Several cities have implemented various projects to improve traffic safety in city centers.During 1970s and 1980s the city centers changed as the suburbs grew and large shopping centers were located outside the center. At the same time, several projects were initiated with construction of pedestrian streets and restriction of traffic in the center. In year 1994,shared-used areas were introduced in Sweden and these areas are often used in center environments.In Sweden, municipalities are responsible for integrating security in public places and in comprehensive plans and detailed development plans. The National Board of Housing,Building and Planning is the authority for administrating planning issues and develop general guidance about planning. Traffic is one of their key issues, although today there are no concrete guidelines from the National Board of Housing, Building and Planningfor the design of traffic safety in city centers.Traffic safety in city centers affects many people because the city center is a public place.It is therefore important that there are current guidelines available that are helpful for changes and improvements in traffic safety in the city center.The purpose of this report is to formulate guidelines for planning city centers from a traffic safety perspective.

Housing construction very close to the lake Mälaren has become very popular today. One potential problem with these houses is the influence of the sea climate. Unprotected buildings are affected by strong winds and precipitation. So for that reason, it is very important to make an accurate climate investigation and use it for decision-making during the planning of the new settlement.It is very important with a good moisture protection regarding pelting rain, that is the combination of wind and rain. This is more important for buildings close to a lake, as this location normally means a higher exposure to wind.

The swedish national board of housing, Building and Planning,recommends that all stakeholders in the construction industryperform a moisture control design to make sure that the buildingachieves good moisture resistance. Since June 1, 2006 there are nospecific requirements or quantitative values for air leakage.Although the swedish national board of housing does presentrequirement that the building envelope must be sealed so that theclient?s requirements for specific energy consumption and installedelectric power for heating purposes are met. Despite this, studiesfrom SP shows that few buildings meet the client?s requirements inspecific energy, which increases the risk of occurrence ofcondensation-related moisture damage.This study aims to evaluate curtain walls connections from airsecurity and moisture safety.

The aim of this study was to illuminate how social workers in social services work with the social phenomenon, homelessness in two municipalities. The study is based on qualitative semi-structured interviews with interviewees from a department of social services. Our theories that we used was resistant inequality, structural discrimination, exclusion, empowerment and representation. After compilation of our empirical our conclusions are that homelessness is a complex phenomenon. Social workers handles homelessness based on client?s needs and the work is individualized.

Our main aim with this study is to shed a light over the social workers opinions about what they believe will be the consequences of introducing Housing First in the city of Stockholm. We wanted to examine the social workers perceptions about how Housing First could change their client?s autonomy and justice. Therefor we accomplished five qualitative interviews with social workers. We analyzed our empirical material with the theoretical terms; justice, autonomy and intern role-conflict.

This thesis has been performed at Scania CV AB Technical Centre in Södertälje and its aim hasbeen to study the causes and effects of deformations in the interface between the rear axlehousing ADA1100 and the central gear house R780 during operation. Design changes that wouldincrease the sealing capability of the studied interface are also suggested. Finite element (FE)and CAD software have been the primary tools in this study.Finite element (FE) simulations are used in the industry to predict and develop engineeringdesigns. The main motive for FE simulations has traditionally been to identify weak spots in thedesign, regarding high tensions and large deformations.The FE model is an aggregation of submodels and interface models that represents the rear axlehousing, suspension, central gear, central gear housing, wheels, bolts and weldings, and theirinteractions. The submodels have different material properties and they are connected withcontact interface models.Boundary conditions are defined on the bushings in front of the rear axle and on the air bellowsbehind the rear axle.

Milk yield levels in dairy cows are influenced by many factors such as nutrition, breed, health status, management and environment. This study was conducted among small scale farmers in Zambia, where the climate can be dry for up to six months per year and cause a lack of green pasture for livestock and on-farm produced feed. The purpose of this study was to identify management factors that can influence milk yield at small scale dairy farms in Zambia, and present advice that could improve productivity, without the need of expensive investments. The study included semi-structured questionnaires presented to the farmers (n=29) including questions about cattle management and milk production. Testing of somatic cell count (SCC) with DCC (DeLaval Cell Counter) from herd milk samples (n=56) and observation of housing and animal body condition on-farm was also made.

The aim of this Master?s thesis is to examine how representations of identity construction are performed through the characters in the novel Snabba Cash by author Jens Lapidus. I examine what means the characters are using, and how the identity construction processes are related to the idea of modern society. For a theoretical background I use sociologist Anthony Giddens? theories regarding modernity and self-identity, to study general identity construction.

Booth for operational planning of harvesting and for long term planning, data is today collected manually. Intensive objective field inventories are usually too expensive. To enhance optimisation of timber flow from forest to industry Moore efficient methods for measuring tree stems of standing trees are needed. The performance of terrestrial laser scanners have improved and these could possibly be used within forestry in the future. The objective of this study was to validate how a terrestrial laser scanner could be used to measure stem diameter, and to test how the errors depend on distance from the scanner and tree species. Two plots (one pine and one spruce) were used for this study.

The interest in harvesting wood fuel in conflict stands has grown in recent years as a consequence of the increased demand for biofuel. Conflict stands are young forests that have not been cleaned and have a large number of stems ha-1with a great height and diameter distribution. This means that traditional field measurements in conflict stands are difficult and very time consuming. Therefore, the forestry sector is in need of new, more efficient inventory methods. In this study, the Lidar data from Lantmäteriet?s (the Swedish mapping, cadastral and land registration authorities) new national height model was used in combination with plots from the Swedish national forest inventory from 2009 to create functions for; height, volume, diameter and number of stems.

It?s a fact that the climate is affected by the vehicle that runs on the worlds roads. But theconstruction of the road itself is rarely thought of as a climate threat. Svevia and the Swedish roadadministration have opposite views of how the construction of roads should be carried thru. It?sthe difference between those two construction methods that is the base in our thesis.The amount of energy use or the emissions are not analyzed for neither the Swedish roadadministrations nor Svevias construction models.

This study was conducted at VikingGenetics' bull breeding station in Falkenberg, Sweden. The bulls waiting for the results of their progeny testing at this station are either kept in group housing or individual housing. Since both of these housing systems have advantages and disadvantages, it was in the interest of VikingGenetics to know which of these housing systems is the best. The aim of this study was to investigate the welfare of the bulls in these two housing systems through behavioural observations and the use of activity monitors. In the preparations for the study 16 bulls, 8 in each housing system, were chosen.

AbstractWork to develop the Eurocodes started in 1975 by the European Commission adopted a program to eliminate trade barriers within the construction area. The goal was to create common European design standards that would replace the member countries' own rules. Eurocodes will replace The National Board of Housing Building and Planning, National Rail, The National Road Administration and other agencies' calculation rules for the buildings structures. The transition to the use of Eurocodes looks like this:Eurocodes set to Swedish standards  between 2002 ? 2007They can be used parallel with national standards 2006 - 2009 The total transition is at the end of 2010/2011.Right now is going on a lot of work for replacement of the existing standards to Eurocodes.  The transition to the new calculations` standards, many construction companies and consulting firms facing a big changes and competitions.

The purpose of this study was to gain a better understanding of how medium-sized construction companies adapt and how they choose to reorganize their operations in relation to the recession. The study has as its theoretical starting point theories about organizational learning, the impact of the economy on construction companies and strategies for dealing with recessions. The method used to conduct the study was semi-structured interviews with representatives from 15 different construction companies. The results of the study show that they used several strategies to adapt and reorganize the business in accordance with the recession. Some construction companies had to make cost savings as a result of the recession.

Construction of wetlands in the agricultural landscape may reduce nitrogen and phosphorus transfer to streams, thereby reducing the eutrophication of lakes and seas. The agriculturalstream Lillån, a tributary to stream Sagån, ends up in Lake Mälaren and is transporting large amounts of these plant nutrients. The aim of this study was to estimate how hypothetical wetlands of different size and location may reduce nitrogen and phosphorus load from stream Lillån. Estimated nutrient retention in several small wetlands was compared to retention in a single large wetland based on existing data from the agricultural stream and from a nearby smaller stream. Retention in the stream was suggested to decrease along with the nutrient concentration in the water.