Sports facilities are a highly unexplored field, and as of the autumn 2008 no research is being conducted about sports fields at Swedish architecture universities. Very few people recognize the sports field as an area for the architecture profession, and to gain more information about sports fields I have discussed the subject with people with connections to architecture and/or sport. The sports field represents a type of sports facility, a permanent football and/or bandy field surrounded by running tracks with appropriate measurements. Like the city?s physical environment, the sports field is a public place, where outdoor activities take place.

In today's agriculture efficiency and the capacity of tools and machinery are crucial. In this work we investigate whether it is possible to enhance the capacity of sowing by increasing the work speed of seeders, how seed technology affects seed placement, and if there is any difference between two different brands of seeders and their sow techniques. The seeders we have chosen to compare are Väderstad Rapid drill and Amazon Cirrus drill. The tillage capacity of the seeders and their traction power needs were examined as well.Väderstad Rapid and Amazon Cirrus were tested in a randomized block design with four replicates at three different speeds, 8 km/h, 12 km/h and 15 km/h. The seed placement at the different speeds was examined by dividing the seedbed into four different zones from its surface to its bottom.

The aim of this thesis is to examine the institutional effectiveness of the environmental institutions Helcom and the Mediterranean regime, by using Haas, Levy and Keohane's "the three Cs"; governmental concern, contractual environment, political and administrative capacity. The method used is a comparative analysis.This study takes into consideration the specific structural and economic factors that are prevailing in each region where the environmental regime operates. This study also takes into account the influence of the European Union as a factor that affects the environmental progress.By focusing the study on the line of conduct concerning hazardous substances by respectively regime this study shows that the institutional effectiveness is fulfilled in neither Helcom nor the Mediterranean Regime, although Helcom has been more successful. The lack of state capacity is the most restraining factor for both developing countries and countries in the transition towards being developed, to achieve a good environmental status of the sea. This study also shows that the European Union sometimes has a greater impact on the environmental progress in states, rather than the environmental regime in countries that were/are aspiring members, thus showing the ineffectiveness of the regime..

Gender equality and gender equality work is relevant for today's working life, and previously male-dominated occupations may be increasingly under pressure to become more equal. This paper aims to explore and understand how the firefighters at a station are experiencing gender and gender equality in rescue services.Using theories of how sex is done, how a power perspective and a structural approach can show men's and women's different conditions in an organization, and theories that are more specific to gender and change management the firefighters talk about gender and gender equality are analyzed. Essay results were collected through interviews with seven firefighters and then analyzed and interpreted with the help of theories.The analysis shows that there is a perception among the firefighters that men and women are biologically different and that required physical strength legitimizes the exclusion of women. Inequality is seen as something natural and by pursuing an active gender equality women are given unwarranted benefits. When physical strength becomes a legitimate reason for exclusion, the responsibility for gender inequality is put on women and that women don?t have what it takes.There is also a resistance against gender equality analyzed in the paper, and it's stated opposition seems to be directed against the management's way of recruiting women.

The competitive nature of the automotive industry has always implied a necessity to improve product development concerning time-to-market, cost and product quality. As capacity of computer-aided engineering (CAE) tools has evolved, so has the strive for simulation-driven design. Virtual durability testing using full vehicle models is one of many challenges posed in front of vehicle manufacturers when computer simulations are given a key role in product development.This thesis has been initiated as a preliminary step towards implementing dynamic virtual durability testing in the development of buses and coaches at Scania. The objective has been to assess the predictability of a full vehicle coach model and to what level of precision structural loads can be predicted. Previously performed proving ground testing of a Scania Touring coach has been the basis for the modelling and simulations in this thesis.A virtual model of the Scania Touring coach has been created in multi-body simulation software package MSC.Adams.

The purpose of this thesis has been to develop a tool for modelling and simulating the nuclear plant Ringhals 3. The model should be used to improve the knowledge on the dynamics of the plant. Ringhals 3 is being upgraded to produce more power and a tool for analyzing the new operating conditions is needed.The work in this thesis has consisted of improving and developing an existing model of Ringhals 3 made with the modelling tool Dymola. The model has been validated by comparing the results of a simulated house load transient with data from the actual plant. Validation shows good agreement with data from the real plant.

The purpose of this thesis has been to develop a tool for modelling and simulating the nuclear plant Ringhals 3. The model should be used to improve the knowledge on the dynamics of the plant. Ringhals 3 is being upgraded to produce more power and a tool for analyzing the new operating conditions is needed.The work in this thesis has consisted of improving and developing an existing model of Ringhals 3 made with the modelling tool Dymola. The model has been validated by comparing the results of a simulated house load transient with data from the actual plant. Validation shows good agreement with data from the real plant.

The purpose of this thesis has been to develop a tool for modelling and simulating the nuclear plant Ringhals 3. The model should be used to improve the knowledge on the dynamics of the plant. Ringhals 3 is being upgraded to produce more power and a tool for analyzing the new operating conditions is needed.The work in this thesis has consisted of improving and developing an existing model of Ringhals 3 made with the modelling tool Dymola. The model has been validated by comparing the results of a simulated house load transient with data from the actual plant. Validation shows good agreement with data from the real plant.

This work aims to obtain information on diurnal variations of aerosol concentrations in thecity of Lund (Sweden) and trying to locate the origin of the aerosols long distance transports.The study shows that the aerosol concentrations varied quit strongly over the entiremeasurement period, reflecting air masses of different degrees of pollution, mainly as a resultof the diurnal rhythm of the traffics. Trajectories reveals that air masses originated inSoutheastern and Eastern Europe contains higher aerosol concentrations compared to other airmasses..

ABSTRACTBackground: Most cases of lumbar disc herniation are asymptomatic. When symptomatic, LDH may cause a significant physical and mental distress. Initially, most patients are treated conservative but sometimes operations may be required.Aim: The aim of this study was to provide a review of the scientific basis of physiotherapy, including behavioural therapy, as a treatment to lumbar disc herniation regarding pain, function and the size of disc herniation in people suffering from lumbar disc herniation.Method: Four databases were used in the searches of literature. Assessment of the validity of the studies was done with the PEDro-scale and valuation of evidence rate was made according to guidelines made by the Swedish Council on Health Technology Assessment (SBU).Result: Nine RCT-studies were included with a total of 713 participants. The scientific basis is moderate to support a pain reduction and limited regarding improvement of physical function when it comes to physical exercises, including MDT.

Aim and questionsThe purpose for this study was to investigate how marks and mark settings are formed in physical training at some compulsory schools. We also wanted to see how the criteria for marks are formed. These were the main questions during this study.? How do the students find the evaluation and the making in physical training?? Are there differences between different student groups when it comes to their experience around estimation and marking in physical training? (gender, marks, schools etc.)? How do the teachers motivate their marking in physical training?? Are there any differences between the criteria for marking between different schools?MethodThe study was carried out during the spring 2005 at eight schools in a municipality in the middle of Sweden. The study involved 339 students opinion polls and 12 teacher opinion polls.

BACKGROUND: The relationship between physical activity and health versusphysical inactivity and poor health are well known. Ethnic minorities are generallyless physically active than the residence country's majority population andgenerally have a poorer health status. The study has a health promotion perspective.PURPOSE: The purpose of this study was to describe factors that influencephysical activity among middle-aged and older persons, belonging to an ethnicminority. METHOD: The method used to answer the purpose is a literature-basedstudy. The searching for literature has been carried out in a systematic way.Scientific articles to base the results on, has been gathered from various databases.Included articles were analyzed with a qualitative content analysis and identifiedsimilarities and differences in the content were divided into themes and categories.RESULTS: Recurrent themes in the literature, that influence physical activity inmiddle-aged and older people that belong to an ethnic minority, was support, healthand illness, external factors, internal factors, community related and socioeconomicfactors and ignorance and beliefs.

This paper examines the power producing dams along the Ume-river as an integral part of and a result from the urbanization process in Sweden during industrial capitalism. The aim of the paper is to contribute to the knowledge of the urbanization process in Sweden in general and of its traces along the Ume river in the county of Västerbotten in particular. The paper applies the theory of concentrated urbanization and extended urbanization put forward by Neil Brenner and Christian Schmid (2015) and argues that the building of power producing dams along the Ume-river is part of an extended urbanization process. This becomes particularly evident when examining the vast physical structures that is the dams, situated in an otherwise remote and sparsely populated area. These vast physical structures are also very well connected to a nation wide electric grid that has connections to bordering countries as well.

The purpose of this thesis has been to develop a tool for modelling and simulating the nuclear plant Ringhals 3. The model should be used to improve the knowledge on the dynamics of the plant. Ringhals 3 is being upgraded to produce more power and a tool for analyzing the new operating conditions is needed.The work in this thesis has consisted of improving and developing an existing model of Ringhals 3 made with the modelling tool Dymola. The model has been validated by comparing the results of a simulated house load transient with data from the actual plant. Validation shows good agreement with data from the real plant.

The purpose of this thesis has been to develop a tool for modelling and simulating the nuclear plant Ringhals 3. The model should be used to improve the knowledge on the dynamics of the plant. Ringhals 3 is being upgraded to produce more power and a tool for analyzing the new operating conditions is needed.The work in this thesis has consisted of improving and developing an existing model of Ringhals 3 made with the modelling tool Dymola. The model has been validated by comparing the results of a simulated house load transient with data from the actual plant. Validation shows good agreement with data from the real plant.