This paper discusses some concerns about Japanese gender identity as a construct and the subversive means to overthrow it. In my paper I claim that the eastern influences on Japan has created a gap between old and new gender- traditions and norms. This interspace is what the philosopher Judith Butler claims as the site for a possible gender transformation. As Butler claims gender identity to be a construct, I use her methods of understanding and subsequently queertheory, to investigate the construct of Japanese gender identity and also the norms that constitute a national identity. As I elaborate on this theory I use specific artworks from Morimura Yasumasa, Yoshiko Shimada and Bubu de la Madeleine and also the all-male theatre kabuki vs.

I chose to study how the Swedish Air force carries out their work with setting goals for their work to improve flight safety and compare this with how the Swedish nuclear power plant Forsmark performs their work with improving nuclear safety. The study showed that both organisations have a lot to improve on in their ways of how to work. Especially when it comes to engaging the employees in the process, both in letting the employees be a part of coming up with areas to work on and in letting the employees evaluate which progress that has been made. It also showed that both organisations need to improve their methods for evaluating the work that has been done. This is especially important for the Air Force which evaluates on many levels and locations and did not have a set standard for how to conduct the evaluation.

The thesis work has been carried out at Volvo Aero Corporation (VAC) in Trollhättan. VAC has entered a partnership as developing and producing partner with engine manufacturer Pratt & Whitney and is currently at the starting phase of producing the turbine rear frame (TEC) to the engine PW1000.The purpose of this study was to create a report on process level that describes the conditions and the potential with PW1000 TEC to reach the product cost calculation taking into account lead times and describe alternative method solutions.The report describes a comparison between the present flow (2012), a flow based on product cost calculation (2016) and a potential flow (2016). The work has mainly been based on acquiring the knowledge and information available to inspect the present flow; this has been done by workshop observations, meetings and gathering of the information that is available on the work site for the PW1000 TEC.The information obtained has been merged into an Excel document, called Roadmap. It serves as a roadmap with current situation as the start and the potential flow for 2016 as the goal. With the roadmap as a tool, assumptions have been taken considering the flow and how it will change, where processes have been eliminated, reduced or marked as a problem..

A constantly increasing number of magazines are using the Internet as a business channel. One of these is Allt om Mat (All about Food). Together with expressen.se, Allt om Mat developed a food website, alltommat.se, which was introduced at the beginning of 2008. In this essay we investigate how alltommat.se developed its service concept. Further, we look at how this development has influenced and been influenced by relations among the three actors and the users.

In today?s society the average person is flooded by information from everywhere. This is in particular the case when using the Internet; consider for a moment the fact that a decent search engine at this moment scans 8 058 million homepages. For a user that repeatedly comes back to the same site, the case is often that they know what they are looking for. The problem is to isolate the important information from all the other information embedding it.We would like to state that we have found one possible solution to this problem, where the user himself can define what information he is looking for at a specific server, then scan the server when visiting it with his browser.

In Scandinavia the general idea of the Bronze Age society is that it was organised as chiefdoms. The model for what they looked like is taken from the anthropological studies of the Polynesian chiefdoms. The aim of my study is to investigate a Scandinavian Bronze Age feature, known as cairns mainly containing fire-cracked stone. This is compared with how people in different Polynesian chiefdoms, looked at similar remain. This is done to get a background for new ways of interpretation of such remains.

The agricultural sector is currently highly dependent on fossil fuels, with diesel beingmost prominent. There are however both historical and modern alternatives thathave not been subject to enough evaluation to disregard them as suitable alternative.This report aims to theoretically investigate the feasibility of converting aconventional diesel driven tractor to run on electricity, delivered via a cableconnected to either the main power grid or on-site electric production, such asphotovoltaic. Delivering electricity to the machine via a cable is a method withhistorical roots in the early 20th century and in the present day mining industry.The economic and technological potential of the technique are evaluated, along withthe examination of several different motor powers, voltages, losses and constructionideas. The report finds the technique to be both possible as well as long termeconomically and environmentally beneficial. To realise this method however, somedeviations from the present methods of agricultural farming must be made,considering the more advanced driving patterns, the limited mobility and therequirement for extra driver awareness.

This thesis analyses the decoration on the pots of the Pitted Ware Culture on Gotland. The pottery from this period is richly decorated with various ornaments, the most common are the pits but other types of decoration occur. The purpose of this study is to get an insight into what the patterns meant to the people that made and used them and what role these may have played in their lives. The author will analyse the decoration on potsherds found from the three Pitted Ware sites of Visby, Ajvide and Hemmor on Gotland. This will be used in a comparative analysis to investigate if differences and/or similarities of the pattern occur between and among the sites.

This examination work aims to describe how a supply chain around the biggest pellets factory in Sweden will be configured in a logistic perspective. The plant and associated infrastructure are in the building phase and will have production start on the 2 November 2009. The key question that is set in this examination work is to recognize the logistic processes which are essential for an effective flow of materials and information that link the source of supply with the ultimate customer. In order to get the answer, a flowcharting of these supply chain processes is required for understanding the pipeline activities such as input and storage of raw material, the production system and the output of pellets to the customers. The basis for this supply chain map is a model-based representation of these logistic processes and activities that are involved around the pellets factory.

Use of lighting is crucial to make public urban places available during dark hours. Landscape architects participate in planning of lighting, but during our education there is very little taught on the subject. Through this study we approach the subject of lighting by looking into lighting methods for urban plant materials during winter. In this thesis we look into ways to emphasize the visible characters and experiences of urban plants during winter season using light. Target audience are landscape architect students and landscape architects without knowledge of lighting. The part of the thesis that describe basic conditions for, and visual characters of plants can be useful to lighting designers without knowledge in this subject. Working methods used were the following: ? Pre-study about light and lighting techniques through literature and dialogues. ? Compiling important visual winter plant characters through photography and literature. ? Outdoor light experiments with plants.

AbstractThe urgency to find alternative fabrics to conventionally produced cotton is increasing as vast amounts of agrochemicals are used and a lot of irrigation is required. In this literature survey the potential of organic cultivation practices to produce highly qualitative hemp fibre, suitable for the textile industry, was investigated. The definition of a fibre in the textile context as well as of the qualities that are essential for a textile fibre was necessary as a base for the discussion in this thesis. The quality parameters looked at were fineness, strength, length, friction, and colour. The impact of external growth factors and plant development on these quality properties are discussed.

Människans utsläpp av miljö och klimatpåverkande växthusgaser har ökat i snabb takt de senaste hundra åren. Fler varor produceras, konsumeras och transporteras över hela jorden för att uppfylla de krav människor har på sin levnadsstandard. Livsmedelsindustrins roll i utsläppen är betydande, speciellt köttproduktionen, som står för 18 procent av världens totala växthusgasutsläpp. Genom att minska den mängd kött som ingår i människors måltider och gå mot att äta mer växtbaserat, som inte innehåller köttprodukter, kan matens miljöpåverkan minska. Ett viktigt område är offentliga matserveringar, vad som serveras där har en inverkan på människors matvanor och deras syn på mat.

This is a master thesis from Uppsala University in collaboration with B Locket AB (more known as www.blocket.se). B Locket AB is a large ad-company from Sweden, located in Stockholm.Search engines on the market today are becoming more and more complex. When they were first introduced, they only had one function and that was to produce search results containing the string that the user had typed. Today, users want it to be able to spellcheck, produce more results and sort search results on specific fields as well. Preferably, all these features should not affect the performance as a whole.The reason to why these demands have come up is that users are getting more and more used to internet services as a whole and they want everything to be as easy as possible.The user ability has become a substantially more important area in the computer industry and this needs to be taken into account when it comes to B Locket AB and its search engine.

The construction industry depends on functioning logistics; if the logistics isn?tworking the construction site will risk to be interrupted due to material shortages orproblems with deliveries. Despite this, the construction industry is battling logisticproblems daily. This problem is very time consuming and costly for the companies.These theses are written for Peab Bostadsproduktion and investigate if it is possibleto focus on logistics earlier in the building planning process to reduce the problemsthat occur. Peab has partnerships with three companies that could be helpful for themin the work of reducing logistic problems.

The Latvian building company Laval un Partneri Ltd (Laval) posted Latvian construction workers at the rebuilding of a school in Vaxholm in autumn 2004. Because the company refused to sign a collective agreement with Svenska Byggnadsarbetareförbundet (Byggnads), which is the Swedish trade union for constructions workers, Byggnads put the construction site under a boycott. Next Laval sued Byggnads for damages in the Swedish Labour Court (AD) because Laval considers the boycott as well as Byggnad´s demand that Laval signs a collective agreement incompatible with EC Law. AD has now demanded a preliminary ruling from the European Court of Justice (ECJ). While waiting for the preliminary ruling from the ECJ, several important questions of principle stand unanswered.