The agricultural sector is currently highly dependent on fossil fuels, with diesel beingmost prominent. There are however both historical and modern alternatives thathave not been subject to enough evaluation to disregard them as suitable alternative.This report aims to theoretically investigate the feasibility of converting aconventional diesel driven tractor to run on electricity, delivered via a cableconnected to either the main power grid or on-site electric production, such asphotovoltaic. Delivering electricity to the machine via a cable is a method withhistorical roots in the early 20th century and in the present day mining industry.The economic and technological potential of the technique are evaluated, along withthe examination of several different motor powers, voltages, losses and constructionideas. The report finds the technique to be both possible as well as long termeconomically and environmentally beneficial. To realise this method however, somedeviations from the present methods of agricultural farming must be made,considering the more advanced driving patterns, the limited mobility and therequirement for extra driver awareness.

Vid hja?rtoperationer leder man bort blodet fra?n hja?rtat och kopplar upp patienten till en hja?rt-lungmaskin med tillho?rande beha?llare (kardiotomi-reservoar). I det o?ppna sa?ret tillfo?rs koldioxid kontinuerligt. Detta go?rs fo?r att avlufta sa?rha?lan och hindra luft fra?n att komma in i hja?rtat och de stora ka?rlen under kirurgi.

Information about vibration injuries as a preventive measure is beneficial to society as well as the individual. As early as after a few years work with machines that vibrate can cause young sensitive persons to develop vibration injuries.An evaluation has been done on a web page with focus on information about work related vibration injuries. As a part of the evaluation a user observation and interview study was performed with workers who worked in different occupations. The workers all used machine that vibrate as part of the work. A total of eleven workers participated in the study.

Within literature, politics and science, there is a claim that ?tree avenues are important?. But the question and the goal for this essay are to explore the pretext to how and why. Planting tree avenues is a 4000 year old tradition and they are a common element in the Swedish and Scanian landscape since the 18th century. They were first mainly planted by aristocratic land-owners or on their initiative, but since the 19th century also by farmers.

Det övergripande syftet med denna studie var att jämföra volymtillväxten i skog skött enligt principen Naturkultur, genom olika starka höggallringar, med skog skött enligt traditionellt trakthyggesbruk. För att besvara frågeställningarna hur volymtillväxt och inväxning skiljer sig mellan de olika behandlingarna utfördes en fältinventering, under sommaren 2012, av ett försök anlagt 1990-91. Försökslokalen var belägen i Åliden, 64ºN 20ºE, cirka 35 kilometer norr om Umeå. Försöket var anlagt i en sydvästsluttning 155 meter över havet och var tänkt att representera Västerbottens kustland. Försöket i Åliden ingick i en serie om tolv block med fyra behandlingar per block. Behandlingarna var dels två naturkulturbehandlingar där skog lämnats (Gles och Tät), en naturkulturbehandling där 90 procent av skogen avverkats och en behandling enligt traditionellt trakthyggesbruk (Kal och Kont).

Bacteria are a problem that occurs naturally in dishwashers when the dish stands there dirty for an extended period of time. To get rid of the unpleasant smell that the bacteria is causing, the most common solution is to run a regular washingcycle which can cause problems for the environmentally-conscious consumers since this causes unnecessary energy waste and emissions of chemicals in the washwater. To solve the problem in a more environmentally-friendly way by directly attacking the bacteria with an appropriate bacterialreductionmethod can therefore be an attractive feature in a dishwasher. There are many different ways to treat surfaces that have been exposed to the bacteria. Some high-profile methods are UV-radiation, microwaves and oxidant (ozone) that all three have had success in reducing bacteria in different contexts.

Corn is an important food and feed crop in the world, in Sweden it?s up till now grown on limited acreages mainly for silage. But I think it can get more important if you can grow it also for grain, because it?s a good animal feed for example, for life stock-, pigsand poultry. On of corns advantage is that it can produce the same amount of dry matter as for example wheat, barley and rise but with 25% less water. I will examine if it possible to grow corn for grain production in the south of Sweden.

An investigation of the heat impact of laser cutting on the material properties when producing tensile and impact test specimens of different steel types of varying thickness has been performed. The purpose of the thesis project was to provide recommendations regarding how much material that needs to be milled from the laser cut edge before tensile and impact tests. The study has been performed partly by investigating the test specimens by heat camera when the specimens were cut in the laser cutting line and partly by performing hardness tests, investigation by microscopy, and tolerance and roughness measurements and tensile tests of the laser cut material and material produced in the traditional multi operation machine. The results show that the heat affected zone in the thicker materials is greater than previously thought of, and that the currently used recommendation has to be adjusted. The study clearly shows that the thicker the material, the greater the heat affected zone, independently of the steel type, since the thicker material takes longer time to cut.

Approximately 20% of the milk within the udder of a cow is stored in the cistern and immediately available for milk removal, while activation of the milk ejection reflex is required for removing the remaining milk stored in the alveolar compartment. The aim of this literature review is to describe, evaluate and consider implications of the three different suckling activities that the calf displays during a suckling bout. In terms of milking, these phases are represented by pre-stimulation, stimulation during milking and post-stimulation. Pre-stimulation is commonly performed in order to induce the milk ejection reflex, whereby the hormone oxytocin is released and the alveoli in the secretory tissue are contracted. Time requirements regarding pre-stimulation must be considered in relation to lactation stage and milking interval.

In industries today the demand for reading the state of industrial equipment and thus prevent machine breakdown, is increasing. The company HMS Industrial Networks AB has a product on the market, Netbiter EC350 that is used to read sensors and thus find out the condition of industrial equipment. By reporting scanned data to users through a cloud service, users can keep track of their equipment. When developing Netbiter EC350 a slot was made for a Bluetooth module to offer clients a wireless reading in future developments. In this project a prototype was made to show how this Bluetooth communication can be implemented. The goal of the project was to create a Bluetooth communication between a Bluetooth sensor and Netbiter EC350. A user interface was made to allow the user to read sensor values. The result of the project shows how a Bluetooth communication can be implemented to read sensors wireless and therefore it fulfills its purpose and goal.

Man's life has changed in many ways since technology made it?s entry for public at large. In response to this change the science of human-machine interaction was invented. It has in turn evolved into human-computer interaction. With this science the focus is on the customization of the system for the actual person who will use it.The thesis has been implemented in a telecom company's development department.

An environmental review has been carried out at FORIA AB, a transportation- and machine service company, to analyze the company?s environmental aspects from the transportation segment. This report describes the essential background and the methods of identifying and evaluate the environmental aspects. It also describes how the work with the environmental aspects often vary between different actors. The design of the ISO 14001 is intentionally broad in order to apply on all sorts of activities and organizations.

The study was performed for the Swedish Regional Forestry Board in Södra Götaland. The study examines broadleaf plantations on former farmland that were planted between 1991 and 1996 with subsidy payments for conversion of farmland into forest. In particular, the study reviews forests planted in 1991-92 and 1994-96. In the early 1990s, Swedish agriculture was deregulated and direct subsides to farmers ended. The Swedish state instead granted farmers financial support and offered incentives for conversion of farmland and investments in order to make their unproductive land productive. The state supported conversion of farmland to broadleaf forest, forest for energy biomass production, or establishment of wetlands on former farmland. The County Administrative Boards and Regional Forestry Boards together monitored the planting of broadleaf forests.

This thesis aimed to study the interaction between an educational technology system and its users and give suggestions for design improvements. The technology system is called EDIT (Educational Development through Information Technology) and has been developed and applied at Linköping University?s Faculty of Health Science. EDIT supports Problem Based Learning and enables scenarios to be presented through the World Wide Web. The study was divided into two parts.

C3LOOPS is an application for DJs and VJs based on surface interaction. A system is said to be based on surface interaction if it presents content on a two dimensional, endless surface that a user navigates through zoom, pan and incremental text filtering where processing is tightly coupled with the content without breaking the workflow. C3LOOPS is designed to encourage improvisation and collaboration. During improvisation changes occur rapidly. Allowing navigation through time as well as the two spatial dimensions of an interaction surface the possibility of unlimited undo operations opens up.