The energy that the earth receives from the sun hourly has potential to cover a year?s energy demand in the world. Further, this type of energy is environmentally friendly, natural and free of cost. This report covers solar energy in an urban environment and consists of a case study of installations of photovoltaic cells in a part of the city of Stockholm. It is mainly the economic aspects that are covered but there is also a discussion about the practical consequences and the sustainability as a result of integration of solar energy in an urban environment. The aim of the study is to present results from economic calculations for utilization of solar energy in chosen buildings in Kungsholmen in Stockholm.

The Swedish potential of electricity production from roof mounted solar panels has been determined in three steps: accessing the existing roof top areas, simulating the amount of electricity solar panels can produce on these areas and finally analyzing how large the necessary economical change is to make the solar cells profitable.The total existing amount of roof top areas are 319 square kilometers and the area distribution follows the distribution of people. This leads to an installed power of 47,9 GW which are expected to produce 49,0 TWh electricity per year. If the quality of the electricity is prioritized the highest the power is reduced to 3,7 GW, generating 3,8 TWh yearly, but if the hosting capacity is calculated from Sweden?s total electricity need, the capacity is 42 TWh per year.Today, solar panels are not profitable in Sweden for houses, even though there is a subsidy of 35 % of the investment costs, discounted in 25 years. The profitability is calculated with a cost of capital of 5 %, a price on electricity of 1 SEK/kWh and an investment cost of 20 SEK/Wp.

I följande rapport behandlas ämnet förnyelsebar energi i samband med textila material. I resultatet ges förslag till möjliga tillvägagångssätt för integrering av flexibla solceller i väv- och varptrikå. Alternativ till maskintillverkare och maskintyper redovisas och potentiella användningsområden diskuteras. Även förlag på typ av flexibel solcell presenteras. Teorin vilket rapporten grundar sig på är humanekologisk.

Construction of an autonomous wind station was a project with the goal of creating a product that could collect wind data from a sensor and then transfer this data to a server wirelessly over the GSM network. The device would be powered by batteries and solar cells and function fully without requiring external power supply. This required that a small computer was constructed and programmed to store and send data at predetermined cycle times and programming of a server that received the sent data. The project also required optimization of power consumption and dimensioning of solar cells and batteries based on this. The construction of this station demanded research both for the selection of hardware and programming software. The computer was based on a microcontroller and a GSM module that sent the data over the 2G network.

In the middle of Australia there is a city called Alice Springs. The city has one of the highest amounts of daily sunshine hours and sun irradiation in the world. The Australian Government runs a project called Solar Cities, and Alice Springs is one of the participators. The main part of the goal with the Solar Cities project is to increase the amount of electricity generated by solar power and by doing that lower the impact on the environment. This thesis examines the possibilities for construction of a large scale solar power plant in Alice Springs. This is done to determine the potential of creating a more sustainable energy system in the city.

In the middle of Australia there is a city called Alice Springs. The city has one of the highest amounts of daily sunshine hours and sun irradiation in the world. The Australian Government runs a project called Solar Cities, and Alice Springs is one of the participators. The main part of the goal with the Solar Cities project is to increase the amount of electricity generated by solar power and by doing that lower the impact on the environment. This thesis examines the possibilities for construction of a large scale solar power plant in Alice Springs. This is done to determine the potential of creating a more sustainable energy system in the city.

One of the city of Stockholm?s main objectives is to have a society completely free from fossil fuels. To achieve this, several investments regarding improvements in energy efficiency and renewable energy are currently being planned or implemented. One of these investments is a project called Hallbara Jarva which is located in the suburbs of Stockholm. The purpose of this thesis is to examine the prospects of an investment in photovoltaic cells from an energy-saving and economical point of view. The analysis is limited to three buildings within Hallbara Jarva and is intended for the property owner.  Solar energy is a type of renewable energy source and is commonly divided into solar heating and solar power.

There have been several projects with solar installations in Sweden, and Sala-Heby Energi (SHE) wanted to create a solar plant. The question answered in this thesis is whether it is economically viable to create such a source of sustainable, renewable energy. The plant would be built with the help of the financial effort from 120 customers. This economic union would sell the electricity to the SHE, for SEK 4.50 per kWh up to a certain level over a period of 10 years. It would be a long term commitment to environmentally friendly electricity, using solar cells which convert sunlight directly into electricity.In year 2009 there was introduced a new state aid for photovoltaic systems, to create an increased and continuing interest in solar cells.

In recent years it has become more and more evident that man has contributed to much of the climate changes that have taken place during the last century. A major challenge today is to reduce emissions and energy usage at the same time as the global population is growing. To contribute to a better environment, Stockholms Stad has set at target of becoming fossil fuel free by the year of 2050. The construction of new districts is done with this goal in mind; energy efficiency and renewable energy sources are examples of methods to achieve this.Solar energy is considered to be a sustainable energy source and the most common techniques to harvest solar energy in Sweden are solar cells and solar collectors which produce electricity and heat respectively. This report aims to investigate whether an investment in any of these systems would prove to be economically beneficial at Kvarnholmen, a district under construction in eastern Nacka, Stockholm.Since the finished blueprints only cover a small portion of Kvarnholmen, the report examines the possibilities for a house where construction has already begun, Nya Kvarnen.

The aim of this thesis is to investigate the electric solar potential on the Swedish island Gotland. The Gotlandic habitations have been divided into four house categories. For each category energy demand, roof area, geographic orientation androof tilt have been decided. Solar radiation data have been collected from the Swedish solar radiation model STRÅNG (STRÅNG, 2012).The buildings characteristics and the solar radiation have been used as input values in common solar formulas, the solar potential for each building category have been summed up to a total electric solar potential for the region.The electric solar potential on Gotland was calculated to 242 GWh/year with solar data from 2010. Gotlands largest city, Visby, is marked as cultural heritage by UNESCO (UNESCO, 2012).

The high level of energy consumption that the industrialised countries have reached and thepollution that this brings has long been a cause for analysis and debate, development and usageof so called renewable energy sources is therefore more important than ever. The energy in theelectromagnetic radiation from the sun is an interesting alternative. One way of harvesting thisenergy is by using solar cells, devices that generate DC current when exposed to electromagneticradiation.The goal of this master?s thesis was to design a solar powered power supply to Syntronic AB?sMidrange platform. The envisioned application is a stand-alone distributed embedded system,for example a node-based temperature monitoring system.

This report is a result of a bachelor thesis at the school of Architecture and the Built environment (corresponding to 15 HP) and is written during spring 2012 at the Royal Institute of Technology (KTH) in Stockholm. The Bachelor's essay is based on the design and dimensioning of a house which is located at a predetermined site in Malmo, Sweden.The idea is to construct a house that is appropriate to use for an average Swedish family of four family members. The house is designed in a modern way with respect to ease of access and disabled facilities. The installation that have been considered are heating, ventilation, sanitation and electricity. Construction calculations and material selection are also discussed.Furthermore, a study about photovoltaic cells has been done.

Hematology-instruments that analyze blood cells can at specific cases be followed by manual counting with a hemocytometer. The plastic hemocytometer which has a fixed coverslip and is assigned for disposable use, appears to reduce the problems arising from the use of the traditional glass hemocytometer, for instance coverslip-application difficulty and dust particles. Capillary whole blood sampling may be useful for patients at the emergency department and in addition, a smaller volume of blood is taken compared to venous blood sampling. This study will focus on the platelet- and leukocyte count (PLT and WBC) in venous and capillary blood, in order to compare the plastic- and glass hemocytometers with Sysmex XN-2000 (Sysmex Corporation, Kobe, Japan), and verify if capillary whole blood sampling can be used for the measurement of these hematological parameters. 30 subjects donated both capillary- and venous blood samples and these blood samples were analyzed with glass- and plastic hemocytometers with Sysmex XN-2000 as the reference method.

Photovoltaic Systems in Sweden has longbeen heavily dependent on subsidies and grants to bring in a profit for the investor. Production of excess electricity is a major reason for this as the compensation for excess electricity today is low. However, there are businesses that have an electricityneed that are particularly suitable for solar electricity. These businesses have an electricity demand when the sun shines the brightest and if the Photovoltaic System is properly scaled, the excess electricity can be minimized. A golf club is that kind of a business and this thesis aims to examinate the solar power potential for golf businesses in Sweden.Nine golf clubs was selected from different locations in Sweden.

The sun is essential to life on earth and no matter where you are, there is a constant need ofenergy. Nearly 800 000 years ago man learned for the first time to use fire in a controlled way.Since then, fire has given us the opportunity to inhabit places despite a cold climate. In Swedenthe resident sector accounts for a major part of the total consumption of energy. In a time whenenvironmental issues and greenhouse effects are increasing, we also see a future of rising energyprices. With this perspective, we have in this bachelor thesis in the Building Environment at theRoyal Institute of Technology, KTH, in Stockholm decided to focus on the renewable energysource, solar energy.The energy from solar radiation is a free resource and does not have any negative effects uponthe environment.