The Volvo Trucks plant in Umeå is a highy complex manufacturing facility where the same production line handles a variety of different models. This require flexible and agile processes with high quality standards. This thesis studies the flow of material through a production line and how Volvo can use their existing manufacturing monitoring system to optimize the flow of materials.The goal with the thesis is to identify eventual problems with the flow of materials and to deliver a few proposals on how the production line can improve its productivity. The theory of LEAN, Just-In-Time and Supply Chain Management serves as the scientific reference to this project. By analyzing the flow of material, performing interviews and observing the processes a few problems are identified.

The goal of this master thesis is to show the benefit of using computer games of the type First Person Shooter, FPS in the field of military simulations. The main focus in this is around a couple of topics. Creating the AI that controls the behaviour of the computer-controlled characters, the bots. Create an environment where it is possible to supervise the bots and also design a framework that enables cooperation between a group of bots, a squad. The result is Total Unreal Studio, TUS, a program where it is possible to add bots to a squad, connect them to a game server and inspect what the bots are doing.

The objective of this work was to introduce measures to reduce energy and water demand at Gävle Söder 17:10. To succeed, this energy audit has been made. The work is based on collected statistics from the property owner Norrporten, measurements, literature review and through consultation with experts in the field. Two models, one for each building, have been created in the simulation program BV2 to estimate the potential of energy measures based on the collected information. The models in BV2 have been verified against the statistics of the energy consumption.With the help of calculations and simulations, seven cost-effective measures have been identified.

The eutrophication of inshore seas, lakes and watercourses is mainly due to leaching of nitrogen and phosphorus (P) from agriculture. Many efforts are made to reduce the lea-kage of phosphorus in Sweden and the Baltic Sea countries. Phosphorus is also a finite resource and the mining of good quality raw material gets more and more difficult. Se-dimentation dams in combination with filters is one relatively new method to separate P from run-off and drainage water from agricultural land. This study was a part of an IVL Swedish Environmental Research Institute?s project which tests the capacity and func-tion for separation of phosphorus in four phosphorus filters.

The purpose of this paper is to examine what problems cabbage growers have with the Swede Midge. The last few years the Swede Midge, Contarinia nasturtii, has become a larger problem for cabbage growers in several countries in Europe as well as in Sweden. In Canada the problems are so severe that the midge is classified as a quarantine pest and therefore certain rules have to be followed. I have collected facts of the biology, host plants and reproduction of the Swede Midge, as well as the growers experiences and the occurrence of the midge in Canada, Europe and Sweden. The Swede Midge is hard to control because of its short life cycle and the larvae are protected between the heartleaves of the plant. When the larva feeds on the growth point the plant becomes distorted, in some cases several heads develop or none at all. When the midge infests spring rape its flower buds become undeveloped and rosette like.

Since energy simulations are used to verify that projected residential buildings will reach the current energy requirements it is important that the results are reliable.This report investigates the extent of uncertainty in energy simulations, estimates the causes of the uncertainty and its economic and environmental consequences.The method used in this report is based on three validation methods; empirical validation, analytical validation and comparative validation. The analysis was carried out for five multi-family dwellings in Uppsala with installed meters for energy measurements. One of these objects, Klockarlunden, was studied in more detail than the others.The results show that the deviations are between 10 and 29% for the studied objects, which means that the uncertainty is estimated to be at least 29%. All simulations underestimate the buildings need of energy. The simulation for Klockarlunden can predict the energy consumption to be within the range of 46-98 kWh/m2year with 90% confidence level based on the current uncertainty.

This project is a literature study with the hypothesis that Arctic climate has a positive effect on the accumulation of metabolites in berries. Plant metabolites are often divided into primary and secondary metabolites. Primary metabolites such as proteins and nucleic acids are essential for cell function, while secondary metabolites are often non-essential, but have important functions regarding reproduction and survival. The berries mentioned in this project are from the families Ericaceae, Rosaceae, Elaeagnaceae och Grossulariaceae.The conclusion drawn from this literature study is that it is not obvious what favours accumulation of metabolites in berries. Other factors aside from climate affect the production of secondary metabolites, such as time of harvest, cultivars and ripeness.

In this work an assessment of the compressed air system in the facilities of Vattenfall Heat Uppsala has been conducted. The facilities constitutes, among others, a combined heat and power plant, and two waste incineration plants. The compressed air is supplied primarily by seven rotary screw compressors and yearly electric energy consumption in these has been determined. Furthermore, the usage of compressed air has been mapped in order to find processes with energy savings potential. Several suggestions how to reduce the usage of compressed air have been presented, resulting in decreased need of electric energy and reduced CO2-emissions.The results show that total need of electric energy in the compressors, during a standard production year, amounts to 5.83 GWh.

Denna rapport beskriver det examensarbete som utförts på Calix AB under vårterminen 2013. Calix AB tillverkar värmare för bland annat batteri och kupé till fordonsindustrin. Uppdraget i detta examensarbete var att göra en omkonstruktion på BEV-heatern (Battery Electrical Vehicle) som är en batteri- och kupévärmare till el och hybridfordon. Problemet med den nuvarande konstruktionen är att den bygger på delar från äldre värmare till fordon med förbränningsmotorer, samt att konstruktionen inte är lämplig för produktion i större serier. Krav som Calix AB hade var:Integrerat ChassiMinimera tryckfallUnderlätta montering och tillverkningUppfylla standarder satta av fordonsindustrinKunna monteras ?in-line? i fordonetFör att kunna genomföra projektet var vi till en början tvungna att få kunskap om hur den befintliga BEV-heatern fungerar.

Modern missiles must meet higher and higher demands. They should be autonomous, have long range and still have a big effect on the target. To maximize effect on target some missiles not only minimize miss distance, but also try to hit with a certain angle; often perpendicular to the surface of the target. In this thesis a method to guide the missile in the terminal phase of its mission where both point of impact as angle of impact are specified. The method consist of two parts.

The purpose of this master thesis is to investigate different types of measures for making buildings more energy efficient and to estimate their profitability. The calculations were performed with the building simulation program VIP+ and the evaluation of the profitability with the life cycle cost method. Furthermore, it was examined how losses in the distribution of secondary systems of district heating can be avoided. Options to replace district heating with a local district heating system based on bio-energy have been investigated. The possibilities of achieving more efficient thermal energy consumption and production for the chosen estate were also examined.The object of the study has been a residential estate with 133 detached houses in Uppsala, built in 1974.

In the spring of 2014 Sweco Systems AB were commissioned to design a ventilation system for a newly built preschool in Linköping. Terms from the client was that it cost efficiency would cope with the energy demands that are placed on the building. The unit chosen was a cross-flow heat exchanger, and this work is to compare it with two other heat exchangers to see if a more energy and cost efficient could have been chosen. The heat exchangers that was chosen for the comparison was a rotating- and a counterflow heat exchanger. Simulations have been made to the different heat exchangers by the manufacturers.

Arbetsterapi är ett ämne som framhäver hälsa och välmående genom aktivitet. Det huvudsakliga målet som arbetsterapeut är att möjliggöra för personer att delta i aktiviteter i det dagliga livet. Virtual Reality är en simulation där datorgrafik används för att skapa en tillsynes realistisk miljö och denna värld är inte statisk utan integrerar med användaren. Syftet med denna litteraturstudie är att kartlägga hur och varför Virtual Reality kan användas av arbetsterapeuter. En systematisk litteraturstudie genomfördes och efter databassökning uppkom 14 artiklar som via en manuell sökning kompletterades med ytterligare 5 artiklar.

Interest in the implementation of AGV-systems (Automated Guided Vehicle) has in recent decades increased. The reason is that it allows companies to perform reliably and secure internal transport while reducing the need of personnel. It is one of todays most advanced and complex material handling system that can independently make their own decisions regarding flow paths and traffic control. An AGV-system consists of transport units carrying cargo from point A to point B, and communicates using a computer.The purpose of this study is to develop a model on how to proceed in order to design an AGV system in heavy industry. The model is tested by a case study of a company in the metal industry to determine if the model works and gives the correct result.

This examination work is the final work in our education to become a Bachelor of Science inMechanical Engineering by the University of Lund.The main purpose with this work has been to develop a new effective material handling system for TPPM AB in Lund since the existing system starts to become out of date. The future system that is going to be installed shall have the capacity to support all machines with unit-, semi- and finished goods during full production. The work has also included studying the possibilities to change the material flow in a positive way between the storage and the production when one is using existing buildings.During our work we have been used a simulation program called AutoMod, performing company visits, interviews and reviewed internal and external information to create a picture of what the best conclusion can be. During the work we have contacted five suppliers to receive system solutions and quotatioris. The suppliers, which have been contacted, are Swisslog, Moving, Rocia, Christensen & Hansen and ABB.