Background:IT development has in recent decades been fast progressing. In Sweden many schools have begun to invest in IT and new technologies. What happens at the schools that are investing in IT equipment and modern technology?Purpose:The purpose of this study is to elucidate the conditions for and the success factors and barriers that principals and teachers will experience in IT. Principals' experiences are complemented and mirrored against the teachers.

Denna studie avser att ta reda på om någon förändrad effekt kan fås gällande bränsleförbrukning och emissioner då dieselolja strömmar igenom ett magnetiskt fält innan det förbränns i en dieselmotor som driver en generator. Utrustningen som ger upphov till magnetfältet har tillhandahållits av ett kommersiellt företag. Studien består av två delar, en teoretisk del och en praktisk del. I den teoretiska delen presenteras tidigare vetenskapliga studier inom ämnet samt hur tillverkaren av utrustningen menar att tekniken fungerar. I den praktiska delen har tester gällande rökgasemissioner och bränsleförbrukning gjorts.

The intention of this final thesis is to examine how to create a schoolyard that inspires children at the age of 6 ? 12 years to play and give them possibility to develop. To get a lot of knowledge in this subject, I have combined studies of literature with practical studies at Hosjöskolan in Falun. During my practical studies I have done interviews, walks in the area with the children and visited other schoolyards. I have based a design proposal for the schoolyard of Hosjöskolan on these studies.

Many watersheds have lost stocks of migrating fish species because of the development of hydroelectric plants and other fragmenting barriers. The remaining stocks of migrating Atlantic salmon (Salmo salar) and brown trout (Salmo trutta) in River Klarälven, Sweden are five times smaller compared to one hundred years ago. A fish-trap at the hydroelectric plant in Forshaga has been vital for the continued existence of the stocks. This is the first hydroelectric plant of eight, blocking the way to the spawning grounds. Spawners are collected in the trap for both hatchery and transport by truck upstream and past seven more hydroelectric plants to the spawning grounds, where they are released for possible natural reproduction.

As a part of the fight against the global warming the energy production needs to be more efficient and redirected towards sustainable options. One alternative is cogeneration, which means that electricity and heat is produced in one plant. The purpose with this survey is to examine if there are any commercial available combined heat and power techniques, based on combustion of solid moist biomass, which are suitable to small-scale applications. The technique must be able to produce between 2 and 10 MW thermal and the heat demand is a Swedish district-heating system. When already published reports had been studied, the Organic Rankine Cycle (ORC) was chosen as the most suitable technique.

The number of wireless networks has increased rapidly among both home users and companies in just a few years. That has brought a lot of good things with it, for example the possibility to connect wireless equipment to the network or Internet from an arbitrary position within range of the accesspoint. But since the transmissions take place through the air some new security risks appear. It?s difficult to restrict the signals to a specific space and thereby a lot easier for unauthorized to eavesdrop or disturb the signals compared to a traditional wired network.

VBG Produkter AB is a process-orientated company that develops, manufactures and markets trailer couplings with belonging coupling equipment, protection equipment against skidding and stands for wagon-bridge for heavy vehicles. The company feels that their set-up time in production for couplings is not at an acceptable level. Due to high demands of customer oriented production the intermediate stock level of included products within the assembly of couplings has gradually increased which has resulted in high inventory holding costs. VBG Produkter applies Kanban in their production, therefore it is important to produce exactly the necessary amount and avoid overproduction. The objective of this project is to suggest appropriate solutions so that VBG Produkter is able to reduce their set-up time in assembly of couplings, by identifying internal and external set-up time for the chosen process bushing cell.

Building Automation Systems in commercial buildings are often designed and installed by different contractors, using equipment and components from different manufacturers. The lack of an accepted communication standard has resulted in a few different standards. Many manufacturers of building automation systems only support one, a few or none of these standards, while developing proprietary system solutions. Regin, who develop such equipment, are planning to adopt an open communication protocol specially designed for building automation - BACnet. As a step in that direction this thesis was announced with the purpose to investigate the possibility to implement BACnet in one of their products and to gain more knowledge of the BACnet protocol.

Biogas is a renewable energy produced through anaerobic digestion, which means that organic matter is degraded by microorganisms under anaerobic conditions. The produced biogas can then be used for cogeneration, electricity, heat or upgraded to vehicle gas. Eskilstuna Energy & Environment AB has four digesters at Ekeby water sewage treatment plant, Eskilstuna. One of the biogas reactor (RK4) is equipped with a jet-mixing system while the remaining digester uses top-mixing. The mixing system is an important parameter to achieve optimum operating conditions for the process regarding gas production and degree of digestion.

Russian comfrey, Symphytum x uplandicum, was tested as a plant nutrient source in a trial with tomatoes. Comfrey liquid was produced by Stiftelsen Holma i Höör. Tomato plants of the cultivar Aromata planted in a medium of soil:peat (1:1) enriched with organic nutrients and lime, were fed with comfrey liquid plus Biofer, in three different concentrations. Two different concentrations of BioRika were used as comparison, along with an unfertilized control group. In the comfrey treatment I a total amont of 1g N, 0,23 g P, 0,84 g K, was given to the tomatoes.

Sammanfattning Kisel (Si) är det näst vanligaste ämnet (drygt 25 %) i berggrunden. Bara en del av detta är tillgängligt som monokiselsyra, den form i vilken kisel är upptagbart för växter. Jordens kiselinnehåll är beroende av bergets vittring. Mycket höga halter av kisel återfinns i naturen i vulkaniska substrat (pimpsten innehåller drygt 66 % Si och scoria närmare 47 % Si), i diatomit (ett mineral bestående av resterna från encelliga kiselhaltiga alger, s.k. diatoméer) innehållande 66 % Si, scoria approximatly 47% Si), in diatomite (a mineral consisting of the remainings of single celled algae, diatoms containing < 40 % Si) and in some clays (30-60% Si).

This Master Thesis describes how a concept for a new fly fishing reel has been developed. Thethesis has been an interwork with Loop Tackle Design, which is a leading company in the flyfishing industry with their high-quality products. Loop designs and develops all types of flyfishing equipment like fly fishing reels, rods, lines and clothes.The purpose of this thesis is to generate a concept for a new type of fly fishing reel. The new flyfishing reel shall be innovative and reduce the number of components in fly fishing equipment.The solution for this is to create a fly fishing reel that is collapsible and can be used for all typesof fly fishing.The thesis started with a history of fly fishing and the equipments that have been used for flyfishing in the past and what is used today, in order to get an idea how fly fishing haveprogressed. A frame of reference was then compiled to get an idea of the forces and surroundingsa fly fishing reel will be exposed to.

The idea with constructions made out of prefabricated elements is that it should be quick and easy to build as the demands for lower production costs, increased profitability and shorter production times are constantly increasing. High accuracy in measurements and well-balanced tolerances is required to achieve this. The fact that the concrete-elements doesn?t fit and that damage occurs during assembly is a highly topical issue even though we now have methods and systems that make this high-intensity construction possible. Through this report we want to highlight the problems that cause the dimensional and tolerance problems and give suggestions on how to come to terms with these.

Due to a growing interest in communication in today?s society the demand for equipment that is used in communication networks increases while the competition between companies that produce this equipment grows. To meet the increasing demand and at the same time having a competitive product development many companies use some effective product design, such as the modular product design. When a modular product design is used it?s good to compare different module configurations for a certain product and to simplify these comparisons some tool can be used.

The purpose of this thesis is to examine how investments are justified in the Swedish data center industry, with a focus on cooling equipment. This is achieved through semi-structured interviews with 20 different interviewees. These interviewees represent different facets of the industry and facilitate an understanding of which factors, such as: investment costs, operating costs, reliability, environmental impact and the influence of external and internal actors, come into play and to which degree they impact the investment decision-making process. The results show that primarily low operating cost in the form of low energy consumption is the driving factor when it comes to the procurement of new equipment. A lower environmental impact is a positive side-effect of lower energy consumption.