, which is provided by software, is viable and if there is a market for such a product. The method that was used, included eight people who enrolled in a training program which were designed by the authors in Microsoft excel. The programs were based on principals of periodization, and included the phases: anatomic adaptation, hypertrophy, maximum strength and muscle definition. The training program was personal and based on individual goal setting.

The issue about how Scania shall perform HVAC tests in the climatic wind tunnel CD7, which Scania is about to complete by year 2013, has resulted in four test methods for truck HVAC and also a test method structure. The test methods have been chosen to focus on sun, snow and rain simulations. These are adapted and developed according to what should be tested and to what can be tested in CD7, which has been the object. With CD7 different climates can be simulated in a controlled environment for complete truck level, from desert with high sun load to arctic cold and snow.The test methods represents a basis to start from, for designers and test engineers which make the testing more repetitive as well as time eventually can be saved. Before the test methods can be applied they must be verified as they are based on theoretical and empirical assumptions.

This master thesis project at KTH is performed in the Mechanical and Aerospace Engineeringdepartment at University of Florida (UF). The thesis is a small part of a gas turbine researchproject where a vapour absorption refrigeration system (VARS) and a high pressure regenerativeturbine engine (HPRTE) are integrated together. The main objective is to build a computermodel of the VARS. The computer model is supposed to be used to analyse the off-designperformance of the VARS and should also be easy to integrate as a subroutine in a more complexsystem model. To model the VARS some knowledge of the absorbent/refrigerant mixture had tobe well known, in this case a mixture of ammonia and water.

After emergencies involving chemical spills it is of great importance that correct measures are taken with short notice, both for the security of people and in order to minimize future environmental consequences. The RIB-unit at the Swedish Rescue Services Agency initiated this study, the aim of which is to propose changes to the existing chemical transport calculation tool: Chemical Spill 3.4, included in RIB - Integrated Decision Support for Civil Protection, so that it can be used for decision support as well as in preventive work. A rough estimation of chemical transport in the subsurface is considered being of great importance when making decisions during emergency response operations.The proposition presented in this report is a non site specific chemical transport model which is designed to give a rough estimation of NAPL flow in homogenous isotropic soil shortly after an instantaneous release. The model can be used at two levels; both in situations without access to information on subsurface properties, and with more accuracy in situations with knowledge of the included parameters. For that reason the user can choose among predefined alternatives or assign the parameters a numeric value to increase the quality of the model output.

The report describes an ecodesign thesis performed by the author at the ÅF EcoDesign Center. The basic idea of ecodesign is to develop products with a minimized environmental load, without neglecting other significant product aspects such as function and price. During the last couple of years the public interest in environmental friendly products has increased, which has made it possible for companies to make a profit from their investments in ecodesign. To meet the increasing market for ecodesign services ÅF started the ÅF EcoDesign Center, where the company has gathered all of their competence in ecodesign in order to help companies to become greener. The task was to develop a tool for an Eco Screening.

I en värld där kraven på flexibilitet, säkerhet och hårdvaruoptimering är nyckelfaktorer när det kommer till att välja IT-miljöer för företag blir virtuella skrivbord mer och mer poulära. Med dessa miljöer finns det också problem när det kommer till användarupplevelsen om nätverket ifråga inte kan uppfylla de krav som ett sådant system ställer. I detta arbete undersöks implikationerna vissa nätverksvariabler kan ha för en Virtual Desktop-infrastruktur, VDI. För att belysa dessa problem har två tester utförts på en VDI miljö. Det första testet gick ut på att mäta latensen då skrivbordsmiljön renderades för klienten från virtualiseringsservern vid olika nätverksdiamterar.

In many products a compromise between ground clearance and the required space to store the product has to be made. This problem attracted the attention of the authors of this thesis.The objective of this project is to develop a functioning solution to a foldable wheel. The solution should be applicable to several types of product groups. A limitation for this work has been made so that the work only covers solutions for lighter vehicles.The purpose is to drive this project forward, so that a solution can be found. Furthermore the purpose of the report is to clarify how the authors proceeded to design and construct the wheel according to a fixed specification.

  Aim. The aim of the study was to describe how nurses in home care experience to pursue palliative care in ordinary housing. Methods. The study had a descriptive design with qualitative approach and was carried out through semi-structured interviews with 14 nurses in home health care from two medium-sized Swedish municipalities. The material was analyzed with manifest and latent content analysis. Findings. The underlying theme that emerged in the study was: Working with palliative care in the patient´s own homes is positive but challenging. Informants describe among other things that they perceived palliative home care as meaningful and that relatives have a central role in the palliative home care since they are close to the patient around the clock. The stress that emerges from the heavy work load and the long geographic distances are described as strenuous and to affect the care in a negative way. Informants describe the home environment as challenging as it is often not adapted for care and the collaboration with the palliative team is described to be experienced as both positive and negative.

The thesis presented in this report has been made on behalf of Scania and their basic frame design department with the subject to solve an implementation of a weight sensing system in the chassis. The system is supposed to be implemented in the seat springs, and the reason for this is that all the force will have to go through the weight sensing transducers. With all the force going through the transducers the weight sensing system will not be sensitive for the differences in tolerances from manufacturing. The transducers could be pre-calibrated to avoid a calibration of the whole vehicle after it?s completed from the manufacturing line.Weight sensing systems is today a reality in trucks with air springs.

When designing roads it?s important to knowwhat loads will bedriven on it. The axles on heavy vehicles can either have super single tires ordual tires which, according to studies, damage the roads differently. The SwedishTransport Administration is developing an understanding for the character ofthese different kinds of axle and tire types on the loads induced on Swedishroads. In this thesis a field study was conducted to determine the distributionbetween axles with super single tires and axles with dual tires on heavy vehicles.A highway, a country road and a national road were investigated during thestudy.

Denna rapport är en del av ett examensarbete på avdelningen för "Byggteknik och design" med inriktning "husbyggnad, projektering och konstruktion" på Kungliga Tekniska högskolan i Stockholm, Sverige.Rapporten handlar om byggandet av ett tak för en skolbyggnad i byn Lwengo Basilla som ligger i sydöstra delarna av Demokratiska republiken Kongo. Skolprojektet finansieras av en ideell organisation i Sverige som heter "Elikia na Biso" och leds av Miza Landström. Designen och konstruktionen av skolan har tagits fram med hjälp av studenter från olika avdelningar inom Kungliga Tekniska högskolan (KTH). En grupp studenter från KTH hjälpte till att lägga grunden och väggarna i skolan. Nästa grupp av studenter skickades för att hjälpa till med byggandet av skolans tak.Denna rapport fokuserar på att dimensionera och konstruera taket på skolan med hjälp av lokala material på ett effektivt sätt.

Construction and maintenance of forest truck roads are a necessary element of industrial forestry. Payment for contracting services in this context can be done according to a number of payment models. This study will focus on the methods and consequences associated with a change of Holmen Skog?s payment model from per hour to per metric ton for ballast hauling. The aim of this study is to improve the economic efficiency of Holmen Skog?s ballast hauling in construction and maintenance of forest truck roads. This is done by formulating and evaluating a proposal for a payment model based on crowns per ton.

Native spider silk is an attractive lightweight natural polymeric material with a unique combination of strength, extendibility and flexibility. Synthetic, recombinant spider silk is an attractive biomaterial with several possible fields of application. When a foreign material is introduced to blood, this can for example cause unwanted coagulation and complement activation. The aim of this study was to investigate if coatings of heparin or albumin could improve the blood compatibility of films of recombinant spider silk and to develop an initial method to do so. Hypothetically, objects like pacemakers, stents and dental implants could be covered with spider silk films of high blood compatibility to reduce potentially harmful foreign body reactions caused by the immune defense. Increased blood compatibility would likely lead to improvements for both the individual patients and the society thanks to reduced load on healthcare institutions. Our objective was to assess the blood compatibility of both functionalized and non-functionalized recombinant spider silk by evaluating coagulation and activation of the complement system of the immune defense. Coagulation was evaluated visually on glass slides and complement activation was analyzed by measuring the concentration of the complement system mediator C3a in blood samples that had been exposed to the different materials. This study introduces a non-toxic and easy performed method of improving the blood compatibility of recombinant spider silk films by adding a heparin coating. Heparin coated surfaces had statistically significantly higher blood compatibility than uncoated surfaces. The effects of albumin coating of films were less clear compared to the results of heparin coated films. Complement activation could not be evaluated because of high activation in all samples prior contact with the materials that were included in the study..

A today common soil reinforcement method is the installation of lime-cement columns. Lime-cement columns have been used since the 1970?s and have been a useful method for stabilizing soil at great depths. It is mostly used for stabilizing road and railway embankments because the method is economically viable and the columns are easy to install. The total costs for the installation of the lime-cement columns is dependent on the numbers of installed columns, what percentage of lime and cement that has been used and the pattern in which the columns has been installed.

Syftet med denna studie har varit att undersöka de multinationella företagens ?tvingande joint venture-avtal? med de kinesiska tillverkarna, och hur det påverkar teknologisk överföring. Som metod för att samla in information valde uppsatsförfattaren att genomföra kvalitativa intervjuer, vilka var semi-strukturerade. Genom ett icke-sannolikhetsurval valdes tre företag ut för att delta i studien.Studiens slutsatser tyder på förutsatt att den kinesiska regeringens krav på joint venture-avtal reviderades eller helt slopades och de multinationella fordonstillverkarna därmed fick valfri möjlighet till FDI, då skulle det leda till att färre företag ingår joint ventures med kinesiska tillverkare. Dessutom ökar incitamenten för de multinationella företagen att överföra teknologier till den kinesiska fordonsindustrin om de har möjligheten att fritt bestämma FDI, däremot är det ingen garanti för mer effektiva teknologier.