This master thesis has been performed at Sectra Communications AB in Linköping where they manufacture electronic encryption devices. In cryptology it is essential that an eavesdropper cannot find the plain text. To assure that a system is safe, all devices are thoroughly examined so that they don?t emit any secret information, so called Compromising Emanations (CE). This is done by comparing the secret signal with measured signals on the screen of an oscilloscope, a process that is very time consuming and furthermore, the risk of missing compromising emanations is high.

This master?s paper first presents some of the principal theories and concepts developed by the poverty researchers Rowntree, Titmuss, Townsend, Sen and Lister. These theoretical frameworks are then related to two documents from the EU and Sweden concerning combating poverty and social exclusion, bearing on the establishment of the ?Year 2010 against Poverty?. Finally, I discuss the value in practice of these theories and policy documents, as regards reducing poverty in Europe.It has become clear in this investigation that the theories and concepts from earlier research are still relevant to the formulation of contemporary policy programmes, and that earlier research helps us to avoid old traps in fighting poverty.

Swedish energy policy aims to increase the use of energy from renewable sources and this should be done in a safe, environmentally and sustainable manner. According to the Energy Agency the use bio-fuel increased by 73% between 1990 - 2006. Stands with high share of slash are often located on areas with high productivity which often are located on soils with poor bearing capacity. This will increase traffic on susceptible soil leading to increased ground damage. To reduce the risk of ground damage at slash-forwarding, ground protection is needed.

Swedish energy policy aims to increase the use of energy from renewable sources and this should be done in a safe, environmentally and sustainable manner. According to the Energy Agency the use bio-fuel increased by 73% between 1990 - 2006. Stands with high share of slash are often located on areas with high productivity which often are located on soils with poor bearing capacity. This will increase traffic on susceptible soil leading to increased ground damage. To reduce the risk of ground damage at slash-forwarding, ground protection is needed.

In this report a study has been done regarding different heating systems on which are the mostcomprehensive with solar heating systems. The report has also been focusing if solar power can beused as a primary heating source for supplying more than 50 % of the buildings total heatingproduction. The University of Dalarna constructed a demo-house for this purpose and according tocalculations the total solar usage is more than 50 %. This house has been made for referenceregarding the design of the heating system of property 5:37.Further studies have been made to compare different heating systems that are compatible with asolar system, where the compared systems purpose is to be independent of direct using electricity. Asystem of this design is regarded as sustainable according to environmental as economic issues.

Antifouling paint containing the biocide bisTributyltinoxide (TBTO) has been used since1960 to reduce the occurrence of fouling on hulls on boats/ships. January 1st, 2003 theantifouling paints containing TBTO were prohibited. This ban covered all use of paintcontaining the substance TBTO. The ban was introduced because of alarming observationssuch as development of imposex in aquatic non-target organisms. Imposex is the impositionof male sexual characteristics on mainly female marine snails and occurs due to exposure toTributyltin (TBT).

Gliding and sealing functions in Öhlins shock absorbing systems sets great demands onthe contacting surfaces. In this particular case, the bushings and the sealings on acylinder piston. The surface wanted is a surface with both low frictional forces and smallleakage. This study was done with the goals of investigating and determining existingsurfaces due to the frictional force and leakage. How can we in an easy mannerdescribe these?A number of ten front forks were part of a main study.

As the number of people owning a smartphone rapidly increases so too does the opportunity for various researchers to exploit this technology. The possibility to recruit people to participate in research studies improves and with it the chance to get more diversified target groups in terms of age, socio-economic status, geographical location, etc.In this essay, I argue that the opportunities smartphones offer in terms of collecting research material is vastly underestimated in several areas, bearing in mind the advantages they present. In order to support my argument, I shall present a case study carried out in the research area of happiness ? an area where the use of smartphones has provided significant opportunities for research.In order to gather the advantages and disadvantages of this method of study from the participants? perspective, I have followed a happiness research study which is a collaboration between Umeå University and The University of Stockholm. I have interviewed the participants of this study in order to assess the advantages and opportunities that smartphones offer in research programs.Overall, the participants? opinion of this research method was generally positive and it was considered to be quite easy to participate in the study and respond to the questions asked.

The aim of this master?s thesis is to examine how libraries can organize their collections in terms of library shelving and displays and to what extent these activities stem from a desire to create a user-friendly library. The thesis is based upon a case study of Arkenbiblioteket in Sweden and the material consists of a literature study and qualitative, semi-structured interviews with three librarians at Arkenbiblioteket. The theoretical framework consists of theories on information-seeking behavior, classification and displays. These theories form the basis of the analysis of the empirical material.The main reason for the changes in shelf arrangement at Arkenbiblioteket was a desire among the library staff to create a user-friendly library.

When constructing a building, a number of aspects must be harmonized in order for it to fulfill requirements ? a building must fulfill requirements such a load-bearing, conservation of energy and a good indoor environment by means of, among other things, moisture proofing .Moisture problems in buildings can affect health negatively. As we are increasingly staying in indoors, demands on a good indoor environment are higher.This work starts with examining moisture problems in slab-on-ground solutions, and then links the various scenarios to moisture problems in a concrete slab of a real building. The building with moisture problems is located in Årby by in Borlänge and moisture damage was found in the slab at an apartment adjoining wall.By reviewing literature written within the field of moisture problem, making hand calculations and modeling in the program Comsol Multiphysics, judgments are made to find explanations as to why the rise of moisture occurred in the building in Årby by.Generally, the following guidelines may be used to reduce the risk of moisture problems in slab-on-ground constructions:Drying of construction moisture before laying the floor material.Using draining layer beneath the slab, to prevent capillary suction.Using insulation under the slab, partly for comfort and to establish the temperature difference between the ground and the concrete slab.Avoid direct contact between the wood and concrete, due to degradation and fouling smells that normally occurs.If necessary, use additional vapor barrier.In addition to the above, there are various methods for moisture-proof and moisture-monitoring by design or by the method ByggaF suited for the entire construction process various events..

This master?s paper first presents some of the principal theories and concepts developed by the poverty researchers Rowntree, Titmuss, Townsend, Sen and Lister. These theoretical frameworks are then related to two documents from the EU and Sweden concerning combating poverty and social exclusion, bearing on the establishment of the ?Year 2010 against Poverty?. Finally, I discuss the value in practice of these theories and policy documents, as regards reducing poverty in Europe.It has become clear in this investigation that the theories and concepts from earlier research are still relevant to the formulation of contemporary policy programmes, and that earlier research helps us to avoid old traps in fighting poverty.

The number of people of getting allergic symptoms is increasing and the reasons are considered to be many. The human have changed their habits and spend more time indoor. In combination with new building technologies where denser housing constructions and new materials this causes bad indoor climate contributes to a higher occurrence of allergiesThere are several courses of action to deal with this problem. One action is by choosing allergy-free interior surface materials. An allergy-free material emits low concentrations of harmful substances resulting in a great indoor air quality.

Ett nytt badhus i Västertorp, beläget i den bortglömda, av E4:an dammiga, Mellanbergsparken dit folk kan gå för att bada. Det behövs inga fler simhallar i Stockholm, men ett nytt sorts badhus dit alla olika människor av alla åldrar kan komma och bada i en starkt arkitektonisk miljö - det fattas idag. Därför har jag fokuserat på att gestalta starka rumsligheter där vattnet får stå i fokus och förstärka upplevelsen av rummet. Genom badhuset finns tre olika steg på skalan i material och badupplevelser som går från asfalt till skog, från slutet till öppet. Längst ut mot skogen finns en badsal på 24 x 84 meter där en pelarskog av tegelpelare möter vattenytan.

When constructing a building, a number of aspects must be harmonized in order for it to fulfill requirements ? a building must fulfill requirements such a load-bearing, conservation of energy and a good indoor environment by means of, among other things, moisture proofing .Moisture problems in buildings can affect health negatively. As we are increasingly staying in indoors, demands on a good indoor environment are higher.This work starts with examining moisture problems in slab-on-ground solutions, and then links the various scenarios to moisture problems in a concrete slab of a real building. The building with moisture problems is located in Årby by in Borlänge and moisture damage was found in the slab at an apartment adjoining wall.By reviewing literature written within the field of moisture problem, making hand calculations and modeling in the program Comsol Multiphysics, judgments are made to find explanations as to why the rise of moisture occurred in the building in Årby by.Generally, the following guidelines may be used to reduce the risk of moisture problems in slab-on-ground constructions:Drying of construction moisture before laying the floor material.Using draining layer beneath the slab, to prevent capillary suction.Using insulation under the slab, partly for comfort and to establish the temperature difference between the ground and the concrete slab.Avoid direct contact between the wood and concrete, due to degradation and fouling smells that normally occurs.If necessary, use additional vapor barrier.In addition to the above, there are various methods for moisture-proof and moisture-monitoring by design or by the method ByggaF suited for the entire construction process various events..

By using industrialized building, pre-installed modules can be delivered to the construction site where they are easily mounted. This method has many advantages compared to on-site manufacturing, for example, the precision during the production process should be much higher than building each wall and floor on site. Furthermore, the quick erection procedure when using prefabricated elements and the possibility to use weather protection has the advantage of not being dependent on weather conditions, and many other factors.Masonite Beams AB is a Swedish company (a member of the Norwegian company, Byggma ASA) with a relatively new technology using light weight beams as bearing elements in the walls and a certain stiff board lamella slap which is mounted on the top of the floor structure creating an integrated stiff beam / board floor structure. The elements are flat which make it much easier to transport the elements from the factory to the building site where the building parts are easily mounted with special mounting stud.One of the main drawbacks of lightweight structure is the sound transmission. The main topic is low frequency annoyance, however the complex structural elements and their mutual sensitive connections other acoustical problems might appear.