The division of Electricity at Uppsala University runs a project called Lysekil project, they have designed a buoy that uses the waves to create electric power from a generator attached to the bottom of the sea.Uppsala University is closely connected with the company Seabased and the university makes use of their facilities in Lysekil. When they designed the buoy issues occurred, the geometric design was flawed, brackets with a short shelf life and it is generally uneconomic.A study visit was done in Lysekil on Seabased facility. With this visit the project started, which is to improve the design of the buoy and the attachment of wires leading to the generator. In this project we have chosen to use a beam system with three beams that are attached to the buoy. Then a wire attached to a plate that sits between the beams will be leading to the generator. Two proposals for construction are created, what distinguishes them are the brackets between the beams and the buoy.From these constructions, the design that is considered most optimal for our project is chosen.All parts of the buoy have been modeled and the drawings are designed in ProEngineer software.The two constructions are compared with each other, but the whole focus is on the second and final structure. The report begins with an introduction describing Lysekil project, and a task description of our project.The project aims to produce an optimal buoy that will be easy to design, materials restrictive with good durability and an economical solution.Wave power true function has been studied, mechanical and finite element analysis of beams, buoy and plate design.This has been presented in this report, where in the various chapters can read more about the processes. Although the relevant facts and information on this project and buoy development is included.

The county hospital of Dalarna has for the last couple of years carried through a process of digitalization. The result is that within the county it exists image plate systems from two different manufacturers. In an attempt to create a tool for dose optimization and dose surveillance the county of Dalarna would like to investigate if the exposure index from Agfa and Fuji is suitable as a dose indicator. An investigation of the exposure index, S, from Fuji has already been done. This thesis has been continuing the investigation by evaluating the stability of the exposure index, lgM, from Agfa.

This report will examine various solar energy technologies in order to decide if they could be applied in the Royal Seaport. The Royal Seaport is a Swedish urban district under development in Stockholm, with the goal of becoming a sustainable district. Two main techniques, solar collectors and solar cells, including sub-categories, are addressed in this report. Another sub-category, a hybrid system, will also be mentioned. The main difference between solar collectors and solar cells is the type of energy produced by the system.

In this thesis, a transparent model of the human head has been constructed which was filled with a substance that represented the brain. This model was later crash tested. This was done in order to examine how a transparent model of the human head can be constructed to generate accurate data from crash tests. It was also done in order to examine how impacts on the front of the head can deform the rear of the brain. When a head is decelerating, the brain moves forward inside the skull and may hit the front of the skull.

In this thesis, a transparent model of the human head has been constructed which was filled with a substance that represented the brain. This model was later crash tested. This was done in order to examine how a transparent model of the human head can be constructed to generate accurate data from crash tests. It was also done in order to examine how impacts on the front of the head can deform the rear of the brain. When a head is decelerating, the brain moves forward inside the skull and may hit the front of the skull.

Avdelningen för reaktorteknologi på Alfa Laval har identifierat svårigheter vid förmedlingen av kunskap till potentiella kunder. Examensarbetet innefattar utveckling och produktion av en film avsedd för utbildning och marknadsföring av Alfa Lavals flödesreaktorer, ART® Plate Reactors, för att förbättra Alfa Lavals sätt att förmedla kunskap till och fånga intresse hos potentiella kunder på mässor.Målet med examensarbetet är att filmen ska användas på kemiteknikmässor där reaktorerna ställs ut, och syftet med arbetet var att med mässbesökarnas förkunskaper som bas utveckla en film som väcker intresse och samtidigt fungerar som ett lärandemedel.Genom intervjuer har information om hur mässor går till, önskemål om filmens utformning, samt bedömning av besökarnas förkunskaper samlats in. Dessa intervjuer, samt litteraturstudier inom området för kemiska reaktorer och lärande med animation och kommunikation på mässor har legat till grund för arbetet med framtagandet av filmen.En storyboard utvecklades, och lade grunden för produktionen av filmen som gjordes i samarbete med filmbyrån Upper/First i Malmö. Produkten av examensarbetet, filmen, finns att se påhttp://youtu.be/PyoX3mVXuYc.Nyckelord:Storyboard, Multimodalt lärande, Kontinuerliga flödesreaktorer, Reaktorteknologi, ART® Plate Reactors.

Stabilization of subgrade is an internationally common technique to improve the characteristics of a soft soil. Improving the stiffness and bearing capacity of the subgrade enables the pavement to be designed with reduced depths of subbase and basecourse aggregates. This makes the stabilization technique both economically and environmentally interesting. Both natural and stabilized soils have high inherent property variability that should be considered when the characteristic value is derived. By analyzing the spatial variability in stabilized and natural subgrades it is possible get the parameters needed for reliability?based modeling of soil properties.

AbstractThe purpose of this study is to examine how children interact with each other and what social positions they assume when using the learning pad. The social positions reffered to is the Owner, the Participant and the Spectator, defined by Ljung Djärf (2004). According to Ljung Djärf (2004), the Owner is defined as the one in control of the mouse and keyboard. The Owner is expected to be in charge of what is happening on the screen. The Participant is typically found on a chair near the computer.

The aim of the thesis is to analyse and understand resolution, repeatability and reproducibility of the measurement system for package distance. The measurement system for package distance is already in use, no Gage R&R has been performed on the system and before spreading use of the system the quality of the system has to be understood and approved.

I dagens samhälle projekteras alltmer komplicerade byggnader, samtidigt som projekteringen av den enskilda byggnaden skall ske i en allt snabbare takt. Detta har onekligen bidragit till att det blivit allt vanligare med datoriserade hållfasthetsberäkningar, som ofta baseras på finita elementmetoden istället för de klassiska handberäkningmetoderna. Frågan som många då ställer sig är huruvida resultaten skiljer sig åt mellan de olika beräkningsmetoderna, och i så fall på vilket sätt? För att kunna besvara denna fråga har detta arbete inletts med en genomgång av de klassiska handberäkningsmetoderna, vilka bygger på gränslastteori. De viktigaste egenskaperna för varje metod har redovisats och förklaras.

In Sweden there are 1894 small-scale hydropower plants in operation, which together generate 4.3 TWh of electricity per year according to Swedish hydropower compound (SVKF, 2011). This corresponds to the annual consumption of about 860,000 Swedish households (based on an annual consumption of 5000 kWh). In the mid-1950s there were around 4000 small-scale hydropower plants in operation in Sweden before cheap fossil fuels and uranium competed with them, in the current situation only 1,894 of these are in use. If slumbering small hydropower plants once again would be taken into use and some new ones are built, we would be able to extract about 7 TWh of renewable electricity from these annually in Sweden, representing about 1.4 million households.The thesis intends to calculate and construct a hydroelectric power plant at the existing dam in Olofsfors and give suggestions on how the power station should run during the time that fish migration is greatest in Leduån.The turbine and generator to the station in Leduån at Olofsfors is designed by the height of the fall and the water flow through the dam. The turbine selected for the station is a CK-1000RM turbine with a 4-pole 250 kW generator from Cargo & power turbine Sweden AB, which is expected to deliver 1.2 GWh per year.

When an error occurs in an IT system that is vital for the production of a major industry, the consequences can be great. To quickly identify and correct errors is important as a stop in a system can lead to a break in production, which is costly for the industry. Our task in this thesis has been to develop a system for ÅF that facilitates the debugging process of the system Paperline. The system's target audience is ÅF-call personnel that provides support for Paperline 24 hours a day if something goes wrong. The system consists of a Windows service, a database and a web application and is developed mainly with the techniques C#.NET, MVC 5, Google Charts, Javascript, HTML, CSS, and Entity Framework.

Arbetet undersöker grafikkortets lämplighet att tolka L-system i realtid. L-system är ett strängomskrivningssystem som beskriver strukturen hos botaniska former. Lsystem tolkas med hjälp av sköldpaddstolkningen för att få en geometrisk tolkning. För att utvärdera om grafikkortet är lämpat att tolka L-system i realtid har två system implementerats. Det ena systemet tolkar L-system på processorn och det andra systemet tolkar L-system på grafikkortet.

Thermia Värme AB is one of the market leading manufactures of heat pumps. In order tomaintain this position, the company wants to improve the vibration characteristics of theirproducts. The aim of this thesis is to develop product design changes that lead to a reductionof vibrations in the heat pump Thermia Diplomat 8.The main cause for vibrations in the system is flow pulsation and mechanical forces inducedby the scroll compressor. Vibration is transmitted through the compressor piping and receivedby the heat exchangers, from where it is further transmitted to the connection points for theradiator and heat source circuits.A number of design changes in order to improve the vibration characteristics have beenevaluated through calculations and practical experiments. The changes have included thecompressor and heat exchanger mountings, the compressor suction and discharge line pipingand also pulsation dampening.The results of the experiments show that the vibration levels in the connections for the heatingand brine circuits can be decreased strikingly through changes in suction and discharge linepiping.

This report describes a study, description and testing of parts to an application adapted to the operating system Android. The application is supposed to measure the distance to a car ahead. Apart from distance measurements the ability of the application to calculate its own speed with the help of GPS is tested. From these two parameters, speed, distance and some constants the theoretical stopping distance of the car will be calculated in order to warn the driver if the car is too close to the car ahead in relation to its own speed and stopping distance.Tests were conducted on the different applications that were programmed and the result showed that the camera technique in the mobile phone itself limits the maximum distance of the distance measurement application. The max distance the tests in this thesis revealed was approximately 5 meters.