The aim of this thesis is to describe the customer?s attitudes toward the contracting for availability, i.e., which factors are from the customer?s perspective necessary for the fulfilment of a supplier-customer agreement? Furthermore, the objective is to describe and analyse a supplier-customer relation in the Defence Industrial sphere.The present study has been carried out as a case study using an abductive approach. The thesis is based on a practical problem, i.e. which factors will be important to the customer when a contractor in the Defence Industry wants to increase its commitment of service, and how will their relationship change? The thesis is above all focused on generating knowledge that can lead to rapid and concrete measures and that can be used in the analysis of an increased industrial commitment but also as a case study of a problem of a more general nature in the Defence Industry.

In this project a simulator has been developed (in C++) with the purpose of illustrating how changes in environmental regulations, tax levels and other policy measures affect the composition of an energy system. The aim of the project was to investigate how energy companies? investment strategies are affected when changes in economic and environmental conditions occur. A standard scenario has been created based on current Swedish conditions, but the user can create new scenarios and set parameters freely. The user is tasked with building power plants to supply the city/region with district heating and electricity during a pre-set number of years. When the simulation is finished the result is graded in the following categories: economy, environment and quality. To evaluate the simulator three scenarios were created (?early 20th century?, ?reduced environmental control? and ?future?) in addition to the standard scenario and these were compared with each other by examining how a select group of power plants perform under the given conditions.

The aim of this thesis is to investigate if an automation of the manual packaging process at Legosan AB is profitable. Legosan AB, located in Kumla, performs subcontract work of dietary supplements and medical products to companies within Europe. The chapterportal robot is used in the other. As there are several options in the choice of packaging robot the suggestions of improvement are divided into two different designs. Other machines and equipment necessary for the different suggestions of improvement are showed and their measurements are presented.

Today digital guides are most frequently used by the museum and tourism industries. They are also used for education purposes. They make it possible to distribute information and have it easily accessible. In addition to written information they add sound, pictures and videos which lift the whole impression of the visited place to a higher level. A variety of systems currently in use today have been evaluated.

This report describes a Bachelor thesis work in which a robotised laser welding cell has been modelled and simulated for the purpose of making a presentation movie. The report shows that the work has been concentrated on making the movie from the modelling phase through the recording of the movie and ending up with the editing of the final presentation movie. A pre-study was made prior the Bachelor thesis work. In the pre-study a literature study was conducted about measurement and calibration of a welding cell. Measurement of almost all equipment in the entire cell was also conducted in the pre-study.

This report is commissioned by the Water and Sewage Agency in The City of Mariehamn, Åland. The basic aim is to investigate positive or negative effects of a relocation of the sewage pipe from a wastewater treatment plant, Lotsbroverket. The environmental licence of Lotsbroverket is to be revised and The Environmental Appeal Board at Åland?s Government and Administrative Board has made demands that several possible locations in an outer water area should be examined. The present location of the sewage pipe is in Svibyviken, which has been classified as an ?inner water area?.The objective of this work is to study to which extent the nutrient loading from Lotsbroverket influence the environmental conditions in Svibyviken, and to investigate the suitability of different locations of the wastewater pipe from Lotsbroverket.The way a coastal area looks, i.e., its morphometry, determines to a large extent its ecological characteristics.

The purpose with this bachelor thesis is to identify risks and insufficiencies concerning the production at WilloMaskin AB. The project is limited to only 4 machines, where theories as ?OEE? (overall equipment efficacy) should be illuminated and analyzed. The theory of ?Single Minute Exchange of Die? is also presented.The method used in this project is mostly based on qualitative studies but also quantitative studies are presented.

Earlier studies of musculoskeletal problems with milkers working in milking parlour operators have shown that it is a physically demanding occupation. The extremities that are most exposed are neck, shoulders, hands and wrists. Those systems that have been studied in present cases are fishbone and some tandem barns. There have been changes in the working environment during the past ten years. The mechanisation has been developed for the better with automatically removers of the milking units and vertically adjustable floors in almost every daily milking barn. In other hand the milk production are more industrialised and more related to stress today.

Approximately 20% of the milk within the udder of a cow is stored in the cistern and immediately available for milk removal, while activation of the milk ejection reflex is required for removing the remaining milk stored in the alveolar compartment. The aim of this literature review is to describe, evaluate and consider implications of the three different suckling activities that the calf displays during a suckling bout. In terms of milking, these phases are represented by pre-stimulation, stimulation during milking and post-stimulation. Pre-stimulation is commonly performed in order to induce the milk ejection reflex, whereby the hormone oxytocin is released and the alveoli in the secretory tissue are contracted. Time requirements regarding pre-stimulation must be considered in relation to lactation stage and milking interval.

I have chosen to work with drag hose system and try to find an alternative to spread manure with a usually tank system, see if you can make a profit and what advantage and disadvantage the system has. The purpose whith the project has been to try to make a system that can spread manure at better occasions than farmers do today and above everything make a financial addition. Today it is just a heavy work and takes a lot of time. I have counted on investment costs and carefully examined what equipment you need. I have not the technical details in my project, I have just tried to understand how it is to spread manure with drag hose system today. What is drag hose system? You put a hose in your manuretank, connect it to a pump that is driven by a traktor or stationary engine. You place a hose that reach the field were you are going to spread.

Wavecraft AB develops medical equipment for heating of organic synthesises. The heating is done with microwaves, which improves the process in both speed and accuracy compared to the more traditional methods where heating elements are used. This report discusses the developement of an automatic lid mechanism for one of Wavecraft's product prototypes. The company assumes that the final product will be integrated by customers into fully automated systems, and the upgrade from a manually to an automatically controlled lid is therefore an important step in the product's developement process.The first stage och the project was an idea generation process. The ideas generated here were organized into five different concepts of which the best one was selected through the use of a concept matrix.

One of the most common ways to produce heat and electricity in Europe today is by the incineration of waste or combustion of coal. These materials can be very sulfurous and during combustion sulfur dioxide is produced. This is an environmental and health related toxic substance which is why power plants have strict regulations on removing it from the flue gas. Sulfur dioxide is removed from the flue gas by adding a limestone reagent. The sulfur dioxide reacts with the limestone and the synthetic product obtained is ?Flue Gas Desulfurization gypsum?.

Denna rapport i form av examensarbete för utbildningsprogrammet Managing Technology and Business Projects, är en del i Volvos framtida produktions-/ produktstrategier.Uppsatsens syfte är att ur ett produktionsperspektiv understödja Volvo Construction Equipment i Braås i strävan mot en ökad modulindelning av ramstyrda dumprar, som en del i utvecklingsarbetet för en effektivare produktion. Resultat har uppnåtts genom analys av intern och extern benchmarking jämfört med den teori som finns inom ämnesområdet modulindelning. Huvudresultatet visar att teorin och verkligheten skiljer sig genom att modulindelning ska anpassas individuellt utifrån varje företag och inte fungerar som en generellt applicerbar process. Slutsatsen visar att Volvo CE i Braås måste utveckla en egen handlingsplan och kravspecifikation utifrån egna definitioner som är skräddarsydda specifikt för företaget.I rapporten presenteras förslag till ovanstående handlingsplan för modulindelning på Volvo CE i Braås..

Detta examensarbete är resultatet av en utredning av tvättning och rengöring av produkter som tillverkas på Volvo Construction Equipment Components AB i Eskilstuna. Arbetet är uppdelat på två huvudområden, tvättning i processen samt slutgiltig renhet. Skillnaderna mellan dessa är framförallt att det finns fastställda krav på den slutgiltiga renheten för artiklarna men en motsvarande märkning saknas för de olika tillverkningsstegen. Idag tvättas ungefär 70% av TMAs artiklar i en central tvättstation. I och med detta uppstår en hel del problem med ledtider och kvalitet.

The purpose of this thesis is to identify the factors that drive efficiency and effectiveness in technical development projects performed at A?F?s department of product development. In addition to identifying and analyzing these factors, the thesis also analyzes what needs to be taken in to account in order to implement a measurement system that is able to both monitor and control the identified factors.The thesis has been performed in a qualitative manner. It is based on interviews with people from several different technological companies, within different lines of business, all of which are customers to A?F?s department of product development.The results show that there are seven critical factors for project efficiency and effectiveness.