The production costs have steadily increased within the construction industry during the 21st century. Voices are raised meaning that the construction industry is too unsuccessful in making the production more efficient and to develop it?s way of working. One way to deal with the production costs is to minimise the waste, with waste meaning activities that doesn?t add value to the finished product.

X-rays are a potential risk for animal health care personnel. The present study will examine the risks for scattered radiation to the personnel, if no lead gloves are used when holding an animal during the x-ray examination. Furthermore, how the impact of the exposure values and body parts examined, affect the scattered dose to the hands of the holder. Also, the distance between the animal and the hand that holds it was evaluated to see the impact on scattered radiation exposure. Tested by a survey, to animal health care students, the frequency of the usage of lead gloves in Swedish animal hospitals was studied. According to the results from the analysis, animal health care personnel don't need to use lead gloves every time they hold an animal or a cassette during x-ray examinations.

Background: An effective management of the healthcare's organization on one disaster site is considered as a condition in order to decrease damages and suffering at them as been hit of an accident. In KAMEDO-reports is described true accidents, how among other thing organizational parts been implemented and evaluations of which importance different decisions had. Aim: The aim of the study was to examine KAMEDO-reports concerning prehospital medical management on disaster sites. Method: Eight KAMEDO-reports was examined with focus on organization and management. Results: Four areas in which all could be influenced by the healthcare personnel in leading position was described: Management and Co-operation, Load and Go - Stay and Play, Priority and Triage.

The aim of our study was to investigate how much self-determination persons with intellectual disabilities living in group-homes have when it comes to recreational activities. We studied what the recreational activities looked like, if there was any self-determination concerning recreational activities and which factors influenced self-determination for persons with intellectual disabilities. We used qualitative interviews with persons with intellectual disabilities, next of kin and personnel at group-homes. The result has been analyzed from earlier research, central concepts as self-determination and recreational activities and the theory of empowerment. The most important results that emerged in our study were; that recreational activities for persons with intellectual disabilities varied substantially, that there is a large number of to recreational activities available and no one seemed directly displeased with their recreational activities.

The production costs have steadily increased within the construction industry during the 21st century. Voices are raised meaning that the construction industry is too unsuccessful in making the production more efficient and to develop it?s way of working. One way to deal with the production costs is to minimise the waste, with waste meaning activities that doesn?t add value to the finished product.

The production costs have steadily increased within the construction industry during the 21st century. Voices are raised meaning that the construction industry is too unsuccessful in making the production more efficient and to develop it?s way of working. One way to deal with the production costs is to minimise the waste, with waste meaning activities that doesn?t add value to the finished product.

The purpose of this project has been to cut production costs for the fascia panels ofGetinge?s largest autoclaves. The cost for the stainless steel plates currently used is veryhigh. An alternative material solution could cut costs significantly.In addition, improvements have been made to the instrument tower which is a central partof the fascia panel. As a result of the new modular design in a new material theinstrument tower has been improved in several aspects..

The starting point for this thesis has been the great process of change that Swedish municipalities now arefacing due to the political directive of offering full-time employment to all part-time employees. The aimof the research is to create a decision support model for Swedish municipalities, which simultaneouslyintroduce the offer of full-time employment and an internal personnel pool. The factors that mayinfluence the personnel?s choice of employment level and the quality of the outcome, thus the financial result,are we also aiming at explaining. The empirical observations were found through secondary data as well asobservations from the municipality of Göteborgs Stad.

The aim of this study was to develop a simple model for calculating stock costs for bio fuel at Billerud Karlsborg and subsequently recommending a suitable stock level of bio fuel. The stock components considered in the model are GROT (branches and tops), bark, dry wood chips, raw wood chips from barking and sawdust. The calculations are based on a probability distribution of historical deviations between ordered and delivered volumes. The model presents two different ways to manage the supply in case of irregular deliveries. The first way is to stock enough volume to cover the deviations and the second way is to compensate with a quick purchase from the spot market (at extra high purchase prices).

The aim of the thesis was to explore the attitudes toward social documentation held by care personnel, as well as factors that could have an impact on the process of social documentation. The study is based on a survey encompassing 100 respondents working as care personnel at six different eldercare units at Kungsholmen in Stockholm. The data was analyzed by quantitative methods, using a statistical software package (SPSS). The main questions in the study are whether the respondents know how, what and why they should document, what obstacles they experience and what they would need in order to document more or better, as well as whether there are factors that influence their attitudes and knowledge regarding documentation. The key results show that more time is the most common need, and lack of time the most common obstacle to social documentation reported by the respondents. Furthermore, the results show that those who report that they are satisfied with their working conditions are most likely to also report that they know how and why social documentation should be conducted. These results suggest that it is urgent for organizations to create good working conditions in order to increase motivation for social documentation. The results are analyzed using organizational theories.

This thesis examines the emissions costs of Swedish aviation and their degree of internalisation under current economic instruments. The results show that the degree of internalisation spans from practically zero for a long-haul flight to 6 per cent for a typical domestic flight, where the climate cost, including high-altitude impact, makes up the main part of the cost. To inform evaluation of the consequences of this underinternalisation, or attempts to correct for it using price instruments, the price and income elasticities of international leisure air travel from Sweden are estimated using household expenditure data and two different price measures. The resulting elasticities are very high ? 2.03 or 2.04 for the income elasticity and -2.53 or -1.88 for the price elasticity ? and should be interpreted cautiously due to data limitations, especially for the price elasticities.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.