Transportation of pigs might be a welfare problem. Stress during and after transportation can negatively affect the meat quality or cause carcass damages, which leads to major economic losses every year. The transportation chain can be divided into several stages; loading, transport and unloading. This literature review focuses on unloading of pigs from a transport. When arriving at an abattoir pigs can be fatigued and need to be as smoothly unloaded as possible.

The graduation essay has been carried out in co-operation with Kalmar Industries in Lidhult, Sweden. The purpose of our essay was to develop a complete construction solution on a hoist that could lift a laying wheel, lift it up and then turn it 90 degrees. After that the wheel shall be placed in a special holder.The background of the essay is a record of reports of damage wheels when they been incorrect lifted with a forklift. The hoist shall be used together with the same forklifts that manage the wheels today. Together with our instructor at Kalmar Industries we developed a requirement specification and from that we got free hands.However this was not the main task from the beginning, then a simular hoist should be develop but used directly in the assembly workshop without using a forklift.We started to find principle solutions that later was evaluated against the requirement specification.

The objective of this thesis is to make a training material for KSU, which shows how radiation affects the different electronic components in a radiological environment.All electronic systems in the presence of high ionizing radiation can experience difficulties and be destroyed.This influence may compromise the control system and thus the safety of a nuclear reactor plant.To achieve this objective requires a description of electronic components and sensors, to better understand its function.This thesis will also show the possible solutions available that the author found interesting.Organizations such as NASA, CERN and ESA have worked to develop electronic components immune to radiation. Those organizations have also developed a test protocol that guarantees to a certain extent the security of electronic components in a radiological environment.Since we know how the material reacts with the radiation, it could develop a material that can be resistant to radiation or like CMOS technology has proposed, to reduce the component to avoid the storage of charge in the oxide.Another solution can be the GRAPHENE. Its features will revolutionize the electronics and provide answer to the radiation problems, Graphene will replace Silicium and the electronic components will only have a few nanometers dimensions so the oxide area also reduces, and in this way avoid the known problem of storage of charge..

Detta examensarbete innehåller en beskrivning av växter som under olika förhållanden trivs och kan växa i områden med delvis eller hel skugga. Beskrivningarna av växterna är översiktliga och ämnar inte informera läsaren grundligt om växten utan enbart om enklare fakta för att kunna planera sin trädgård. Jag har valt att inrikta mig på markförhållande beroende på klimatet (torr, fuktig och blöt mark) och markförhållande beroende på substratet (sand, lera, humus och torv) samt temperaturbundna växter. Därefter följer en slutsats där jag reflekterar över mitt arbete. ***********This thesis contains a description of plants that thrive and can grow under different conditions in areas with partial or full shade.

The smelting process at Sapa Profiler AB in Sjunnen generates large quantities of waste heat which is absorbed by the cooling water when the aluminum is cooled down. This paper is the result of a Master?s Degree Project aiming to present the conditions for recycling the waste heat. The cooling water absorbs the heat from the aluminum at an average rate of 600 kW and the paper shows that it can be used to replace electrical power consumption for heating the production plant?s facilities.

The purpose of this thesis is to identify the factors that drive efficiency and effectiveness in technical development projects performed at A?F?s department of product development. In addition to identifying and analyzing these factors, the thesis also analyzes what needs to be taken in to account in order to implement a measurement system that is able to both monitor and control the identified factors.The thesis has been performed in a qualitative manner. It is based on interviews with people from several different technological companies, within different lines of business, all of which are customers to A?F?s department of product development.The results show that there are seven critical factors for project efficiency and effectiveness.

Background: Due to outsourcing, the material flows in the telecom equipment industry have undergone major changes, which in turn has imposed new challenges for packaging supplier Nefab who delivers to the industry. In order to achieve market intelligence, Nefab wants to map the material flows, and investigate possibilities of further reusable logistical packaging systems.Purpose: The purpose of this thesis is to describe the typical features of the logistical material flows in a technically based, rapidly growing industry, and analyze the driving forces and obstacles, which influence the selection of logistical packaging system. Procedure: After developing a theoretical framework consisting of general logistical theories and theories related to logistical packaging, we have interviewed companies in the logistics channel of Ericsson Radio Systems.Results: We have found the main characteristics of material flows in our investigated industry to be Variations in Demand, Focus on Time-to-Customer, and Globalization of Logistics Channels. Regarding driving forces and obstacles in the selection of logistical packaging systems, we have identified Transportation Characteristics, Customer Demands, Quality, Handling & Administration, and Current Packaging System as important factors..

I chose to study how the Swedish Air force carries out their work with setting goals for their work to improve flight safety and compare this with how the Swedish nuclear power plant Forsmark performs their work with improving nuclear safety. The study showed that both organisations have a lot to improve on in their ways of how to work. Especially when it comes to engaging the employees in the process, both in letting the employees be a part of coming up with areas to work on and in letting the employees evaluate which progress that has been made. It also showed that both organisations need to improve their methods for evaluating the work that has been done. This is especially important for the Air Force which evaluates on many levels and locations and did not have a set standard for how to conduct the evaluation.

The analysis of acute phase protein serum amyloid A (SAA) has recently been brought into clinical use in veterinary medicine. Some of the difficulties with incorporating the SAA method in clinical practice have been the expensive and rather large equipment required for the method. Due to these difficulties only larger clinics can afford to use the SAA analysis.The company Equinostic has recently developed a smaller instrument that costs one-tenth of a larger instrument. The instrument is named EVA1 and has so far only been used to analyze SAA in horses.The aim of this study was to investigate if the EVA1 instrument could be used to analyze SAA in cats. This study included 24 serum samples from cat, which were first analyzed twice on the EVA1 instrument and then sent to the Strömsholm Referral Animal Hospital in Sweden where they reanalyzed the samples using a validated reference method.

The high viscosity of barley material makes starch isolation problematical using regular methods established for cereals. An adjusted starch isolation method has been set up for barley, based on fractionation and purification. The focus is on attaining truly representative isolates of six flour samples selected for widely differing characteristics within the research program BarleyFunFood (BFF). Beside establishment of the method, this diploma work aspires to serve the BFF with isolated material of sufficient yield valid for further starch characterisation. A pre study was conducted evaluating available wet mixing equipment, experimental conditions and mode of procedure.

Approximately ten people die every year at building sites in Sweden. Every year TheWork Environment Authority (Arbetsmiljöverket) receives 3200 accident reportsfrom the construction sector. The Swedish building contractor Skanska has the vision:?Zero accidents?. Only at Skanska Sweden, where this diploma work is preformed,350-520 accidents and mishaps are reported every year for the last 5 years.

The purpose of this thesis is to identify the factors that drive efficiency and effectiveness in technical development projects performed at A?F?s department of product development. In addition to identifying and analyzing these factors, the thesis also analyzes what needs to be taken in to account in order to implement a measurement system that is able to both monitor and control the identified factors.The thesis has been performed in a qualitative manner. It is based on interviews with people from several different technological companies, within different lines of business, all of which are customers to A?F?s department of product development.The results show that there are seven critical factors for project efficiency and effectiveness.

The main purpose with this MA thesis is to examine how visually impaired, disabled and people with dyslexia define service quality at the public library of Linköping. The method that has been used is focus group interviews. A focus group consists of four to eight people who are joined together, without knowing each other before, to discuss a certain subject. The aim is to get a wide spread of answers. A secondary purpose is to examine how this method works.

This examination work aims to describe how a supply chain around the biggest pellets factory in Sweden will be configured in a logistic perspective. The plant and associated infrastructure are in the building phase and will have production start on the 2 November 2009. The key question that is set in this examination work is to recognize the logistic processes which are essential for an effective flow of materials and information that link the source of supply with the ultimate customer. In order to get the answer, a flowcharting of these supply chain processes is required for understanding the pipeline activities such as input and storage of raw material, the production system and the output of pellets to the customers. The basis for this supply chain map is a model-based representation of these logistic processes and activities that are involved around the pellets factory.

Use of lighting is crucial to make public urban places available during dark hours. Landscape architects participate in planning of lighting, but during our education there is very little taught on the subject. Through this study we approach the subject of lighting by looking into lighting methods for urban plant materials during winter. In this thesis we look into ways to emphasize the visible characters and experiences of urban plants during winter season using light. Target audience are landscape architect students and landscape architects without knowledge of lighting. The part of the thesis that describe basic conditions for, and visual characters of plants can be useful to lighting designers without knowledge in this subject. Working methods used were the following: ? Pre-study about light and lighting techniques through literature and dialogues. ? Compiling important visual winter plant characters through photography and literature. ? Outdoor light experiments with plants.