The aim of this thesis is to investigate the points of view of three groups of actors about their local learning center and its collaboration with the library. By interviewing groups of actors from the municipal sector, the library staff and students, I aim to investigate their associations of the learning centre, what kind of services it should offer, and how they understand the role of the library staff in specific collaboration between the public library and the adult education administration. The study design is based on Gunnar Grepperud?s and Terje Thomsen?s three missions for a local learning centre; the mission of a broker, a meeting place and a motivator. I also use Carol Kuhlthau?s levels of mediation as an approach to investigate how the actors want the library staff to work in relation to the centre.

This report describes the master thesis project ?Weight Optimization of a Composite Chassis for a Multimodal Lightweight Vehicle? which is a part of the Master program in Naval Architecture and a part of a research project at the Centre for Naval Architecture, KTH. Demands on smart and energy efficient transport solutions are continuously increasing. In the Stockholm region the citizens are expected to increase with 25% and the road vehicles with 80% until 2030, putting high demands on the traffic system. Using a small multimodal vehicle deals with this problem and uses both the land and waterways for transportation.

Background: When children are admitted to the hospital most of them experience a new and unknown world. The staff?s most important task is to reach out to the child in the best way possible. To give good nursing, knowledge has to be gathered of how the child thinks, feels and what the child wants. Aim: The aim of this study was to describe children?s experience of hospitalization on the basis of the four nursing concepts person, health, environment and nursing.

Introduktion/Syfte. Intresset för och användandet av adhesiv cementering av keramiska material har ökat under de senaste åren. Detta har lett till ett ökat intresse att kunna jämföra olika studiers resultat med varandra och därmed har även intresset för att utveckla internationella standarder inom forskning ökat. Syftet med denna studie var att jämföra den adhesiva bindningsstyrkan mellan ett laboratorieframställt material innehållande kvartsmjölsförstärkt epoxyresin (Sipoxy), med emalj och dentin. Detta för att avgöra om Sipoxy kan användas som en standardiserad ersättning istället för tänder i in vitro studier som utvärderar bondade keramiska rekonstruktioner. Material & metod.

The intention of this qualitative study is to describe and analyse women's violence against men from the perspective of authorities and volunteer organisations. Data has been collected trough semi-structured interviews with six respondents stemming from the police, social services and a help organisation for men respectively. The data has been analysed using existing research and common theories about power, sex and gender. The study shows that IPV does not only contain physical violence, but also acts of psychological-, sexual-, economical-, material-, and latent violence as well as the fact that one act of violence almost never exists alone. It is shown that women more often use psychological abuse against their partner then men do and also that men tend to stay longer in an abusive relationship then women.

One third of all Swedish people will suffer in cancer. Pain is a common symptom in cancer patients. The pain is subjective and includes several dimensions. The dimensions of pain are the physical, psychological, social and spiritual. This is a literature review and the aim with this study was to identify the pain experience in patients with cancer receiving palliative care.

The progress of the health among the elderly has a major meaning for the needs of care, nursing and social services. The health of the elderly has improved but fall and fall accidents are a major problem. Acute diseases, activities and environment risks are often related to fall accidents. The aim of the study was to describe health care staffs? opinions about fall risk and fall prevention.

SammanfattningSyfte och frågeställningar. Syftet med denna studie var att på äldre personer studera olika fysiologiska parametrar före och efter en period på åtta veckor med styrketräning som utförs tre gånger i veckan. Frågeställningarna var: Hur påverkas statisk och dynamisk maximal styrka i främre lårmuskulaturen av styrketräning? Är det någon skillnad i resultat mellan koncentrisk och excentrisk styrka i lårmuskulaturen före och efter styrketräningsperioden? Är det någon skillnad i förändring mellan benstyrka uppmätt med isokinetisk teknik jämfört med uthållighetsstyrka och ett kort funktionellt benstyrketest? Hur påverkas maximal syreupptagningsförmåga registrerad via submaximalt cykeltest respektive vid pyramidtestet av träningsperioden?Metod. I studien deltog 20 generellt ej påtagligt aktiva män och kvinnor i åldrarna 66-79 år.

Powder Metal (PM) gears are machine element components which operate under the same principle as conventional gears, but, due to their intrinsic material characteristic need to be designed slightly different, and its manufacturing process offers advantages previously unobtainable by conventional steel gear manufacturing methods. The use of PM in similar applications, such as synchronous hubs, makes them a suitable candidate for production in such material. The current master thesis work focuses on gear design using PM by utilizing finite element method (FEM) to reduce weight and inertia taking into account root bending strength and tooth deflection.First a topological optimization is used to determine feasible candidates for different web designs which have as objective to reduce volume, similar topologies were shown during different loading conditions; and hence, this topology was chosen as a suitable candidate. A shape optimization of the topological candidate was performed having as state variables root bending strength, independent for compressive and tensile side of the tooth loading; and tooth deflection, which in concept can be correlated to static transmission error (TE).Another aspect in this thesis analysed is the possibility to incorporate non-trochoid root geometry, a trochoid root is always present when machining with a hob, into the gear root and hence reduce the stress concentration here. Due to the use of PM, a non-symmetric optimized root can be achieved and hence be optimizing compression and tension.Results showed significantly lower inertia, for example certain results showed 40% reduced when compared to solid gear, with adverse effects as increase in tooth deformation and increase in maximum principal stress.

The purpose of this work is to see if the students, on two separate high schools, understand what skills you should achieve after completing the course in physical education and health A 100 points. The entire study is based on a student perspective. In order to best answer the purpose, the questionnaire used in the "available groups" in schools. The questions for the work are: To what extent and how students perceive what they should achieve after completing the course in Sport and Health A?, Which is the goal, based on the curriculum in Physical Education, that students feel are important to achieve? and how do a comparison like between these two schools on the basis of what students perceive that they must achieve in Sport and Health A?The result shows that the main goal that finds support in the course objectives is an assertion; Has knowledge of what to eat to maintain or improve health, which over 90% of students had checked in.

Lot?s of reasons are showing that outdoor life has a positive influence on the general publics health and studies are confirming this theory. On the other hand there are a few amount of Swedish science project?s regarding outdoor life. The aim of this study was to examine how people feel that their health influences by outdoor life.

Livsstilsrelaterade sjukdomar är ett växande globalt problem, och fysisk inaktivitet är en av de största riskfaktorerna. En av sjuksköterskans uppgifter är att motivera till hälsosammare levnadsvanor. En hälsofrämjande metod är fysisk aktivitet på recept, FaR®, som används i flera länder, men vars effekt även har ifrågasatts. Syftet med studien var att undersöka värdet av FaR® och vilka faktorer som påverkar det värdet. En granskning av 12 vetenskapliga artiklar genomfördes.

The concept of school forest was drafted in 1970 by the Forest in School organization and is defined as an area occupied by a school for outdoor educational activity. The main purpose of this study was to examine how schools use the school forest in practice, how it can be linked to the forest as an ecosystem service and find out how the forest is taken into consideration in the spatial planning. The study is mainly qualitative in nature and has been based on interviews conducted with educators engaged in outdoor education at four selected schools in a municipality in Sweden. Focus has been on the cultural ecosystem services for school forest, for example the physical characteristics that are considered as positive, forest influence on students' physical / mental health and the educational benefits available to be in the woods. Search has also been made to see how the forest is taken into consideration in the spatial planning and also what a contract agreements involves.

AimThe specific questions in the theoretic part were:What is contained in the terms "balance and balance skill" and how can this skill be measured?The specific questions in the empirical part were:How does balance skill in different age categories of children correlate with biological and physiological parameters such as age, gender, body height, weight and level of physical activity?MethodsLiterature search based on books and scientific papers related to the questions posed above. Selection was made at libraries and on?line through "Pubmed". Specific search words were used.

This study was conducted on a property with a thinning machine team. The purpose was to investigate in which machine, the harvester or the forwarder, that caused most damage to the trees in six different stands. Different factors, related to the damage frequency in the stands, were checked out. For example: basal area per hectare, thinning strength, tree diameter and the rate of production. The harvester drivers were also interviewed about how, when and why stem damages occur and how to minimize them. The study stated that 4.3 percent of the trees were damaged. Out of these 88 percent was caused by the harvester and the rest, 12 percent, by the forwarder..