Dogs presenting with vomiting and abdominal pain, are common patients at the small animal clinic, and the reason for these symptoms can have various aetiologies. One common reason for these symptoms is obstruction of the small intestine caused by a foreign body. Obstruction of the small intestine is best diagnosed by using radiography, contrast-study if needed, and ultrasound. To avoid further examinations, diagnosis from plain radiographs is preferable. One of the signs of illness one can detect from these examinations is a dilation of the small intestine proximal of the obstruction, caused by gas or fluid; ileus.

The thesis mission is to investigate whether the swiveling laser that Vectura (former Vägverket Konsult) has in use to measure the road areas and straddle measuring can be used to detect differences in the reflective road markings function. This is to increase use of the swiveling laser and get rid of the manual measurements performed today.Currently, the measurement of road markings reflective function is performed with both mobile and handheld measuring instruments. The purpose of this thesis is to develop better methods for determination of road markings? reflective function, in order to facilitate the description and suggestions for improvements of the maintenance of road markings reflective function.The questions that the thesis has been to start with are:Can the swiveling laser detect differences in longitudinal and transverse road markings reflective function?The accuracy of measurement has been sweeping the laser over the reference instrument (LTL-2000)Is it necessary with a conversion factor for swiveling laser data against the reference instrument data?To answer the question 2 and 3, there has been a field work in Värnamo where a road stretch with longitudinal road markings and zebra crossing (transverse road markings) has been investigated with a swiveling laser and LTL-2000.The formulas and calculations contained in the thesis are drawn from scientific reports that are produced by VTI in Linköping. The same formula that was used to calculate the optical measurement data was also used for the swiveling laser data.

This report aims at giving you as a reader a basic knowledge in measurement techniques used in the road/land construction and witch instrument and methods that is commonly used. It also tries to shed light on the problem with unfinished or incomplete blueprints, which cause additional work performed by the surveyor. This report is written in collaboration with PEAB Umeå whom has given insight in their work.The goal of this report is to examine what kind of work surveyors has to perform on blueprints delivered by a technical consultant. The reader of this report gets a run-through of the different theoretical measurement techniques used today and a short explanation of different measuring instruments used by surveyors in their day to day work. Computer programs used in the field of construction are briefly explained, and some of the most common file extensions used, for example dwg and Land-xml.The report concludes in a questionnaire that was sent out to surveyors employed by PEAB.

Syftet med föreliggande studie var att försöka reda i litteraturen kring två välkända begrepp inom Affective Forecasting nämligen Impact Bias, som innebär att människor har en tendens att överskatta i vilken utsträckning de kommer att uppleva en viss känsla i en framtida situation än vad som senare visar sig vara fallet, och Empathy Gaps, som innebär att människor har en tendens att underskatta i vilken grad känslotillstånd kommer att påverka deras preferenser i en framtida situation samt pröva dessa begrepp i en och samma enkätundersökning. Etthundra sextiotvå studenter, slumpvist uppdelade i två grupper, Känslogrupp och Preferensgrupp, deltog frivilligt i undersökningen. Enkätundersökningen var en mixad design med grupp (känsla kontra preferens) som mellangruppsfaktor och förtest kontra eftertest som inomgruppsfaktor. I studien visade samtliga gruppers resultat i linje med Impact Bias teorin, dvs. att deltagarna i både Känslogrupp och Preferensgrupp skattade lägre i eftertest (actual) än pretest (forecasting).

Vilken effekt kan teatern ha på ett flerbostadshus? Vilken typ av bostäder blir det, kan det ge något som vi inte ser i bostadsbyggandet idag?.

This study investigates three different methods for evaluating MOE,Modulus of Elasticity, in field measurements. The purpose is toinvestigate the possibility to use dynamic measurement methods infield measurements that hitherto (2010) has been performed with staticmethods. The objects of investigation are 20 glulam beams. The firstfield measurement took place in november 2007 and applied a staticmethod based on the standard SS-EN 408. The second measurement,described in this study, took place during summer 2010, and appliedstatic as well as dynamic methods.The MOE of wood is affected by a range different factors.

Background: Peripheral arterial disease (PAD), as a consequence of atherosclerosis in the arteria of the limbs, affects one of ten Swedes older than 65. PAD can develop slowly and silently, and involves an increased risk for cardiac infarction and stroke. Measurement of the patient´s ankle blood pressure and calculation of the ankle-brachial index is an evidence-based method to discover PAD. Objective: To investigate how district nurses and general practitioners perceive this method of examination and experience possible obstacles to why it is not more commonly applied at primary health care centres. Method: Data collected by semi-structured interviews have been processed by qualitative content analysis with a manifest onset.

The waste of material is a big expense for manufacture companies caused by lack of quality. The cost by lack of quality often totaled to a big percentage share of the turnover when all cost related to lack of quality is included. New manufacturing systems like Lean production or Just In Time demands better internal quality for the manufacturer. To make those manufacturing system with small and none buffer stock successful the quality improvement continuously have to be developed.Measuring of waste of material in Bubs Candy?s factory where not simple due to the products does not have a permanent weight during the manufacturing process.

Strong relationships are something that is really important for companies to succeed with, in purpose to increase and protect their market shares. After major research on the subject, it has been found that variables like exchange of relationship, trust, control mutability, satisfaction and commitment are important in the establishment of measuring a relationship. The purpose with this thesis was to: increase the knowledge on how companies measure, and then consequently evaluate, their relationships. To answer the purpose of the study we chose to do a case study at Stadium AB, which is a retailing concern with a high level of customer contact on a daily basis. The conclusion is that trust most likely is the key variable in measuring relationships.

In many biomedical contexts, e. g. when evaluating hearing disorders, the data obtained can be described as pairs (x1, y1), ?, (xn, yn) where x is a quantitative variable and y a 0/1 variable whose probability of taking the value 1 is a monotonic function of x. One way of analysing such data is to perform probit regression; thereby two parameters, b0 (= the constant) and b1 (= the slope) are estimated; the interest centres around m = -b0/b1, i.

This study investigated the possibility of implementing three standards, Transistion Minimized Differential Signaling (TMDS) and two versions of Stub Series Terminated Logic (SSTL), for inter-chip communication in a specific manufacturing process. The two SSTL standards were implemented in one transceiver system while TMDS was implemented in a separate system. The evaluation was done with Spice simulations on schematic level with some parasitic capacitance and resistance. The idea was to investigate the possibility of implementing these standards and get an idea of eventual shortcomings. In order to create models as a basis for evaluation, simulation environments with models for circuit board and packages were created and transmitters and receivers were designed.

The purpose of the present study was to explore if blood lactate levels are increased in bitches with pyometra, and if the lactate measurement could be used as a prognostic indicator and to determine outcome. The present study included 16 bitches with pyometra that were admitted to the University Animal Hospital, Swedish University of Agricultural Sciences, Uppsala, Sweden. For comparison, a control group consisting of 14 healthy staffowned bitches was also evaluated. In all bitches, a physical examination was performed and blood samples for analysis of haematological and biochemical parameters were obtained. In all bitches with pyometra, surgical ovariohysterectomy was performed and a uterine sample for bacteriological culture and identification was collected.

This thesis is performed at Saab Bofors Dynamics in Karlskoga and investigates a technique for ranging with laser pulses. The investigated technique is called Constant Fraction Detection (CFD). Described briefly, the received laser pulse is split into two equal parts, where one part is delayed half the pulse width and inverted. This signal is added to the original pulse. The resulting curve has the shape of a laying S and the detection of the zero level is used to stop the time measurement.

Booth for operational planning of harvesting and for long term planning, data is today collected manually. Intensive objective field inventories are usually too expensive. To enhance optimisation of timber flow from forest to industry Moore efficient methods for measuring tree stems of standing trees are needed. The performance of terrestrial laser scanners have improved and these could possibly be used within forestry in the future. The objective of this study was to validate how a terrestrial laser scanner could be used to measure stem diameter, and to test how the errors depend on distance from the scanner and tree species. Two plots (one pine and one spruce) were used for this study.

Uppsatsens titel: Penningmängd och huspriser - Finns det något samband?Ämne: Företagsekonomi, Kandidatuppsats, 15 hpInlämningsdatum: 2009 ? 05 ? 29Författare: Gunnar Levin, Viktor SundlingHandledare: Sven-Ola CarlssonNyckelord: Penningmängd, Huspriser, Kointegration, M3, Fastigheter, FASTPI, KvantitetsteorinSyfte: Syftet med uppsatsen är att genom statistiska tester beskriva sambandet mellan penningmängdens utveckling och småhusfastigheters prisutveckling. Vi vill även försöka förklara ett eventuellt samband med kvantitetsteorin.Tillvägagångssätt: I denna uppsats har vi genom att fastställa ett kointegrationssamband mellan tidsserievariabler kunnat genomföra en regressionsanalys mellan penningmängdsutvecklingen och prisutvecklingen för småhus avsedda för permanent boende.Slutsatser: Vi har funnit ett långsiktigt samband mellan utvecklingen i penningmängden uttryckt som M3 och prisutvecklingen för småhus avsedda för permanent boende. Sambandet mellan M3 och fastighetsprisindex för småhus kan förklaras med kvantitetsteorin..