More frequent and intensified rainfalls are expected to occur due to climate change in the nearfuture. This together with a higher proportion of paved areas increases the pressure on today?sstorm water systems (Risinger, 2014; Boverket, 2013; Stahre, 2006). Traditional storm watersystems (i.e. underground pipe systems) have during last decades started to be questioned(Olshammar & Baresel, 2012).

Background: Many elderly are feeling lonely and insecure in their homes; it?s difficult for them to cope with their life situation after discharge from hospital. There is therefore a need to get a deeper understanding of their situation and the need for action, thus possibly preventing a new hospital admission. Recent research shows that a better coordination is necessary when elderly are discharged from hospital and that the quality of the discharge is essential for how they cope at home afterwards.Purpose: To get a deeper knowledge of older people´s experiences associated with frequent readmissions to hospital.Method: A qualitative research approach was used trough interviews with open questions. Ten persons with an age of 75 years and older who had a readmission to hospital within one month was interviewed.

Continuous improvement is one of five principles in General Motors ? Global Manufacturing System (GM-GMS). GM-GMS has been used by Saab Automobile AB since 2003 and is a central component for realisation of GM?s vision. Internal audits have discovered problems with one of the tools, practical problem solving (PPS), which needs to be improved.

More frequent and intensified rainfalls are expected to occur due to climate change in the nearfuture. This together with a higher proportion of paved areas increases the pressure on today?sstorm water systems (Risinger, 2014; Boverket, 2013; Stahre, 2006). Traditional storm watersystems (i.e. underground pipe systems) have during last decades started to be questioned(Olshammar & Baresel, 2012).

In this report focus is put on the combustion process at a cement plant. Combustion is the heart of the cement making process and absolutely crucial to have under full control and well optimized. The fuel is put into the process through a burner pipe and this burner pipe is modified to reach a more efficient combustion. The primary target is to enable burning of heterogeneous alternative fuels and increase the production level. Other positive effects from this type of optimization is lowered specific fuel consumption and lowered CO2 emissions. A redundant burner is chosen for the project and overall the project steps are the following: 1. Installing a Jet air nozzle ring in a way so it can move both axially and radially due to temperature changes. 2.

AimThe aim with this study was to acquire knowledge of mental training and if you can use it in the elementary school to increase in a short period of time the performance in a coordination test. Furthermore we wanted to investigate teachers understanding of the possibilities to perform this kind of training in the elementary school, and if there is support for this in the school regulation.MethodAs method we have used a combination of a literature pre-study, interview and at the end an experiment. Before the experiment and interviews could take place we studied literature about mental training to get a basic knowledge of the subject. The facts we learned from our pre-study and interviews gave us the base for our experiment. The experiment group included 23 pupils in a third class at school situated in Stockholm.

IT-system utvecklas idag ofta i globalt distribuerade organisationer. Detta görs för att möta de krav som ställs från omgivningen samt för att finna specialkompetens. En global organisation kan medföra distribuerat arbete, alltså att utvecklingsgrupper sprids över flera platser. Ett problem med detta kan vara att få alla delar av verksamheten att arbeta mot ett gemensamt mål. Koordination ? att hantera beroenden mellan element i komplexa organisationer för att möjliggöra effektivt arbete mot ett gemensamt mål ? blir då en viktig aktivitet.

Denna studie visar hur valet av metod och värderarens antagande påverkar värderingen avbyggrätter. Inledningsvis studeras ett antal faktiska värderingar med avseende på användametoder och antaganden. Vi finner att fastighetsvärderarna i regel använder ortsprismetodenvid värdering av byggrätter, som komplement används ibland en kalkylbaserad metod. Detvisas att fastighetsvärderarens antaganden om framtida bebyggelse i hög grad påverkarvärderingen. I mindre utsträckning påverkar valet av värderingsmodell..

BACKGROUND: Project based structures has become more and more common in the organizations of today. As the project based structures are given a more central role in the organizations the interdependencies between the projects are getting more attention. These structures need a new type of control to meet the unique challenges that arise. The researchthat has been done has been concentrated around the project form and the projects internal control, the area of multi-project management is therefore relatively unexplored. The few existing studies on the subject focus on projects in the construction industry why research inmore complex fields of business have been requested.PURPOSE: The purpose of this thesis is to explore and analyze how knowledge intense multi-project organizations manage their project activities, and to determine how different organizational characteristics affect the need for management control systems.METHODOLOGY: The empirical data has been collected through interviews with personnel in BT Products R&D, Gambro R&D and AstraZeneca Development.

GPS (Global Positioning system) and GIS (Geographical information system) has been used for planning and inventory in the forest sector for more than ten years. The last years the development has come to equip harvesters and forwarders with GPS and GIS (GIT). The goal with this study was to reach a basis for decision, how Stora Enso Skog should continue its investment in GPS and GIS in harvesters and forwarders. To reach this basis for decision, possible advantages and benefits, disadvantages and problems in the harvesting process was evaluated. The study was made as an interview study with four harvesting managers and ten machine teams. To secure the quality of the results an interview questionnaire was made before the interviews were done. The results showed that GIT will make the harvesting managers work easier.

For nearly twenty years people have been talking about Product models, but given that the building industry is so conservative, it is hard to implement new working methods. Product models are these days known as Building Information Modeling, BIM. People often say they work with BIM but they often forget the most important part, the information. A 3D model should be linked with characteristics and information. Information that can be invaluable for the facility manager.We have a vision that in the best of worlds the facility manager would be able to "walk" into the model and see what kind of installations are inside the wall or in the roof.

For Skattkärr IF a turf field with warming has been projected to increase field?s utilization hours and to have a longer period for athletes to perform their activities outdoors. The technique chosen to heat the plan is a type of a geothermal heating system without a heat pump. The brine, which is water with 30% ethanol, collects heat from the borehole and discharges it to a coil in the field. There is at position 11 boreholes but it is planned to increase the number to 31, which is the design for the facility.

This thesis treats Building Information Modeling, BIM, in the production stage. Brieflydescribed BIM is virtual model of a building object where all information about theobject is gathered. All the involved operators in the construction project have access tothe model and can gather or share information about the project. There are several waysto apply BIM in the production stage. This thesis primarily deals with visualization of theobject, preparation and planning, the ability to take amounts from the model andcoordination and clash control.The basic issue was highlighted by Byggdialog AB.

Drain water heat recovery is an uncommon measure in multi-unit residential buildings. There istechnology available for the purpose but the knowing and experience of the heat recovery systems islittle. The purpose of this thesis is to evaluate the future potential of drain water heat recovery inmulti-unit residential buildings.A major part of the multi-unit residential buildings in Sweden were built during modernismen andrekordåren (1940?1975). Many of the buildings have worn out drain and water supply systems andmany are in need of a general refurbishment.

This thesis treats Building Information Modeling, BIM, in the production stage. Brieflydescribed BIM is virtual model of a building object where all information about theobject is gathered. All the involved operators in the construction project have access tothe model and can gather or share information about the project. There are several waysto apply BIM in the production stage. This thesis primarily deals with visualization of theobject, preparation and planning, the ability to take amounts from the model andcoordination and clash control.The basic issue was highlighted by Byggdialog AB.