The smelting process at Sapa Profiler AB in Sjunnen generates large quantities of waste heat which is absorbed by the cooling water when the aluminum is cooled down. This paper is the result of a Master?s Degree Project aiming to present the conditions for recycling the waste heat. The cooling water absorbs the heat from the aluminum at an average rate of 600 kW and the paper shows that it can be used to replace electrical power consumption for heating the production plant?s facilities.

I chose to study how the Swedish Air force carries out their work with setting goals for their work to improve flight safety and compare this with how the Swedish nuclear power plant Forsmark performs their work with improving nuclear safety. The study showed that both organisations have a lot to improve on in their ways of how to work. Especially when it comes to engaging the employees in the process, both in letting the employees be a part of coming up with areas to work on and in letting the employees evaluate which progress that has been made. It also showed that both organisations need to improve their methods for evaluating the work that has been done. This is especially important for the Air Force which evaluates on many levels and locations and did not have a set standard for how to conduct the evaluation.

This examination work aims to describe how a supply chain around the biggest pellets factory in Sweden will be configured in a logistic perspective. The plant and associated infrastructure are in the building phase and will have production start on the 2 November 2009. The key question that is set in this examination work is to recognize the logistic processes which are essential for an effective flow of materials and information that link the source of supply with the ultimate customer. In order to get the answer, a flowcharting of these supply chain processes is required for understanding the pipeline activities such as input and storage of raw material, the production system and the output of pellets to the customers. The basis for this supply chain map is a model-based representation of these logistic processes and activities that are involved around the pellets factory.

Use of lighting is crucial to make public urban places available during dark hours. Landscape architects participate in planning of lighting, but during our education there is very little taught on the subject. Through this study we approach the subject of lighting by looking into lighting methods for urban plant materials during winter. In this thesis we look into ways to emphasize the visible characters and experiences of urban plants during winter season using light. Target audience are landscape architect students and landscape architects without knowledge of lighting. The part of the thesis that describe basic conditions for, and visual characters of plants can be useful to lighting designers without knowledge in this subject. Working methods used were the following: ? Pre-study about light and lighting techniques through literature and dialogues. ? Compiling important visual winter plant characters through photography and literature. ? Outdoor light experiments with plants.

AbstractThe urgency to find alternative fabrics to conventionally produced cotton is increasing as vast amounts of agrochemicals are used and a lot of irrigation is required. In this literature survey the potential of organic cultivation practices to produce highly qualitative hemp fibre, suitable for the textile industry, was investigated. The definition of a fibre in the textile context as well as of the qualities that are essential for a textile fibre was necessary as a base for the discussion in this thesis. The quality parameters looked at were fineness, strength, length, friction, and colour. The impact of external growth factors and plant development on these quality properties are discussed.

Människans utsläpp av miljö och klimatpåverkande växthusgaser har ökat i snabb takt de senaste hundra åren. Fler varor produceras, konsumeras och transporteras över hela jorden för att uppfylla de krav människor har på sin levnadsstandard. Livsmedelsindustrins roll i utsläppen är betydande, speciellt köttproduktionen, som står för 18 procent av världens totala växthusgasutsläpp. Genom att minska den mängd kött som ingår i människors måltider och gå mot att äta mer växtbaserat, som inte innehåller köttprodukter, kan matens miljöpåverkan minska. Ett viktigt område är offentliga matserveringar, vad som serveras där har en inverkan på människors matvanor och deras syn på mat.

Sydkraft Vattenkraft AB owns and operates the Traryd hydropower plant, located in the river Lagan in the southern part of Sweden. The gravity dam is classed according to RIDAS guidelines (Hydropower Industry Dam Safety Guidelines) as a class 1B dam. This means that the dam must discharge a class 1-flow which has a return period of 10 000 years. The inflow into the dam has been calculated in an earlier report to 495 m3/s, with a waterline at an elevation of 126, 3 meters above sea level. The gravity dam has a discharge system with two rectangular weirs, which results in a smaller discharge than the necessary 495 m3/s.

The aim with this study was to collect fundamental information, and to plan, a windpower farm in Juddhult , Småland in southern Sweden. The goal is to collect the bestavailable projecting planning support. The pieces of this projecting planning supportthat will be presented is; Environmental Consequence Description (MKB), productioncalculations, comparisons between different plant types, economic calculations, evaluatethe economy and give some farm design suggestions. The imagined wind farm will belocated in forest environment and which may cause a number of new problems. Specialinterest that will be affected, where special consideration because of the forestenvironmental is requested is, hunting, wetlands, ancient monuments and windturbulence.

Electrical stunning is the method that has been used in Sweden to stun broilers prior to slaughter. However, for reasons of animal welfare and meat quality, research has been made in the EU to develop new stunning methods. Gas stunning is now regarded as the best alternative. In this study literature has been reviewed with focus on different gas stunning systems and observations have been made at two different slaughterhouses regarding animal welfare before, during and directly after stunning. At one slaughter plant carbondioxide was used in a two-stage system where the birds were standing on a conveyer belt during the stunning procedure.

This thesis has been carried out to the Technology Group at industrial plant Tube Mill2012, which belongs to the Sandvik AB. Technology Group is a unit that takes care ofall requirements and suggestions regarding investigations, test runs and designmodifications. The main objective is to identify and analyze the existing initializationprocess to see where improvement opportunities exist and to come up withsuggestions for improvement, supported by previous research and literature. Anextensive literature search and case study has been conducted to provide a solidfoundation to refer to during the work. Completing the interviews and the workshopgave a clear picture of their unstructured work and approach, how the lowrequirements on the received orders caused problems for the group as well as thelack of a standardized resource allocation method provides major delay factors.Solution proposal then became a very easy process model in five steps with all theinformation gathered in one place.

This report was written as a final thesis within the Department of forest economics at the Swedish University of Agricultural Sciences as a completion of the M.SC Forestry programme. The aim of this study was to create a model that, with respect to given stock levels, temperature, fuel usage and fuel price, would identify the optimal levels for purchase of bio fuels, optimal levels of incineration of bio fuels and the sum of the present values of all costs. The model would be applicable for a larger district heating plant. Data regarding temperature were received from SMHI. Information considering fuel prices was taken from the Swedish Forest Agency and the facts about fuel usage were collected from a large district heating plant, located in the southwest of Sweden. For the temperature, a sinus curve was adapted to describe the temperature over a year.

This bachelor?s thesis studies Carl Str?mbergs ?ppeltr?dg?rd, a private garden consisting of a large number of apple trees and varieties. The garden is located outside ?rebro, in N?rke, and is owned by a unit owner association whose goal is to preserve and determine the varieties. Through interviews, articles, site visits and documents from Carl Str?mberg, the purpose have been to get an understanding of who Carl Str?mberg was, how he collected the apple varieties and how that process was affected by the climate amongst apple growing and pomology during that time.

To achieve the Government's milestones for 2018, which means that 50 % of food waste shall be separated from household waste and undergo biological treatment (composting or anaerobic digestion).   Hultsfred, Högsby and Vimmerby are three adjacent municipalities of Kalmar, county Småland. During 2012 and 2013 analyzes were performed on their household waste to determine its composition. The household waste is currently collected in one fraction. The work, examines how much food waste the household waste contains. From the amount of food waste, the biogas potential is examined - how much food waste biogas generates and how much energy it corresponds to.   Food waste is broken down by microorganisms under anaerobic conditions (anaerobic digestion) in a biogas plant.

The higher status homestead called Kullen is located on top of a small hill just outside of Hova in V?stra G?taland. The house stands on a plateau surrounded by a stonewall. Aerial photos from the 1960?s shows what looks like a big parklike garden behind the house, with a gravel walk cutting through on the length of the garden up to the house.

AbstractThe dependency of fossil fuels in the transport sector causes large emissions of carbondioxide. This problem can we reduce by using vehicle gas from digested solid manure and leftover of pasture. I have studied the potential for this in the county of Västernorrland. Thepurpose is to investigate how much vehicle gas that can be extracted.One central, large scale digestion and upgrade plant should be placed in Härnösand. Theamount of pasture and manure that is economical and practical available is enough to produce2,7-3,5 millions Nm3 vehicle gas.