The overall purpose of this essay is to come to a deeper understanding about videos in the Youtube beauty community by using a mixture of qualitative and quantitative methods. By answering the main questions of the essay which are; What quantitatively measurable components are there in the videos that can be seen as contributing factors leading to the fact that some generate more views that others?; Is there a set mold for success containing certain aspects that a video must have to stand out?; What correlations can be found between the two categories of analysis and how do these potential correlations affect the popularity of the video? and What effects do specific components on the level of popularity of the video?, we?ve been able to distinguish differences as well as similarities on both qualitative and quantitative levels. We have also seen that using the two methods together have enabled us to reach more profound results. The main result that we have found on a quantitative level is that there are obvious correlations between a high level of popularity and a good visual quality.

The purpose of this thesis project was to study how different companies are working with LastTime Buy and through that study propose improved ways of working with this for Scania CVAB. The project aimed at studying the work processes from three different perspectives:decision models, quality aspects and liability aspects between companies.To study this, qualitative interviews with one or several representatives from differentcompanies that are affected by or involved in Last Time Buy were used. Representatives wereselected partly from Original Equipment Manufacturers, suppliers, component manufacturersand companies offering third part solutions for Last Time Buy. The companies also reflecteddifferent industries. The interviews aimed to create an understanding for the methods used atthe different companies but also the ways of thinking and the knowledge behind the choice ofthese working methods.The analysis shows that the Original Equipment Manufacturers used very similar decisionmodels for Last Time Buy, but that external factors or the company strategy made them reachdifferent results.

The aim with the project was to portray something to step on. Its purpose has been to experiment and explore the interaction between pattern, structure, material and colour for something to be applied on a floor. Focus has been on esthetic expression and not the creation of some¬thing for a specific environment or audience. My goal was also that this project would illustrate the importance of the floor to create a certain atmosphere in a room.The project was divided into three phases. The first one was the experimenting and exploring phase, where the goal was to find an expression.

At Forsmark nuclear power plant a new course called "education in everyday safety" has been started in an attempt to improve the safety culture. The goal is to spread the of expectations and approach the maintenance management has set, to all employees working at the plants. During the course, theory is mixed with practical tasks to reach a common view how work should be done to achieve safety for the plant and the people that work there.The practical tasks are done inside "maintenance simulators". They are built inside 20 ft containers which contains two dummy pipe systems. On the pipe systems some valves, a flow meter and a pump has been installed.

A degree project has been carried out at Motion Control, Västerås. The degreeproject ?Grafisk Skärm för Inbyggda System? have developed a first prototype of anembedded system with a display, a graphical user interface with touchscreen andpossibilities to communicate with external units.The work initiated with surveys of critical components. A technical specification forthe desired end product was developed. With the technical specification as support,design specifications for hardware and firmware were developed.After the specifications were done, a circuit diagram was developed and a circuitboard was made.

This paper is a morphological structure-analysis of icelandic tales to determine their common and distinguishable components in relation to one another and to the russian folktale with Vladimir Propp?s book Morphology of the Folktale (1968) as theoretical basis. The paper looks at the Poetic Edda and Njals saga and the functions of the actions for each other and for the story as a whole. Although the icelandic tales shows great similarities with the russian folktale in general, it also shows deviations. The functions have sometimes appeared on inverted positions, and in a full third of the stories the evil has won over the good in a crucial struggle, but has in 90 % of these stories still been punished before the end.

The increasing complexity in the development of a configurable real-time system has emerged new principles of software techniques, such as aspect-oriented software development and component-based software development. These techniques allow encapsulation of the system's crosscutting concerns and increase the modularity of the software. The properties of a component that influences the systems performance or semantics are specified separately in entities called aspects, while basic functionality of the property still remains in the component. When building a real-time system, different sets of configurations of aspects and components can be combined, resulting in different configurations of the system. The temporal behavior of the system changes and a way to ensure the predictability of the system is needed.

Every year, KTH participates in the Shell Eco Marathon, a competition whose goal is to design a vehicle that can go as far as possible using only the equivalent energy of one liter of petrol fuel. This year, one of KTH?s contributions to this race is the Agilis prototype; a car powered by a uniquely configured HCCI-engine developed at the university. The engine is dependent of several subsystems in order to work properly, among other, systems for cooling and lubrication.Combustion engines are in need of a cooling system that reduces the heat developed during the combustion. In general, two main types of cooling systems are employed; either air cooling, where the outside of the cylinder is exposed to a flow of the surrounding air, ore water cooling, where water flows in tubes around the engine, and the heat are transferred by the water to the surrounding air through a heat exchanger.The purpose of the lubrication system is to prevent the friction that builds up in the interference between moving parts in the engine.

This thesis has treated a three-axis robot which task is to serve a larger test machine tomove the modules to be tested, from the storage to the test site. The robot is composed ofthree linear actuators; two standard components of ball screw type and a custom-builtactuator of trapezoidal type. The work has mainly focused on the custom-built device to seeif it could be replaced with a standard component. Part of the work has been to look into thepicking tool and to see if there are any possibilities to improve its function.The report presents two different proposals which I decided to call Robot 1 and Robot 2 andthey aim to address the problems arising in the purpose-built linear unit and the X-axislinearity problems. Robot 1 focuses on eliminating the problems that arise around therobot's X-axis, with such simple means as possible and without making excessive materialchanges.

The dependency of continuous electricity supply is high in the Swedish society today, at the same time no one is willing to pay for a too costly or over dimensioned power distribution system. The owners of the distribution systems are the ones responsible for this balance act of maintaining a high quality of electricity delivery to customers at a reasonable cost.In this master thesis a limited part of the primary distribution system (10 kV), owned by Mälarenergi Elnät AB and located in the city centre of Västerås, was chosen for a deeper analysis of its reliability. Its ability to handle outages of system components (N-1 and N-2 contingency analysis) was investigated to find out potential weak spots and parts of the grid that showed signs of being overdimensioned.The results of the performed simulations showed that in 74 % of the studied N-1 contingencies cases, consisting of outages of a bus bar in a distribution substation, the system could handle this without causing outages in other parts of the grid. For the N-2 contingencies 61 % passed the test. It was also found that one of the two included high voltage substations could alone supply the investigated part of the grid.

Entrepreneurship is considered essential for the Swedish economy, as well as globally. Accordingly,massive efforts are put into creating environments that successfully can support new ventures. The business incubator is a prominent part of these efforts and is important especially for the knowledge shared within its internal network. The aim of this study is to further explore how different activitieswithin the incubator can influence the interaction, and thereby the construction of social capital,among the incubatees. Using a qualitative case study of three incubators, and the framework of theincubator model, it is concluded that three distinguishing components within the framework influence the interaction, namely infrastructure, mediation and business support.

The environmental debate is more intensive than ever before and the demands on companies increase. There are a number of methods to make it easier for the companies to fulfil the demands. Life Cycle Assessment (LCA) end ecodesign are some of the methods that can be used. Syntronic AB has the possibility to reduce the products´ environmental impact in the design phase. Therefore it is important for the company to make it possible to visualize the negative environmental impacts a product can cause in an easy way. It is also important to visualize for there clients if any improvement is possible. The purpose of this thesis is to develop a simplified model.

Research where personality in animals is studied is becoming more and more common. In this area there are different concepts like behavioural syndrome and animal personality and they usually talk about consistency in behaviour over time and situations. This consistent individual behaviour can be used as an indicator of how individuals can handle and adjust to new situations in the environment. Because of this, personality studies in animals are very important in animal welfare. In this study personality in dairy cattle in lose housing were studied.

Seabased Industry AB develops system for extracting electrical energy from ocean waves with a Wave Energy Converter (WEC). The components is bought from subcontractors and then assembled into wave energy converters, buoys and marine substations by Seabased. In the future Seabased will produce more of the components themselves to reduce costs and to have better control over tolerances. The production line will also include the painting of the WECs and substations, which is performed in a painting line.The purpose of this thesis work is to study what is required to build a painting line, regarding the types of stations, transporting types and the space needed. This will result in layouts for the painting line.To receive the necessary information about production theory and corrosion and surface treatment, literature concerning this area has been studied.

Master thesis work at ITN (Department of Science and Technology) in the areas of A/D-construction and RF-circuit design. Major goal of project were to research suitable possibilities for implementations of direct conversion in transceivers operating in the 160MHz band, theoretic study followed by development of components in the construction environment Cadence. Suitable A/D- converter and other important parts were selected at the end of the theoretic study. Subsampling technique was applied to make A/D sample requirements more realistic to achieve. Besides lowering requirements on A/D-converter it allows a more simple construction, which saves more components than subsampling adds.