The purpose of this report is to find out which crops, that are good for strawfuel, and can be grown i the area around the city of Lund. The background of this report it that Lunds energy is planning to bild a biofuelheated thermal power station in Örtofta outside of Lund. I have in the report limited me to the crops hemp, whole crop (triticale), reed canary grass, elephant grass and jerusalem artichoke. I have through a documentary research checked the crops, cultivabillity in the south of Sweden, and how they should fit, in the Scanian crop sequence. Hemp is an annual crop which probably could manage in the Scanian crop sequence. Whole crop often triticale because of it´s high yield and low rate of shed seed. Could also fit into the crop sequence of crop in Scanian. Triticale is annual, and could be grown at the same kind of fields as used to wheat, whith is why it would be possible to grow it in Scania. Reed canary grass is a reedlike grass that is easy grown at most soils.

AbstractThe purpose of project is to study the possibility for Borås Energy & Environment to build and run a commercial ethanol production facility in Borås. The project also studies the technology for the production of ethanol using renewable energy, e.g. lignocelluloses with focus on two processes, svag-syra hydrolyse and enzymatic hydrolyse. The technology of the process is based of hydrolysation of biomass (hemicelluloses and cellulose) to sugar and extract it to ethanol. These two techniques will compare with each other to determine which of them that it?s more suitable for ethanol production.

The current state of knowledge indicates that there is more than one factor that initiates heartwood transition. This study supports its hypothesis on the theory that heartwood is formed by a fixed fraction of the annual growthring, 0,5 to 0,8 rings. To calculate heartwood volume modelings were carried out in four different pine stands with different spacings, 0,75, 1,25, 1,5 and three meters. The model indicates heartwood diameter (HWD) and is based on four explanatory variables, height (H), crown ratio (CR%), diameter breast height (DBH) and tree height (TH). The shifting plant spacing results in varying growth rate in the juvenile stage.

Through previous studies during my education, I have experienced that chemical deicing road salt is a known problem, mainly in southern Sweden. Road salt causes damage to the environment and also damage to vehicles and structures such as bridges, etc. Road salt causes vehicles and steel constructions to rust, leading to increased costs for repairs of damage to structures. Road salt also causes damage to the plants and the economy to suffer, when plant material and soil needs to be replaced. In order to get closer to a solution, I put up three questions.

The company Bergteamet, Boliden, Sweden, is installing ventilation shafts of the Garpenberg mine. For such work a platform is needed which you can stand on and work from. The Shaft Reinforcement Team at Bergteamet performs the installation work and is the sponsor of the platform. The project described in this report is performed at the department MEC, Mining Equipment Construction, which has been given the task to design and construct the platform, customized for the current shaft. After this the platform is manufactured and inspected at the workshop at Bergteamet.The design work was carried out as follows:- After an initial meeting a requirement specification was worked out, describing the problem and previous experiences of platforms and requirements for the design and equipment.- A concept sketch was developed with consideration of surrounding factors.- A constructed 3D model was presented along with the choice of materials.

The access to good sanitary facilities is an important factor that elevates the experienced living standard as it improves hygiene and reduces the transmission of deseases. The ratification of the millennium goals by 189 countries demonstrates that this is an important international issue. Together the countries have taken upon themselves that the proportion of the population that lacked access to sustainable safe drinking water and sanitary facilities in the year 2000 will have been reduced by half by the year 2015. In Peru, the construction of sewage pipe networks to transport the sewage out of the direct human environment is progressing. The safety and sustainability of these systems can be questioned, since in Peru the sewage seldom receive any treatment before being emitted to a recipient. This is taking place in Picota and sorrunding villages as well. In the last 25 years several systems implementing small-scale onsite treatment have been introduced throughout Latin America in an attempt to give more people access to sustainable and safe sanitary facilities, reducing water consumption and taking advantage of the agricultural values of the sewage fractions while protecting the environment from its negative impact. In this study three different sanitary systems and the effects of different population growths were compared.

Considering that the price and demand for energy gradually has risen over the past decade and a wider discussion about the human impact on the environment has become increasingly more important and given a clearer role in modern society. This has contributed to increased incentives to reduce the use of fossil fuels and increase the use of renewable energy.The agriculture currently accounts for 20 % of Sweden's total greenhouse gas emissions. A way for an agricultural company like Wapnö AB to reduce their emissions could be to utilize existing renewable energy sources within their own premises.The report's aim is to create an energy audit of Wapnö?s existing energy system and how it changes with a future biogas plant in operation. The energy audit is used to illustrate how the company?s climate footprint could change.

Discharge of inadequately treated waste water containing nutrients such as phosphorus and nitrogen as well as organic matter and bacteria is associated with a risk of eutrophication and contamination. The Swedish government has decided upon several Environmental Quality Objectives aiming to reduce the emissions of nutrients to water bodies.In Sweden, there are between 675 000 to 1 000 000 on-site sewage systems. Recent studies have shown that the function of small sewage treatment plants is in many cases insufficient. To prevent this regular service and supervision by a professional is needed. The focus of this study are small sewage treatment plants which use a technique where mechanical, chemical and/or biological reduction of pollutants is being used in the same facility to reduce nutrients in household wastewater.The aim of the study is to investigate how different municipalities ensure that small sewage treatment plants fulfill the requirements and reduce pollutants as efficient as the manufacturers claim.

Membrane bioreactors (MBR) combined with biological phosphorous treatment (Bio-P) has been investigated if that could be an alternative to the future expansion with conventional active sludge treatment at Lundåkra wastewater treatment plant (WWTP) in the proximity of Landskrona, Sweden.The results showed that the surface demand in the biological treatment will be reduced with 67% with the MBR-alternative compared to a conventional activated sludge process. The nutrient removal in the MBR-solution was decreased or unchanged for nitrogen-, phosphorous- and organic parameters. However, the energy demand will increase with an estimated cost of approximately 1 million SEK annually. Moreover, the extra chemical consumption is estimated to cost 370 000 SEK annually.The disturbances caused by filamentous bacteria such as sludge dispersal could be resolved with MBR-technology because the membranes are not affected by these organisms. The Bio-P process combined with MBR-technology works if the wastewater recirculates from the membranes to an aerobic zone.In the proposal, there will be a new pre-treatment step, for instance hole screens.

This examination work is performed at the institution of industrial economy and production at Jonkoping technical university, for JELD-WEN Door Solutions plant in Forserum.Today the focus in the company is on to reduce their inventories binding of capitals as well as inventory of products and that includes to get a good control of the supply and handling of material which is of great importance.JELD-WEN Door Solutions is one of the worlds leading producers of windows and doors and the head-office is located in Oregon, USA.A great number of wooden doors are manufactured by the company in varying of constructions, classifications and performance.The production of the plant in Forserum has a project- and customer focus manufacturing where only internal doors are produced. The overall market they are concentrated on is to different institution such as schools, hospitals etc.The purpose of this work is to investigate possibilities to improvement of material- and production control at JELD-WEN. The report will handle the master production schedule to and from the production divisions within manufacturing industry. Focus will be on the way for information- and material flows from arrival, transport within the company and further on to customers.Further a map of the flow was performed which gave a clearer picture of the connection between the flow of information- and material for the manufacturing process. On the basis of the mapping of the flow, the group discovered that the flow of material had some improvement potential.

The purpose of the project has been to work out recommendations that reduce the energy-related costs and environmental impact of HPW Fresh & Dry Ltd., a fruit drying factory in Ghana. The factory produces electricity with diesel and biogas but also purchases electricity from the national electricity company. Heat for the drying process is produced from biogas, kerosene and solar panels. In the project the energy system was analyzed by measuring production and consumption of heat and electricity. The project results show that the factory can become self-sufficient on heat if the available energy is used more efficient. The production units for both electricity and heat have low efficiencies.

Today cultivation of cereal in Sweden has high costs for establishment in relation to the rest of the world, and if this cultivation will be able to continue, the farmers have to control their costs. It is important to see all costs, not the maximum harvest achieved, but the net result. All farmers have different conditions with respect to soil, direction of the farm and were the farm is located geographically. With the right knowledge and ambitions, we think most farmers could change to reduced tillage. In this paper we have tried to find out if reduced tillage is an alternative for farmers.

Through previous studies during my education, I have experienced that chemical deicing road salt is a known problem, mainly in southern Sweden. Road salt causes damage to the environment and also damage to vehicles and structures such as bridges, etc. Road salt causes vehicles and steel constructions to rust, leading to increased costs for repairs of damage to structures. Road salt also causes damage to the plants and the economy to suffer, when plant material and soil needs to be replaced. In order to get closer to a solution, I put up three questions.

This study was made as a part of a feasibility study on a polishing wetland at Rimbo wastewater plant (wwp) in Norrtälje municipality. The wwp had to decrease the nitrogen discharge to reach the limit 15 mg tot-N/l. The nitrogen in the outlet was mainly in the form of nitrate, hence the wetland mainly ought to support denitrification. The proposed area for the wetland was situated right next to the wwp and was already in the municipalitys posession. One aim of this study was to examine what spieces of plants needed to achieve highest possible denitrification.

Landfill leachate contains a variety of contaminants and is created when rainwater percolates the landfill. For landfill management the leachate is the main issue that can cause problems to the environment. At the landfill of Fläskebo, Renova AB treats the leachate in a local treatment plant. The treatment consists of a chemical treatment step with chemical precipitation, flocculation, sedimentation and filtration, and a final step with a carbon and peat filter. Renova has to ensure that the condition of the leachate reaches the regulation set for the landfill before it is released to the recipient.