Simulation of different systems can be done using a graphical model description of the system based on block diagrams. The simulation software Matlab/Simulink offers a lot of possibilities to describe a huge number of systems, which can be linear as well as nonlinear. The simulation using Matlab/Simulink is done by integration based on different kinds of numerical methods.When nonlinear Simulink-models are simulated, it is often interesting to apply a Kalman filter to handle the noise that may occur within the process as well as corrupting the measurement. However, application of such a filter leads to an extensive time-consumption despite using fast computers. The reason is that the existing Matlab functions are not constructed for time optimal evaluation.

Sweden became a member of the European Union in 1995. Consequently Sweden became obligated to implement the Working Time Directive 2003/88/EC (formerly termed 93/104/EC). At that time Sweden considered that their legislation already gave their employees as high level of protection as the directive prescribed. Instead they decided upon an adjustment of the collective agreements concerning working time. A particular EC-restriction was incorporated in the Working Hours Act (SFS 1982:673).

Evaluation of machinery costs is necessary for selecting appropriate farm machinery. Timeliness cost due to untimely operations is an important component of machinery costs. Timeliness costs can be high for crop sprayers, since pesticide application must be carried out within a short time interval. This Master thesis investigated the timeliness cost and the probability of a suitable workday for spraying. Timeliness factors were estimated for four different crops (oats, spring wheat, winter wheat and barley) using historical weed trial data.

There are several energy systems in the Swedish society and to ensure the comfort and health of the citizens it is of importance that the different energy systems are functioning properly. District heating is one of these energy systems and many household depend only on district heating to warm up their homes. District heating is dependent on several processes where every step needs to function in order to deliver the produced heat to the end consumer. Previous studies have investigated the distribution of district heating and how to make customers choose district heating as their heating method. The supply of fuel to the district heating plant has not been studied as much, even though it is an important part of the whole system. This thesis is a part of the project NORD-STAR (Nordic Strategic Adaption Research), which has focused on climate adaption in the Nordic countries.

Det är mycket viktigt att förhindra att bekämpningsmedelsubstanser läcker ut i miljön och orsakar skada. Lagstiftningen kräver därför att läckaget av bekämpningsmedel från odlad mark minskas. Olika myndigheter och organisationer har olika ansvarsområden beträffande bekämpningsmedel. Bekämpningsmedelssubstanser kan, om de inte hanteras rätt, vara skadliga och därför finns det tydliga bestämmelser om hur dessa substanser ska hanteras. Många oberoende undersökningar visar tydligt på att det förekommer läckage av bekämpningsmedel i samband med att de används i behandlingar av odlad mark. Undersökningar har pågått under lång tid både i Sverige och i andra länder. Ett flertal åtgärder och metoder mot läckage av bekämpningsmedel från odlad mark har framtagits och utvecklats som radikalt kan minska läckaget av bekämpningsmedel.

Pigs are often mentioned as relatively intelligent animals when compared to other nonhuman species. Despite this knowledge, the vast majority of pigs are kept under conditions that lack opportunities to satisfy their cognitive needs. Therefore, a need to evaluate the present scientific studies about pig cognition was acknowledged, in order to evaluate to what extent the knowledge is applied in the husbandry of finishing pigs. If a considerable lack of application was determined, suggestions about how to use the obtained information to improve pig welfare were also to be made. A synthesis of the present literature was made, and it could be concluded that a considerable amount of studies had been carried out in the present area. The pigs of today appear to have the same behavioural and cognitive needs as their ancestor, the wild boar.

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

The tourism industry in Sweden has expanded in recent years and the increasing industry has meant that customers are in need of a reseller for their trips abroad. Today there are three types of retailers available. These are : Traditional travel agencies , tour operators and online travel agencies.Online Travel agencies are the most modern online option for customers. Their existence has made it easier for the customer and reservation can be made anytime and anywhere. The competition has intensified between the three retailers and the traditional alternatives must find new ways to survive.

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

The aim of this thesis is to examine how the identity of the public librarianwith regard to reading is manifested in the library field. The approaches thatare taken to reading and readers are examined as well as the consequencesdifferent approaches might have. The empirical material is based on 93articles published in Swedish library journals. The theoretical andmethodological starting point is discourse analysis. The application ofdiscourse analysis according to Michel Foucault?s hypotheses reveals threediscursive formations regarding the professional identity of public librarianswithin the framework of reading promotion: The public librarian asguarantor of democracy is related to the public library's original mission offostering, cultivating and educating citizens.

Abstract Title: Total Cost of Ownership ? Revealing the true cost of owning and operating equipment. Authors: Anna Bladh Anna Ström Tutors: Michaela Boye, Parts and Service, PTD, Alfa Laval Göran Berg, Parts and Service, PTD, Alfa LavalCharlotta Johnsson, Department of Automatic Control, LTH, Lund UniversityBertil I. Nilsson, Department of Industrial Management and Logistics, LTH, Lund UniversityCarl-Henric Nilsson, Department of Business Administration, Lund University Core issue: ?Which costs should be included in a general Total Cost of Ownership model regarding centrifuges, and what input variables are needed in order to calculate those costs in a user-friendly way and with a maintained level of accuracy?? Purpose: The theoretical purpose of the thesis is to identify the cost items that have the greatest impact on a TCO calculation for a centrifuge.

Allt eftersom utvecklingen går framåt inom applikationer och system så förändras också sättet på vilket vi interagerar med systemet på. Hittills har navigering och användning av applikationer och system mestadels skett med händerna och då genom mus och tangentbord. På senare tid så har navigering via touch-skärmar och rösten blivit allt mer vanligt. Då man ska styra en applikation med hjälp av rösten är det viktigt att vem som helst kan styra applikationen, oavsett vilken dialekt man har. För att kunna se hur korrekt ett röstigenkännings-API (Application Programming Interface) uppfattar svenska dialekter så initierades denna studie med dokumentstudier om dialekters kännetecken och ljudkombinationer.

An increased number of participants in the construction industry is asking for accompanying terrain models to the project in order to get a better understanding of the field. When the desire to create buildings that fit together nicely with the surrounding area is increasing, it becomes more and more important to have a broad base of knowledge about the ground on which the building is to be erected. Terrain models are also very useful in the planning of logistics, documentation for landscape architecture projects, and billings for mass calculations.Surveys for creating terrain models can be performed with laser scanning. The advantage of laser scanning is the time-effective surveying, the detailed information as well as the ability of application in complex environments resulting in a cost-efficient project. With this in mind our thesis was defined in collaboration with the company Bjerking AB in Uppsala in order to investigate if there were any softwares suitable for terrain modeling.