This master of science thesis is focusing on how the fault handling on hardware connected toa control unit on a Scania vehicle is working. To the hardware counts buttons levers, sensorsand CAN. The work has been concentrated upon how the fault handling is working and if it ispossible to find any new fault modes.The control unit that has been studied is called the Coordinator and is the core in Scanias threenetworks of control units. The Coordinators work is to transmit messages between the threenetworks and to process signals from buttons, levers and sensors. The values is then usedinternally or is sent to other control units on the CAN networks.

This study concerns congenital defects in pigs; umbilical and scrotal hernia, cryptorchidism, kyphosis, splay legs, anal atresia, intersexuality and congenital tremor. The aim was to describe and estimate the prevalence of these defects and estimate the heritability for the most frequent defects, scrotal hernia and cryptorchidism in purebred Swedish Hampshire, Landrace and Yorkshire populations. Furthermore, information and opinions from herdsmen in commercial herds was collected and analysed. A low proportion of congenital defect pigs is of importance both from animal welfare and economic point of view. The accuracy of registration of the presence of defects in the litters has a decisive role for the ability to select against these defects.

Because of new emission and on board diagnostics legislations, heavy truck manufacturers are facing new challenges when it comes to improving the engines and the control software. Accurate and real time executable engine models are essential in this work. One successful way of lowering the NOx emissions is to use Exhaust Gas Recirculation (EGR). The objective of this thesis is to create a mean value model for Scania's next generation EGR system consisting of a poppet valve and a two stage cooler. The model will be used to extend an existing mean value engine model.

?Are the headwaters streams at the right position in the map? is a study that has been performed on behalf of Holmen Forest, region Örnsköldsvik. This study will be the basis for deciding if the Hydrology Layer Property map or Holmen Forest map will be used for planning nitrogen fertilization in forestry. The background to this study is that nitrogen fertilization near water will increase the risk of nitrogen leaching out into the water systems, which has a negative impact on the environment. The headstreams positions have been recorded in the field with a GPS and the data analyzed in the geographic information system ArcMap.

The objective of this project was to develop an application for mobile phones using the Android operating system. The main goal was, with the help of GPS, to pinpoint locations, measure distance traveled and illustrate the progress on a map. Functionalities for just showing the map, fetching addresses and saving to a database was also implemented. The result of the work was a proper application, called MeasureApp, that fulfills the goals set in the planning stages of the project. MeasureApp can be used to measure distances where accuracy is not a main factor, i.e walks or runs.

This report describes a study of two different methods to achive the best possible result in setting out apartment details. These two methods are the setting out of details with a measuring tape from baselines and the setting out procedure with an instrument (totalstation).Through our knowledge in surveying and mapping technology and help from a carpenter, this investigation has been implemented. The setting out using a tape has been performed by letting the carpenter to set out windows, bathroom and water- and drain-details from baselines and drawing. The setting out using a surveying instrument was carried out by means of a Trimble Total Station. These two methods have been compared in order to detect and show the difference that occurs.The report shows the investigation background story from the practice of Swedish Mätcenter in Karlstad.A result of differences in accuracy and time is described in the report, as well as their theoretical consequences.

The objective of this project was to develop an application for mobile phones using the Android operating system. The main goal was, with the help of GPS, to pinpoint locations, measure distance traveled and illustrate the progress on a map. Functionalities for just showing the map, fetching addresses and saving to a database was also implemented. The result of the work was a proper application, called MeasureApp, that fulfills the goals set in the planning stages of the project. MeasureApp can be used to measure distances where accuracy is not a main factor, i.e walks or runs.

The primary intention of this paper was to visually compare film trailers without considering semantic information, through use of a self-developed Matlab program, resembling that of human perception. Circa 150 people participated in an online survey where they were shown two film trailers and asked to rate their visual similarities. The result from the program was weighted against the survey results in such a way that the weights corresponded to a 75% accuracy between the program?s and the participant?s (for participants with prior experience in the field of photography and/or film) comparisons.How accurate can we compare still images from film trailers, and find similar trailers for the human viewer, by analyzing saturation, color tone, contrast and lightness with a self-developed Matlab program..

In early January 2010 the authors participated in a meeting with the chief engineer for a company in which a central part is manufacturing of printed circuit boards (PCB). At this meeting it emerged that the machinery and production methods have changed substantially since the early 1990's. The spreadsheet for preliminary production time calculations by the company is today based on conditions from almost 20 years ago. The company has over the years been trying to adjust the spreadsheet template. The result of these adjustments has filled it with historical residue, something which makes the template difficult and time consuming when the primary user tries to handle it.The purpose of this study was to help the company increase its accuracy in the representation of the production times for the different PCB-based products by developing a new costing model based on an already existing but inadequate spreadsheet template. The company also expressed the wish that the new costing model would be less time consuming to work with.The methods used to achieve the goal are interviewing, participatory observations and meetings with relevant persons. The data obtained were analyzed using the theory on PCB production and visualization of data.

The objective of this project was to develop an application for mobile phones using the Android operating system. The main goal was, with the help of GPS, to pinpoint locations, measure distance traveled and illustrate the progress on a map. Functionalities for just showing the map, fetching addresses and saving to a database was also implemented. The result of the work was a proper application, called MeasureApp, that fulfills the goals set in the planning stages of the project. MeasureApp can be used to measure distances where accuracy is not a main factor, i.e walks or runs.

A multivariate cross-sectional model is used in this thesis to proxy for expected earnings and to estimate return on equity for 214 companies over the period 2009-2013, using Swedish data. The model, which has never been tested on Swedish data before, is first confirmed to function as a forecasting model for expected return. Furthermore, the model is evaluated through a comparison with two univariate models based on the assumption that return on equity follows a mean reversion process. Forecast accuracy is calculated as the difference of estimated returns and actual returns. The results show that the univariate models' forecasts are superior to the multivariate model's..

Value-at-Risk (VaR) is among financial institutions a commonly used tool for measuring market risk. Several methods to calculate VaR exists and different implementations often results in different VaR forecasts. An interesting implementation is historical simulation, and the purpose of this thesis is to examine whether historical simulation with dynamic volatility updating is useful as a model to calculate VaR and how this differs in regard to type of asset or instrument. To carry out the investigation six different models are implemented, which then are tested for statistical accuracy through Christoffersens test. We find that incorporation of volatility updating into the historical simulation method in many cases improves the model.

In early January 2010 the authors participated in a meeting with the chief engineer for a company in which a central part is manufacturing of printed circuit boards (PCB). At this meeting it emerged that the machinery and production methods have changed substantially since the early 1990's. The spreadsheet for preliminary production time calculations by the company is today based on conditions from almost 20 years ago. The company has over the years been trying to adjust the spreadsheet template. The result of these adjustments has filled it with historical residue, something which makes the template difficult and time consuming when the primary user tries to handle it.The purpose of this study was to help the company increase its accuracy in the representation of the production times for the different PCB-based products by developing a new costing model based on an already existing but inadequate spreadsheet template. The company also expressed the wish that the new costing model would be less time consuming to work with.The methods used to achieve the goal are interviewing, participatory observations and meetings with relevant persons. The data obtained were analyzed using the theory on PCB production and visualization of data.

AbstractIn this thesis we aim to extend the current theories about a concept called persona. A persona is a model of a user, mostly based on qualitative research and made with such accuracy that it to some extent can be used as a replacement of a real user in a development process and as a communicative tool. We will present a way of constructing this persona without meeting the actual users and follow up with interviews from the organization using them. This will lead to a model over the process of introducing personas as a concept in an organization,previously not familiar with the concept. The model is adapted to also work for projects and organizations where the concept is already known..

Nimo Verken AB is the leading producer in the Scandinavia of drying cabinets. The construction has, with small changes, been the same since the 70s with a thermostat and a timer as controlling system. There was a wish to develop a modern cabinet which showed remaining time on a display and with energy saving functions.In this report we go through how it is possible to implement a digital controlling system, where remaining time is shown on a display and where it is possible to choose a preset ?program?.The report first presents the fundamental theory for a PIC, where we describe the different registers, how interrupts are handled, the internal clock function and how data is sent to control the different parts of the construction.Next the report presents and describes the new hardware that is needed, such as the encoder, the temperature sensor and the display.After the theory we describe how the program in the PIC may be drafted. Last in the report we have the result of the tests of the temperature variations and the accuracy of the time..