A study was carried in conjunction with the Orthodontic department at Halmstad General Hospital in Sweden to investigate the possibility of reducing cost and manufacture time of dental implant drill guides. The current system involves sending a digital image in STL format to the Materialise factory in Belgium where information of the position of dental implants is translated onto a moulded mouthpiece. Drill guides are placed in the mouth piece which is then returned to the surgeon. The mouthpiece complete with drill guides is then placed in the patients mouth and used as a guide for the implant drill holes. The cost of 10000 sek and a turnaround time of 2 weeks gave rise to the need for a faster and cheaper solution.

Thinning is one of the most important silvicultural activities in middle aged forests, partly to minimize damages and partly because it leads to earlier harvesting revenues and increases the value of the remaining trees. There are many different indices used to describe stand density and thereby the need of thinning in forests today. Studies have shown that forest variables can be estimated with high accuracy using airborne laser scanning and it is likely that the method could also be used to estimate forest density indices. In this study, the possibility of using the forest density index ?H² to determine and map priorities for thinning operations for a forest area was examined.

This report is part of a Bachelor?s degree corresponding to 15 creditsat the Royal Institute of Technology, Stockholm. The work hasbeen carried out by Max Wikander, author of the report, supervisedby Lanie Gutierrez-Farewik and Erik Dijkstra.Gait analysis includes measurement, characterization and assessmentof human movement and is used to assess kinematic or otherabnormalities during gait. Center of rotation and the axis of rotationof a joint are fundamental parameters in motion analysis. However,the ability to create individualized analysis is limited by the lack ofaccuracy when these parameters are calculated.

Bakgrund: Affärspressen publicerar dagligen rekommendationer och riktkurser från aktieanalytiker och dess analyser kan anses ligga till grund för investeringsbeslut hos såväl privata som institutionella investerare. Aktieanalytikers förmåga att prognostisera aktiekurser är ett outforskat område med endast ett fåtal publicerade studier på variabeln riktkurs. Tidigare studier fokuserar på att utvärdera träffsäkerheten i prognoserna men få av dessa bidrar till förståelse kring vad som påverkar prognosfelens storlek.Syfte: Syftet med studien är att analysera aktieanalytikers förmåga att prognostisera framtida aktiekurser.Genomförande: Studiens deduktiva ansats gör att resultat från tidigare studier ligger till grund för formulering av forskningsfrågor och utformning av tänkbara påverkansfaktorer för träffsäkerhet. Träffsäkerheten i riktkurserna analyseras via regressionsanalys där det absoluta prognosfelet är beroende variabel medan de formulerade påverkansfaktorerna är förklarande variabler. Vidare studeras en eventuell närvaro av överoptimism i prognoserna genom att undersöka fördelningen av det relativa prognosfelet via T-test.Resultat: Aktieanalytikers riktkurser påverkas av flertalet faktorer, där ett bolags storlek och beta uppvisar tydligast samband med träffsäkerheten.

Platelet aggregation is a major and common problem in blood samples from cats. This greatly affects the accuracy of counting of the platelets. Because of the difficulties in counting feline platelets, results for patients and reliable reference values for cat platelets are currently so inaccurate as to be almost useless in diagnosis of thrombocytopenia. In this study we used an effective method to prevent platelet aggregation. Blood was collected in CTAD test tubes and prostaglandin E1 was added to the blood sample.

This report is part of a Bachelor?s degree corresponding to 15 creditsat the Royal Institute of Technology, Stockholm. The work hasbeen carried out by Max Wikander, author of the report, supervisedby Lanie Gutierrez-Farewik and Erik Dijkstra.Gait analysis includes measurement, characterization and assessmentof human movement and is used to assess kinematic or otherabnormalities during gait. Center of rotation and the axis of rotationof a joint are fundamental parameters in motion analysis. However,the ability to create individualized analysis is limited by the lack ofaccuracy when these parameters are calculated.

This report is part of a Bachelor?s degree corresponding to 15 creditsat the Royal Institute of Technology, Stockholm. The work hasbeen carried out by Max Wikander, author of the report, supervisedby Lanie Gutierrez-Farewik and Erik Dijkstra.Gait analysis includes measurement, characterization and assessmentof human movement and is used to assess kinematic or otherabnormalities during gait. Center of rotation and the axis of rotationof a joint are fundamental parameters in motion analysis. However,the ability to create individualized analysis is limited by the lack ofaccuracy when these parameters are calculated.

This thesis has been carried out in New Zealand in collaboration with the University of Waikato. In association with Dr. Mike Duke the purpose of this work is to investigate whether two different software for modeling of photovoltaic systems are useful in the teaching of solar energy.The next ten years grid-connected photovoltaic systems are assumed to increase and therefore also a rising demand for people with engineering knowledge are to be predicted. For engineer students with a focus on solar energy a more practical teaching with design software´s can be a good method to make the students comprehend more when it comes to large scale photovoltaic systems and be more prepared for working life.The software´s used is called Transient System Simulation (TRNSYS) and Photovoltaic Systems (PVSYST) which are both well used throughout the world. To assess the reliability of the software´s, a reference solar power plant at 16.1 kWp installed capacity are used, which consists of photovoltaic modules from four different manufacturers.

In today´s forestry, assessments of needs for thinning are based on basal area measurements. This is an indirect measurement. The approach and the developed assessment tables are based on an assumed production forest, which implies that management proposals in stands that deviate from the basic model may be misleading. Since Walter Bitterlich in 1948 launched the idea of the relascope, several modifications have been developed for different purposes. In common is that all are based on a certain angle measurement principle.

SEB Merchant Banking provides to its institutional customers a true market neutral product called Dynamic Manager Alpha (DMA). The DMA is constructed by a long position in an exceptionally well performing mutual fund and a beta adjusted short position in an appropriate index. The key to making the product market neutral is adjusting with the correct beta, since the beta changes, it is very important to have a good model for predicting beta in the future.This master thesis begins with describing what beta is in a CAPM sense. It then continues with recognizing the so called ?Two Beta Trap?, which separates two kinds of beta.

SEB Merchant Banking provides to its institutional customers a true market neutral product called Dynamic Manager Alpha (DMA). The DMA is constructed by a long position in an exceptionally well performing mutual fund and a beta adjusted short position in an appropriate index. The key to making the product market neutral is adjusting with the correct beta, since the beta changes, it is very important to have a good model for predicting beta in the future.This master thesis begins with describing what beta is in a CAPM sense. It then continues with recognizing the so called ?Two Beta Trap?, which separates two kinds of beta.

SEB Merchant Banking provides to its institutional customers a true market neutral product called Dynamic Manager Alpha (DMA). The DMA is constructed by a long position in an exceptionally well performing mutual fund and a beta adjusted short position in an appropriate index. The key to making the product market neutral is adjusting with the correct beta, since the beta changes, it is very important to have a good model for predicting beta in the future.This master thesis begins with describing what beta is in a CAPM sense. It then continues with recognizing the so called ?Two Beta Trap?, which separates two kinds of beta.

SEB Merchant Banking provides to its institutional customers a true market neutral product called Dynamic Manager Alpha (DMA). The DMA is constructed by a long position in an exceptionally well performing mutual fund and a beta adjusted short position in an appropriate index. The key to making the product market neutral is adjusting with the correct beta, since the beta changes, it is very important to have a good model for predicting beta in the future.This master thesis begins with describing what beta is in a CAPM sense. It then continues with recognizing the so called ?Two Beta Trap?, which separates two kinds of beta.

Laser for material processing possesses a number of advantages which mean that it has been and will be an important component for a wide range of industries' future development. Cutting materials processing is the dominant use of laser technology and has revolutionized the manufacturing industry. The aim of this thesis is to describe the principles of metal cutting by laser, how laser cutting is applied in practice and to identify how Swedish companies are using laser cutting. For the theoretical and technical description of laser cutting literature studies are the primary source of information. The empirical basis for the mapping of the Swedish industry for laser cutting is grounded on a survey; this includes Swedish companies that use laser cutting in their production.

SEB Merchant Banking provides to its institutional customers a true market neutral product called Dynamic Manager Alpha (DMA). The DMA is constructed by a long position in an exceptionally well performing mutual fund and a beta adjusted short position in an appropriate index. The key to making the product market neutral is adjusting with the correct beta, since the beta changes, it is very important to have a good model for predicting beta in the future.This master thesis begins with describing what beta is in a CAPM sense. It then continues with recognizing the so called ?Two Beta Trap?, which separates two kinds of beta.