In Dar es Salaam, as in many cities in developing countries, green areas are decreasing due to the fact that the growth of buildings, infrastructure and services has become a priority. As the population increases more buildings and infrastructure are needed and much of the building activity takes the form of uncontrolled settlements, which encroaches the public green space. Dar es Salaam has approximately three million inhabitants, of which about 70 percent are living in informal settlements. The aim with this study is to make a design proposal for a park and recreation area where the Msimbazi river basin in the centre of Dar es Salaam is today. The basin consist of a few playing fields, footpaths and some urban farming, but apart from this it mostly consists of unused grasslands, swamps and forests. Because it is an unsafe place and badly connected to the rest of the city infrastructure, it has become a barrier. The annual flood combined with the constant still shallow water creates a good breading ground for malaria mosquitoes.

The Swedish pulp and paper industry meets higher demand for energy efficiencyi mprovements with increasing energy prices and changes in the Swedish renewable energy certificate system. One action of energy efficiency improvement is by using secondary heat, that otherwise would have been treated as waste heat, for use in a system with lower temperature demands. The aim of this Master´s thesis is to identify possible secondary heat sources in a typical Swedish pulp and paper mill and to investigate what economic benefits the secondary heat will provide when being used for pre heating of wood chips to a kraft digester.The Master´s thesis focuses on three secondary heat sources; dry warm air, warm water and moisture saturated warm air located inside the pulp or paper mill. Two types of kraft digesters are simulated within this study, a typical Scandinavian digester and a modern twin vessel steam phase digester.Due to quality aspects and low temperature level drying is the drying technology with dry warm air rejected. Using warm water in direct contact with wood chips increases the quantity of water to the evaporation plant and thus reduced pulp or paper production and is therefore also rejected.

I Sverige produceras varje år grovt uppskattat ca. 1,5?2,0 miljoner m2 industrigolv av betong [1]. Resultaten är varierande och det vanligaste felet hos dessa golv är sprickor [2]. I sprickorna letar sig vatten och i vissa fall klorider ned och förorsakar armeringskorrosion.

Sammanfattning En bra grund är en grundläggande förutsättning för varje husbyggnation.  Den vanligaste grundläggningsmetoden är platta på mark som i sitt grundutförande kräver plant underlag. En konsekvens av rationaliserade byggmetoder har blivit att man vid grundläggning på berg spränger en plan yta att förlägga grunden på. Att spränga i berg skapar irreversibla skador. I Sotenäs kommun, en kommun belägen på Bohusläns kust, finns berg som genom sin särprägel blivit klassade som riksintresse enligt Miljöbalken. En tradition i Bohuslän är att anpassa bebyggelsen efter naturens förutsättningar, vilket bland annat resulterat i grunder byggda efter bergets formationer.

This MA thesis analyzes how the protagonists and the narrative structure relates to ?the Child? as a linguistic/cultural construction in Mare Kandre?s early authorship (1984-1991). A thematic of children portraits defines this period of Kandre?s writing, which consits of the following works: In a Different Country (1984), The Annunciation (1986), Bübin?s Kid (1987), The Burning Tree (1988) and Aliide, Aliide (1991).Linguistic components, such as the word ?child?, the name ?Kid? and a reconstruction of the concept of childhood, holds an actuate position in these narratives when they first appear in direct relation to the protagonists. This suggests how generally accepted categories and concepts consciously are at work in Kandre?s writings.

SUMMARYInventory of raw materials holds an important role in companies within the manufacturingsector. The inventory works as a buffer that secure the supply of materials to the productionunit. The aim of the inventory is to ensure that the company is able to meet the customers?demands despite fluctuations and variations in the material flow. The size of the warehouseand the layout are physical limitations for the quantity of articles that can be stored.

This study is made on assignment by the local board of forestry in Skåne, Blekinge and Halland. The change of the forest law 1994 brought a new type of management plan. A more active planning was introduced in order to equate the environment goal with the production goal. The purpose with this study is to give a better picture of how planning for nature conservation in production forest is made and to develop support for selection of silviculture methods for stands with combined goals. With combined goals means production forestry with a reinforced consideration to both nature and culture, called PF-classified stands. This was done by: ? Describing silviculture models from the literature that are possible to use for stands with combined goals. ? Describing silviculture models that is used in practice in stands with combined goals. ? Describing how the classification of stands with combined goals is used. Which means, were in the terrain, with which frequency and in which type of forest PF-classification is used. ? Comparing differences and similarities of theoretical and practical used models. The study was done partly as a literature study and partly as an interview study of forest planners.

Charles Hartshorne (1897-2000) was a religious philosopher. He adopted and developed the cosmologic thinking and concept of God from the philosopher Alfred North Whitehead, he was also influenced by Heidegger, Spinoza and other philosophers. According to Whiteheads religious philosophy Hartshorne claimed that there is a dualistic transcendence within the Godhead. A dualistic transcendence where one unity/transcendence of God is abstract, outside the creation and time and therefore is eternal. The other unity (or transcendence) is inside time and creation and closely in process to it .

Abstract. Title: Supply Chain Optimization ? for Sourced Production. Authors: Patricia Möller and Andreas Paulsson. Tutors: Jan Eskil Hollen ? Business Developer, Lilleborg as, Orkla, Everth Larsson ? Department of Industrial Management and Logistics, Division of Engineering Logistics, Lund University, Carl-Henric Nilsson ? Department of Economics and Business Administration, School of economics and management, Lund University.

SUMMARYInventory of raw materials holds an important role in companies within the manufacturingsector. The inventory works as a buffer that secure the supply of materials to the productionunit. The aim of the inventory is to ensure that the company is able to meet the customers?demands despite fluctuations and variations in the material flow. The size of the warehouseand the layout are physical limitations for the quantity of articles that can be stored.

The town square is an important public space and is often described as the city´s living room. By creating a lively city center a sense of security is developed among the citizens which makes them wanting to use the town square regardless the time of the day. One important meeting point in Gävle is the centrally located Stortorget, sited between Drottninggatan and Nygatan. The town square went through an extensive renovation followed by both positive and negative reactions among the City´s inhabitants.  The aim with the study was to investigate the main walking paths and meeting points as a planning support to Gävle Municipality in their work with a new city plan. By studying the pedestrian movement patterns at Stortorget, Nygatan and Drottninggatan, the main walking paths and meeting points during all hours of the day was obtained.

My thesis is a combination of theory and practice, where theory is meant to create a context and a background for my interpretation proposal. I wanted to ?access? the ideas that are always in the background of the reasoning which underlies both planning in a larger scale, and the design of a place. I wanted to make a ?work of ideas.? In the process of shaping the proposal, I wanted to be deleted from the site itself.

Hallstaviks papermill is an industry plant within Holmen Paper. Hallstavik is a mechanical mill and produce newspaper and journal paper. During year 2000, Hallstavik used approximate 1.200 m3f spruce, either as logs or chips from sawmills. Due to that the production is running continuously the mill also needs raw material at the same rate. At some periods the supply of raw material cannot keep up pace.

Ocean Thermal Energy Conversion, OTEC, a technology using the temperature difference between cold deep seawater and warm surface water, can extract the work in the form of electricity. OTEC gives also synergies of drinkable fresh water. The temperature difference has an impact on the efficiency of the technology, which means that the feasibility of OTEC is geographically limited. The project intends to explore the possibility of replacing the atoll Tarawa?s present electricity generation with an OTEC plant and to explore synergies. In the present situation all of Tarawa?s electricity is generated by fossil fuels.

The safety and safety work on OKG, Oskarshamns Kraftgrupp, is supervised by SKI, Swedish nuclear power inspectorate. The task of SKI is to inspect that the nuclear power plants of Sweden runs in a safe way. The proprietor of the permit who runs nuclear power plants has the responsibility to maintain the required safety to run a plant. SKI publishes a number of statue books that OKG has to meet to be able to run the plants. SKI recommends in SKIFS 2 004:1, that OKG work with the safety requirements of IAEA.