The aim of the work was to investigate the possibility to combine information from PPG and bio-acoustic technology to extract information that is related to the blood pressure. The measurements have been carried out with several different configurations. First the relation between arterial sounds and the PPG-signal was studied. After those measurements with both PPG and the bio- acoustic technique was concluded on people in different positions and after riding a bike. The goal was to vary the blood pressure.

Blood sampling is one of the most important diagnostic tools in veterinary medicine, and this is also true for avian medicine. A properly collected and handled venous sample can be used for serology, biochemistry and electrolyte analysis, as well as for blood smears, packed cell volume and cell differentiation. Caring for sick birds is a challenge for all veterinary staff. Many birds are easily stressed individuals, and to a very ill bird a big increase in stress level can even be fatal. Avian patients who are presented in a veterinary clinic are often in a poor condition, and blood sampling is an invasive procedure that can cause stress to the patient.

The purpose of this thesis is to create opportunities for an efficient interchange of information between humans and technology, especially for the skilled user, and put the designprincipal for informative structures and features into practice. Informative structures and features in a large number of information items helps the peripheral visual system to automatically capture knowledge through logical patterns.A field experiment was done to evaluate if informative structures and features, implicate efficient human information-processing, even in a small study. The results was ambiguous because the quantitative part of the investigation didn?t show any significant differences, whereas the qualitative showed that people prefer a dynamic document with a high degree of informative structures and features over a dynamic document with a low degree of informative structures and features. Even if this study was inconsistent, probably because to few subjects where used, the implication of the research that?s behind it is solid.

Syftet med denna litteraturstudie är att sammanställa litteratur gällande olika typer av förband samt omläggningsfrekvens vid omvårdnad av central venkateter. Författarna har gjort en systematisk litteraturstudie och följt Goodmans sju steg i forskningsprocessen. Totalt inkluderades 15 vetenskapliga artiklar efter litteratursökning i databaserna PubMed, CINAHL, Cochrane Library samt via kompletteringar i ELIN. Artiklarna granskades av två oberoende bedömare utefter modifierade granskningsprotokoll och kvalitetsbedömdes därefter. Resultaten av denna sammanställning visar en tendens åt att sterila kompresser än så länge har ett litet försprång gentemot transparenta förband, i synnerhet när insticksstället inte läkt.

 Genotyping can be used to link genetic variation among individuals to certain diseases or conditions. Some known disorders and states that are dependent on single nucleotide polymorphism (SNPs) are lactose intolerance, venous thrombosis, hereditary hemochromatosis and the difference in sensibility among people to metabolise drugs.In this project a new kit, TaqManÒ Sample-to-SNP KitÔ for extraction of DNA and preparation of the extract for genotyping with real-time PCR and allelic discrimination, was evaluated. QIAamp® DNA Blood Biorobot® MDx Kit was used as the reference method.The purpose of the comparison was to find a method that makes DNA extraction from blood samples cheaper and faster, but with the same reliability as the reference procedure.The results of the evaluation showed a complete agreement of the genotype results between the methods tested, which means that the new method was as reliable as the reference method. The costs of reagents and material would be reduced with 52% if the new method is adopted, that alone would result in a cost reduction of 144 000SEK a year with a sample volume of 650 samples/month. The time for DNA extraction would also be reduced with the new procedure. .

The aim of my study is to illuminate the borders, both spatial and aspatial, that are drawn around Europe in swedish politics by using the word in question in different ways. To increase my possibilites of comparing different concepts of Europe, I have chosen to restrict my study toFolkpartiet and Vänsterpartiet, which are the two swedish parties who seem to stand the furthest from each other on issues regarding Europe and the EU. Using theory on borders and bordering, I construct an analytical framework consisting of a separation of three categories of entities, around which borders can be drawn. In my search for both obvious and implicit ways of filling the word Europe with content, I find that both parties speak of Europe in a highly contradictory way, which both includes and excludes peripheral regions of a geographical Europe. My second conclusion is that both parties tend to associate Europe with things that are positive to them.

Bakgrund: I Sverige lever cirka 5000 personer med spinalskada. Där spinalskadan lett till nedsatt blåsfunktion är ren intermittent kateterisering (RIK) den metod som rekommenderas i första hand.Syfte: Att undersöka hur personer med traumatisk spinalskada som använder ren intermittent kateterisering (RIK) upplever detta. Syftet var även att ta reda på vilka hanteringsstrategier som finns för att underlätta det dagliga livet.Metod: En kvalitativ metod med semistrukturerade intervjuer användes där fem personer med traumatisk spinalskada som använder RIK intervjuades.Resultat: Att behöva tillägna sig metoden väckte blandade känslor. Män upplevde det lättare att RIKa jämfört med kvinnor. Den egna kompetensen och kunnandet om metoden RIK ökade med tiden och de hittade nya hanteringsstrategier för att underlätta vardagen.

This thesis aims to develop proposals and models for a modular electronics construction to a future D250S Dual battery charger. The aim also includes investigation of possibilities to use some of Texas Instruments C2000 microprocessors. The reason for this is that CTEK SWEDEN AB wants to renew the present D250S Dual battery charger and lower the manufacturing costs. The thesis work has involved gathering theoretical facts for the development of a design on the modular electronic construction, the choice on which microprocessor to use, the choice of electronic components and facts about peripheral equipment to the D250S Dual. With the theoretical there has been developed different solutions to the proposed hardware and software solutions with comparisons in aspects of positive and negative.

Bakgrund: När människor drabbas av venösa bensår kan vardagen drastiskt förändras. Ett stort antal individer drabbas av bensår och incidensen ökar med åldern. För att kunna ge en god omvårdnad behöver vårdpersonalen ökade kunskaper för att förstå bensårens inverkan på individens dagliga liv. Syfte: Syftet med studien var att beskriva hur det är att leva med venösa bensår. Metod: Studien utfördes som en allmän litteraturstudie.

The purpose of this study was to describe patients? experiences when living with a venous leg ulcer in physical, psychological and social perspectives. The articles used to describe this condition were found in the databases: PubMed and Cinahl. Ten articles were included in the result: five with a qualitative approach, two with a quantitative approach and three with both qualitative and quantitative approaches. The results were presented through three headings: physical, psychological and social.

The objective of this work was to evaluate and implement a number of energy saving functions for a specific embedded system. The functions were then grouped into a number of energy levels with known properties in terms of functionality, energy consumption, and transition time between the levels.The embedded system consisted of an AT91 ARM9 processor, GSM/GPRS modem, display, Ethernet and other peripheral units. Some energy saving methods that were considered were suspend to RAM, suspend to disk, frequency scaling, and methods for saving energy in the modem, Ethernet, USB and display backlight. The functions were grouped into levels and an interface was specified for controlling the energy level.It proved possible to get known properties within the defined energy levels, even though the paritioning of functions into these levels proved to be sub-optimal in a typical application usage scenario because it was designed for mainly energy consumption, not usage.The final result is a number of energy saving functions grouped into levels, which are controllable via an application interface. Each of the levels have a known energy consumption in both loaded and un-loaded mode..

The objective of this work was to evaluate and implement a number of energy saving functions for a specific embedded system. The functions were then grouped into a number of energy levels with known properties in terms of functionality, energy consumption, and transition time between the levels.The embedded system consisted of an AT91 ARM9 processor, GSM/GPRS modem, display, Ethernet and other peripheral units. Some energy saving methods that were considered were suspend to RAM, suspend to disk, frequency scaling, and methods for saving energy in the modem, Ethernet, USB and display backlight. The functions were grouped into levels and an interface was specified for controlling the energy level.It proved possible to get known properties within the defined energy levels, even though the paritioning of functions into these levels proved to be sub-optimal in a typical application usage scenario because it was designed for mainly energy consumption, not usage.The final result is a number of energy saving functions grouped into levels, which are controllable via an application interface. Each of the levels have a known energy consumption in both loaded and un-loaded mode..

Background: The incidence of caesarean section for breech presentation has reached approximately 90 % in Sweden. In many of these cases, by means of specific selection criteria, it would be as safe to plan for vaginal breech delivery. Aim: The objective of this study was to investigate differences in management and to compare maternal and fetal outcomes according to delivery mode of breech presentation; vaginal vs. caesarian section. The study included breech presentation in full term singleton pregnancies at the UppsalaUniversityHospital, Uppsala, Sweden (UAS). Method: The study was based on medical record data with a retrospective, descriptive, comparative design with quantitative approach. The method for data collection was a manual review of patient records using a structured questionnaire. Results: Of the women with children in breech presentation during the period studied, 11 % gave birth vaginally.

The objective of this work was to evaluate and implement a number of energy saving functions for a specific embedded system. The functions were then grouped into a number of energy levels with known properties in terms of functionality, energy consumption, and transition time between the levels.The embedded system consisted of an AT91 ARM9 processor, GSM/GPRS modem, display, Ethernet and other peripheral units. Some energy saving methods that were considered were suspend to RAM, suspend to disk, frequency scaling, and methods for saving energy in the modem, Ethernet, USB and display backlight. The functions were grouped into levels and an interface was specified for controlling the energy level.It proved possible to get known properties within the defined energy levels, even though the paritioning of functions into these levels proved to be sub-optimal in a typical application usage scenario because it was designed for mainly energy consumption, not usage.The final result is a number of energy saving functions grouped into levels, which are controllable via an application interface. Each of the levels have a known energy consumption in both loaded and un-loaded mode..

This paper deals with three mediaeval churches in the town Visby, Gotland. These churches were located in different areas in Visby. Allegedly the areas where St Hans and Ste Gertrud were located were inhabited by wealthier people, and the more peripheral area where St Mikael was located was where the poor lived. Therefore, the people that were buried at St Mikael should be of lower social status than the people buried at St Hans and Ste Gertrud. Based on the fact that an individuals diet was dependant on his or hers social status, dietary studies on skeletal remains from the three different churches have been conducted to find out dietary patterns among the individuals buried at each church respectively.