The purpose of this thesis has been to develop a tool for modelling and simulating the nuclear plant Ringhals 3. The model should be used to improve the knowledge on the dynamics of the plant. Ringhals 3 is being upgraded to produce more power and a tool for analyzing the new operating conditions is needed.The work in this thesis has consisted of improving and developing an existing model of Ringhals 3 made with the modelling tool Dymola. The model has been validated by comparing the results of a simulated house load transient with data from the actual plant. Validation shows good agreement with data from the real plant.

The purpose of this thesis has been to develop a tool for modelling and simulating the nuclear plant Ringhals 3. The model should be used to improve the knowledge on the dynamics of the plant. Ringhals 3 is being upgraded to produce more power and a tool for analyzing the new operating conditions is needed.The work in this thesis has consisted of improving and developing an existing model of Ringhals 3 made with the modelling tool Dymola. The model has been validated by comparing the results of a simulated house load transient with data from the actual plant. Validation shows good agreement with data from the real plant.

In connection with Henriksdals wastewater treatment plant (WWTP) a smaller plant is situated called Sjöstadsverket where new methods for wastewater treatment are tested and evaluated in different process lines. On one of the lines experiments with enhanced biological phosphorous removal (EBPR), have been carried out to evaluate if it is a good alternative to traditional chemical phosphorus removal. This thesis evaluates the results from the experiments conducted during fall 2005.The incoming water from Hammarby Sjöstad consists of only household wastewater, which gives a wastewater with high concentrations of nutrients and organic carbon. This is partly positive, because one of the limiting factors for effective biological phosphorus removal is the lack of easily biodegradable organic carbon. The high concentrations of ammonium and phosphorus demand a high reduction to achieve the requirements of outgoing concentration.To optimize the process experiments with different recirculations and different aeration techniques have been made.

This paper appeals to professionals working with green questions. It intends to create a discussion about which plant species that can be established in a fieldlayer of a naturelike planting on fertile agricultural land. To initiate the essay, a studie of which values that can be connected with an establishment of a fieldlayer was performed . A part of Tor Nitzelius Park in Alnarp, a so called naturlike planting on fertile agricultural land, was used as a model for the choice of species. With the aid of soil values, photos and a list of current species, interviews with four ecologists were performed.

The purpose of this thesis has been to develop a tool for modelling and simulating the nuclear plant Ringhals 3. The model should be used to improve the knowledge on the dynamics of the plant. Ringhals 3 is being upgraded to produce more power and a tool for analyzing the new operating conditions is needed.The work in this thesis has consisted of improving and developing an existing model of Ringhals 3 made with the modelling tool Dymola. The model has been validated by comparing the results of a simulated house load transient with data from the actual plant. Validation shows good agreement with data from the real plant.

The purpose of this thesis has been to develop a tool for modelling and simulating the nuclear plant Ringhals 3. The model should be used to improve the knowledge on the dynamics of the plant. Ringhals 3 is being upgraded to produce more power and a tool for analyzing the new operating conditions is needed.The work in this thesis has consisted of improving and developing an existing model of Ringhals 3 made with the modelling tool Dymola. The model has been validated by comparing the results of a simulated house load transient with data from the actual plant. Validation shows good agreement with data from the real plant.

The purpose of this thesis has been to develop a tool for modelling and simulating the nuclear plant Ringhals 3. The model should be used to improve the knowledge on the dynamics of the plant. Ringhals 3 is being upgraded to produce more power and a tool for analyzing the new operating conditions is needed.The work in this thesis has consisted of improving and developing an existing model of Ringhals 3 made with the modelling tool Dymola. The model has been validated by comparing the results of a simulated house load transient with data from the actual plant. Validation shows good agreement with data from the real plant.

Phosphorus is the single most potent contributor to eutrophication of freshwater and has also been shown to contribute to the toxic algae blooms in the Baltic sea. The dynamics and paths of losses of phosphorus from arable lands are not fully understood. It is known that phosphorus can be lost directly from plant material to water. In studies where plant material has been subjected to several freeze-thaw cycles, large amounts of phosphorus have been lost. Most studies have been conducted under field conditions, with many factors effecting the measured losses of phosphorus, such as weather and type of soil. This study was performed in a controlled environment without the presence of soil. Instead of soil, small glass beads were mixed with the plant materials in vessels, to make possible homogeneous leaching with water through the mixture of glass beads and plant materials. In this study, clover, ryegrass and dry straw were cut to pieces, approximately 2 cm long.

The purpose of this thesis has been to develop a tool for modelling and simulating the nuclear plant Ringhals 3. The model should be used to improve the knowledge on the dynamics of the plant. Ringhals 3 is being upgraded to produce more power and a tool for analyzing the new operating conditions is needed.The work in this thesis has consisted of improving and developing an existing model of Ringhals 3 made with the modelling tool Dymola. The model has been validated by comparing the results of a simulated house load transient with data from the actual plant. Validation shows good agreement with data from the real plant.

The purpose of this thesis has been to develop a tool for modelling and simulating the nuclear plant Ringhals 3. The model should be used to improve the knowledge on the dynamics of the plant. Ringhals 3 is being upgraded to produce more power and a tool for analyzing the new operating conditions is needed.The work in this thesis has consisted of improving and developing an existing model of Ringhals 3 made with the modelling tool Dymola. The model has been validated by comparing the results of a simulated house load transient with data from the actual plant. Validation shows good agreement with data from the real plant.

Hammarby Sjöstad is a new district in southern Stockholm. A main objective with the Sjöstad project was to halve the environmental impact compared to other construction work. The environmental goals involve a halved water consumption rate, a local treatment of storm water and trials aiming to extract nutrients from the waste water. Sjöstadsverket is an experimental treatment plant used for testing new treatment processes for domestic waste water from Hammarby Sjöstad. The results are to be compared with the conventional process used at Henrikdals treatment plant today.

This thesis discusses the global regime complex concerning the management of plant genetic resources for food and agriculture, and how different regimes concerning these resources cooperate or stand in opposition to each other. Because of changes in US patent law and the establishment of TRIPS, patent claims over plant genetic resources has increased dramatically globally. This, amongst other things, in turn has lead to the development of CBD which in turn lead to the creation of access and benefit laws in many countries. To create a free flow of genetic resources for food and agriculture the ITPGRFA, with its multilateral system, were negotiated. The aim of this thesis is to investigate which consequences the regime complex concerning plant genetic resources for food and agriculture can have on the rights of small farmers, agricultural research and food security in the global South.

In two feeding experiments Bacillus induced priming of plant defense was tested for its effect against the generalist insect pest Spodoptera littoralis. The main hypothesis for the study was that Bacillus induced priming would enable the plant Arabidopsis thaliana to defend itself better against this insect herbivore since this priming seems to involve jasmonic acid, known to be important for plant defense to insects. A secondary objective of the study was to examine if any differences in a primed defense capability could be seen between different natural genetic variants (ecotypes) of A. thaliana reflecting habitat differences in pest pressure. The methods used for plant cultivation and Bacillus inoculation were aimed at reflecting conditions that can be expected in an agricultural cropping system. This meant that all plants were cultivated in soil, and the feeding experiments were conducted with the plants growing intact in the soil system.

The purpose of this thesis has been to develop a tool for modelling and simulating the nuclear plant Ringhals 3. The model should be used to improve the knowledge on the dynamics of the plant. Ringhals 3 is being upgraded to produce more power and a tool for analyzing the new operating conditions is needed.The work in this thesis has consisted of improving and developing an existing model of Ringhals 3 made with the modelling tool Dymola. The model has been validated by comparing the results of a simulated house load transient with data from the actual plant. Validation shows good agreement with data from the real plant.

The purpose of thesis was to investigate and compare how two companies within pharmaceutical industry and nuclear power industry are currently working with quality development regarding continuous improvement and Lessons Learned in business processes. In addition, a simple comparison was made with the automotiveindustry.McNeil AB are improving their processes continuously and are according to the findings of this report performing well in their pursuit of world-class pharmaceutical production. They have a well functioning process regarding improvements proposed in weekly improvement meetings engaging all employees. However, during interviews it was made clear that the functionality of the process which administer improvement proposals generated in addition to, or beside the weekly improvement meetings, were inadequate. McNeil AB is proposed to administer this through an IT solution instead of by paper and e-mail, that simplifies the process of adding, implementing and follow up an improvement proposal.The nuclear power plant Ringhals AB recently made major improvements in their business processes as well as the plant itself.