This report is a result of a bachelor thesis at the school of Architecture and the Built environment (corresponding to 15 HP) and is written during spring 2012 at the Royal Institute of Technology (KTH) in Stockholm. The Bachelor's essay is based on the design and dimensioning of a house which is located at a predetermined site in Malmo, Sweden.The idea is to construct a house that is appropriate to use for an average Swedish family of four family members. The house is designed in a modern way with respect to ease of access and disabled facilities. The installation that have been considered are heating, ventilation, sanitation and electricity. Construction calculations and material selection are also discussed.Furthermore, a study about Photovoltaic cells has been done.

The energy that the earth receives from the sun hourly has potential to cover a year?s energy demand in the world. Further, this type of energy is environmentally friendly, natural and free of cost. This report covers solar energy in an urban environment and consists of a case study of installations of Photovoltaic cells in a part of the city of Stockholm. It is mainly the economic aspects that are covered but there is also a discussion about the practical consequences and the sustainability as a result of integration of solar energy in an urban environment. The aim of the study is to present results from economic calculations for utilization of solar energy in chosen buildings in Kungsholmen in Stockholm.

One of the city of Stockholm?s main objectives is to have a society completely free from fossil fuels. To achieve this, several investments regarding improvements in energy efficiency and renewable energy are currently being planned or implemented. One of these investments is a project called Hallbara Jarva which is located in the suburbs of Stockholm. The purpose of this thesis is to examine the prospects of an investment in Photovoltaic cells from an energy-saving and economical point of view. The analysis is limited to three buildings within Hallbara Jarva and is intended for the property owner.  Solar energy is a type of renewable energy source and is commonly divided into solar heating and solar power.

This candidate thesis contains the possibility of expand the Swedish photovoltaic market through photovoltaic cooperatives and a photovoltaic exchange. In the current situation there is a lot of problems with production of electricity from photovoltaic, that?s why we show some possibilities how to avoid these. To understand the problem with photovoltaic produced electricity we first give you a background.We show how to expand the Swedish photovoltaic market by describing how a photovoltaic cooperative and photovoltaic exchange could work in Sweden. It have been confirmed from our market research that the interest of photovoltaic cooperative and exchange is high.To find out how profitable photovoltaic is in Sweden, have three projections been made.

The goal of this paper is to find out how solar cells can improve energy efficiency on-board M/S Sydfart. The paper is based on a number of energy measurements on board the M/S Sydfart. The solar surface is calculated by measuring the available space for installing solar panels. Global radiation data is taken from STRÅNG's database, the data is then used to calculate the theoretical power produced by the solar cells. Energy efficiency is analysed in two ways.

This paper goes through solar energy and what uses it has. It is also a guide in the choice of solar collectors forthe real estate that I have drawn for the thesis work.Solar energy is a renewable source of energy from the Sun's light. Energy can be used to produce both heat andelectricity through solar collectors and solar cells. Some of the benefits of solar energy is that it is completely freeto extract, environmentally friendly and virtually maintenance-free. Disadvantages are that the technology isexpensive, does not cover the entire energy needs and takes a long time until it pays.

Today, buildings utilize 40 % of the total energy consumption. New energyrestrictions and directives have entered the construction industry. Photovoltaic is asustainable, clean and quiet solution that integrates well in the urban environment buthave not yet reached a breakthrough on the Swedish market. The conditions for solarenergy production are often set in the early planning stages where they rarely arebeing prioritized.This master of engineering project focuses on identifying problems regardingimplementation of photovoltaic in city development projects and giving suggestions topossible improvements in the planning- and construction process. It also givesrecommendations on how the conditions for energy production can be optimized inthe early zoning stage.By conducting simulations with PVsystV5.21, on three ongoing city developmentprojects in Umeå, Malmö and Stockholm and by carry out and analyzing interviewswith city planners, constructors and architects, some conclusions have been made.Several improvements, both politically, with changes in the subsidization systemand/or instatement of a new law with feed-in tariffs, and within the solar- andconstruction industry itself, with better communication between different parts of theprocess as well as better use of experience, can be made.

This thesis has been carried out in New Zealand in collaboration with the University of Waikato. In association with Dr. Mike Duke the purpose of this work is to investigate whether two different software for modeling of photovoltaic systems are useful in the teaching of solar energy.The next ten years grid-connected photovoltaic systems are assumed to increase and therefore also a rising demand for people with engineering knowledge are to be predicted. For engineer students with a focus on solar energy a more practical teaching with design software´s can be a good method to make the students comprehend more when it comes to large scale photovoltaic systems and be more prepared for working life.The software´s used is called Transient System Simulation (TRNSYS) and Photovoltaic Systems (PVSYST) which are both well used throughout the world. To assess the reliability of the software´s, a reference solar power plant at 16.1 kWp installed capacity are used, which consists of photovoltaic modules from four different manufacturers.

The goal of this paper is to find out how solar cells can improve energy efficiency on-board M/S Sydfart. The paper is based on a number of energy measurements on board the M/S Sydfart. The solar surface is calculated by measuring the available space for installing solar panels. Global radiation data is taken from STRÅNG's database, the data is then used to calculate the theoretical power produced by the solar cells. Energy efficiency is analysed in two ways.

This examination paper is about the potential for Solar cells on apartment blocks. The technology with using solar cells for manufacturing electricity, has been on the market for a while, but recently the new installations of solar cells has increased. Solar cells are suited for placements on buildings but are expensive to obtain. The municipal real-estate company is interested in solar cells but wants to know more before they invest in the technology. This report contains an account of the solar cell and a guide to how a connection to the grid is accomplished.

Suggestion for a new operahouse in stockholm, förslag på nytt operahus i stockholm. Stockholmsoperan..

This literature study aims to examine the existence of cancer stem cells in breast cancer. The cancer stem cell theory states that there is a hierarchical organization within a tumour, in which a small subpopulation of the cells can initiate new tumours and maintain tumour growth whilst the bulk of the tumour cannot. These tumour initiating cells have shown to possess many characteristics similar to those of adult stem cells, which is why they are often referred to as cancer stem cells. Both cell types have the capacity of asymmetric division and have shown to possess mechanisms of resistance to both apoptosis and cancer drugs. The cancer stem cell theory elucidates many biological aspects such as the heterogeneity of tumours and the relapse of many cancers after what appeared to be successful treatments.

Photovoltaic Systems in Sweden has longbeen heavily dependent on subsidies and grants to bring in a profit for the investor. Production of excess electricity is a major reason for this as the compensation for excess electricity today is low. However, there are businesses that have an electricityneed that are particularly suitable for solar electricity. These businesses have an electricity demand when the sun shines the brightest and if the Photovoltaic System is properly scaled, the excess electricity can be minimized. A golf club is that kind of a business and this thesis aims to examinate the solar power potential for golf businesses in Sweden.Nine golf clubs was selected from different locations in Sweden.

In Sweden there is a large interest in renewable energy but the market for solar power is still small compared to other countries such as Germany. Here many farmers produce their own electricity. The Federation of Swedish farmers have acknowledged the potential for Swedish farmer to produce electricity and there is an interest among the farmers. The agricultural branches in Sweden most suitable for solar power are pig production and poultry due to the even electricity need throughout a year. Swedish pig farmers are going through a period of unsteady profitability which makes it interesting to see whether producing their own electricity can affect the economic situation.

Vectors based on lentivirus backbones have revolutionized our ability to transfer genesinto many cell types. Lentiviral vectors integrate into the chromatin of target cells and do not transfer any viral genes causing vector replication. Both of these features arecommonly used in gene therapy and have been used clinically in individuals sufferingfrom cancer, infections and genetic diseases. It has been discovered that T-cells can be genetically modified to be used as effective weapons against cancer: therefore virus mustbe produced to deliver the gene of interest into the T-cells. In this project, lentiviralvectors have been produced to transfer the gene coding for a chimeric antigen receptor(CAR) which is directed to CD19 on B-cells.